Add Nest Formula/Function To Cell With Variables Via Macro Code

May 22, 2008

I would like to use a varible Cell for the following forumula:

ActiveCell.Formula = "= ROUND(PIExpDat(""TimeEq('""&Cells(RowNdxG,4)&F$2,F$3,F$4,F$5,0,)/3600,1)"

I have underlined the variable. This is not working but is rather showing up as a string value Cells(RowNdxG, 4).

View 6 Replies


ADVERTISEMENT

Macro Code To Add Sum Formula/Function, With Variable Rows, To Cell

May 29, 2008

I am having to copy and paste rows of data into a new worksheet where the rows sizes change and I am wanting to add a new row at the end of the pasted rows but with the sumation formula to add the relevant column

e.g copy range B14:AA17 with in this case columns E to AA holding the numerical values. Therefore I wish in cell E18 to sum the value of E14:E17 and so on ending with cell AA18 holding the sum of AA14:AA17

As these vary I have all relevant variables, Range to add sumation values to eg E18:AA18
Start Cell E14 and so on.

I tried adding "=SUM(x:d)" where x and d are vars relating the the column cell required eg x = E14 and d = E17

View 3 Replies View Related

Add Vlookup, With Variables, To Cell To Reference Another Workbook Via Macro Code

May 21, 2008

I am trying to use VB to vlookup between to workbooks
1. Make active workbook WBK1
2. Make workbook being open WBK2
3. Copy and Paste between WBK1 and WBK2
4. Have a vlookup in WBK1 and bring in the values from WBK2
5. Close WKB2
6. Copy, Paste, and transpