Is there a way to test for an active default network printer?
In my module the code sets the paper size and a few other printer settings, if my default network printer is down or offline the code fails.
If I could test for active default printer I could remove this error.
I have a new workbook that needs to be printed to a specific printer regardless of who the user is. I am happy with the method used for doing this using the PrintOut function, but am trying to work out what to do in the event that the user does not have this printer installed. The logic, not in true VBA syntax, is as follows;
' Check Printer
If <This Printer> Is installed Then
Printout using <This Printer>
Else
Install <This Printer>
Printout using <This Printer>
I found a useful post about ascertaining whether or not a printer is installed, but can't find anything about actually installing a printer via VBA.
I am having trouble printing a page to both a local printer (which works fine) and a network printer (which does not work) Both printers are installed on the Computers. The error message I get when I try to run the macro is Run-Time ERror '1004': 'ActivePrinter' of object'_Application' failed. The codes that I have used are
Application.ActivePrinter = _
"\SAUWTPFS01.sopac.pilkington.netDespatch Toughend & Batch reports (L164) on Ne05:"
and
Application.ActivePrinter = _
" \sauwtpfs01pauwtp0305 on Ne05:"
and
Application.ActivePrinter = _
" \sauwtpfs01pauwtp0305"
It works on the day I record the macro. As soon as the next day comes around I get the error message. When I click debug it is these lines that are highlighted in yellow. I have looked at this for several days on and off and I always get the same error.
I have excel printing some sheets to pdf and it works fine on my PC. WHen someone else tries to print it wont work because they arent on "Adobe PDF on Ne02:"...they maybe on Ne03 or Ne08 or ne05...you get my point.
I saw code on here before as to how to find the proper "port" but after a bit of searching, i cant find it again.
Application.ActivePrinter = "Adobe PDF on Ne02:"
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF on Ne02:"
I want the user to be able to choose a printer but not print at that time.
1. Store the active printer as a variable using application.activeprinter
2. Have a dialog box (the printers available) popup and have them choose one, then store that
3. I know how to do the rest, but I will have the word document print out with the selected printer, then use the application.activeprinter reset to the original one
Is there a way to set the printer's properties using VBA?
Sometimes we set the printer for BEST quality to do photos or brochures. Well if we don't change it back, when we go to print a spreadsheet, it takes forever because it is set on best quality.
So......
I want to be able to set the print properties to normal using VBA.
I need an assistance in setting up a VBA for the default printer in my office. The issue is I want my spreadsheet to be set up to wherever I open the spreadsheet at any computers in the facility. I want the sheet to be printing out directly at the printer in my office only. Is there a way to do this?
View 9 Replies View RelatedI have a form that all the salespeople use. The last thing in the process is to print the completed form to a specific printer. I recorded a macro to get the proper name of the printer but I am finding out that it records differently for each computer. Is there a way around this?
View 9 Replies View RelatedI have a quality form that is produced from data on an Excel log file. I was wondering if it is possible to select a different network printer based upon the value of a certain cell.
I understand how to print using the local machines local printer but our quality department is located at one site and these forms need to be printed at our other locations.
I have a spreadsheet where I am trying to print barcode labels. The barcode is found in cell A1. I have looked in a lot of places and I can't really figure out exactly how to do it. This is the code that I have so far but it gives me an error. The printer name should be right. Some of this code I just copied from another thread.
[Code].....
how to automate the printing of Excel sheets each with a different name to a Cute pdf printer?
I have a VBA procedure which uses Windows API calls to write to a system ini file (which I understand is a necessary requirement of the Cute software), which loops through all the sheets I need to print, and sends them one by one to a Cute pdf printer. However each time the 'print' instruction is invoked - I say print but of course this is really a file save process, the Save As dialog box pops up asking the user to confirm the save.
What I want to achieve is the file gets saved automatically, with the relevant sheet name with no confimation dialog box.
I have got a buttion that changes various layout and borders for the page then shows a printpreview, after printprewiew closes.
Then a msgbox that askes if you would like print. Is there a way to change the defult printer between local printer and adobe distiller(.pdf) as a dropdown option box. Or Yes for Local printer and NO for adobe distiller(.pdf) using vbYesNoCancle.
i have a workbook system that is used on 25 standalone machines that all have different printers everytime i install on a new system i have to reconfigure all of the printers that i have set up in VBA i am curious to find out as to whether or not there is a macro i can use that will generate a list of all printers on a machine that i can then use to refrence a printer name in my VBA
View 3 Replies View RelatedI have a file for which I wish only selected pages to be printed, so I have disabled the print function in the ThisWorkbook module. Instead, the user chooses from a menu of available sheets to print, via a user form, and then requests the print.
I've got most of this sussed in my mind, but the users need the option of which printer to use (loads of networked printers available and the choice will depend upon monochrome for draft print or full colour for final print), so I want to be able to call up the printer dialog box using
Application.Dialogs(xlDialogPrint).Show
BUT!!!!
I want all the options on the dialog box disabled, except for the choice of printer as clicking OK after choosing the printer adds the active sheet to the list of items to print.
In my program I want some labels to be printed on printer P661 (black/white) and other labels on printer P656 (color).
Q: is it possible to do this in vba for my code?
The labels are made in Word and printed from within Excel.
Sub PrintNACL_LABEL()
Dim oWord As Object
Dim sPath As String
Dim iCnt As Integer
sPath = ThisWorkbook.Path & Application.PathSeparator & "NACL_LABEL.doc"
iCnt = Val(InputBox("Hoeveel exemplaren?", "NACL_LABEL", 1))
If iCnt >= 1 Then
Set oWord = CreateObject(Class:="Word.Application")
With oWord.Documents.Open(sPath)
.PrintOut Background:=False, Copies:=iCnt
.Close False
End With
oWord.Quit False
End If
Set oWord = Nothing
End Sub
The specific printers in the network are:
Color ---> "\PlantijnP656 op Ne00:"
Black/white ---> "\plantijn2000oldP661 op Ne02:"
i am using windows xp, and i am printing from a matrix printer, so i go to file then print then on the top right of the dialog box it say properties, and i go there to change the printers speed and darkness, the i click ok to print.
I have a workbook with 150-some-odd sheets, each with a store number. I would like to loop through each sheet & print that sheet to the printer with the same name in my printers & faxes queue.
(eg. sheet 9604 would print to printer name oki9604)
how to identify in code which installed printer is set as the default printer? I can set/switch printers easily enough but don't seem to be able to identify the default printer as opposed to the active printer...
View 6 Replies View RelatedI'm trying to save excel files as pdf using vba code and the cutepdf printer. If I do this manually it works, but when I write code it saves the output to a file that cannot be read or opened
Unfortunately I don't have access to the pdfdistiller so can't use this technique which I've seen described in a number of forums.
The code I've used is below.
[PHP]Sub pdfing()
Dim cntTrue As Long, cnt As Long
Dim rng As Range, bk As Workbook
Dim fName As String
Dim WB As Workbook
Dim FundName As String
Workbooks.Open ("S:SRQFSFCWNames")
Range("A1").Select
Do
FundName = ActiveCell.Value
fName = Dir("S:SRQFS" & FundName & ".xls")
Do While fName <> ""
Workbooks.Open ("S:SRQFS" & fName), UpdateLinks:=0
cnt = cnt + 1
fName = Dir()
Application. ScreenUpdating = False
Loop
ActiveWorkbook.UpdateLink Name:=ActiveWorkbook.LinkSources
Range("A3:X3").Select
ActiveWorkbook.Save
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null.
I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it.
I've attached the spreadsheet so you get a better idea of the problem that i encountered.
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
Is if possible to set up two different sheets in the same workbook to print as front and back pages on a duplex printer?
View 7 Replies View RelatedIs there a Macro to automatically print the selected print area (print area is also established within the macro itself) to a user's default printer; whatever that printer may be? Note that this printer and/or printer name could change depending on the user.
I would like this to actually select and print to the default printer without Excel having to ask you. I don't even want the "OK" box to show up if possible. I just want them to run the macro, execute all it's duties, and print, all in 1 shot.
i have a macro that loads a userform for previewing and printing selected sheets. The macro works fine for previewing sheets but when i choose the print button the marco trys to save the file as a .mdi, i want this to select the default printer on the pc instead, the excel file will be onpened on many different pcs so the printers will be different on each machine, hence why i want a default printer selected. This is the section of code from the form
View 2 Replies View RelatedI have my buttons working, but I need too have it return to the default printer after a button is used. If I send it too PDF it will not let me print it. Is there a way too go back too default printer each time?
View 2 Replies View RelatedI am trying to swith between different printers to print out sheets within a single workbook. Recording the macro doesn't work very well and the code I found online doesn't work either (error: object doesn't support property).
How can I set this up to be a dynamic printer setting?
Code I tried:
create an array of active printers. I edited the code to write the array to a range, then populate a data validation list with the printer names. All works great. The goal was to select a printer name from the list and run a macro to print some sheets. However, the function doesn't bring back enough of the name to do this. how to edit the function to bring back the whole name.
For example: after running the function the 1st printer returned ="\rizzoHQ-ENG-04"...when i record a macro to print to this printer it needs ""\rizzoHQ-ENG-04 on Ne05:". Here is the function unedited, I bolded the part i think is controlling the name:
I have done a userform which allows the user to select printing to each section(All, A, B or C) of the report to either paper size A3 or A4 looking something like below -
Print All A3 A4 (these buttons are option buttons)
Print A A3 A4
Prtint B A3 A4
Print C A3 A4
I have coded and part recorded a macro to change the paper size to either A3 or A4 depending on the user's selection.
The problem i have is if i take out the print command, it seems to change the paper sizes as it should but when i print it prints to the same size as the previous print i did, regardless of what was selected on the userform.
I have a printer with multiple tray sizes, and since I need to change paper sizes, I assume i need to change trays as well.
Below is the two macros -
'''''''''''''Set Print area and print to A3'''''''''''''''''
Private Sub PrintAllA3_Click()
Dim LastRow As Long
Dim LastCol As Long
With ActiveSheet
LastRow = .Cells(.Rows.Count, "A").End(xlUp).Row
LastCol = .Cells(2, .Columns.Count).End(xlToLeft).Column
End With
[Code]....
What code can I write to print Sheet1 and Sheet2 on specific Printer and Sheet 3 to another printer, then all other sheets to another printer.
View 9 Replies View RelatedI want to automate (with the click of a macro button, or hot key sequence) is to:
· take a pre-set print area (which is always the same – 1 page wide x 1 page tall)
· send to the printer
· select the PDF printer from the list (not the default printer for the computer)
· Automatically change the save PDF file name to “(Cell A1) – Weekly Update – (Today’s Date).pdf”
· Change location to save file on Desktop
Feels like a pretty lofty goal for a macro to do all of that – please let me know if that is even possible to set up.
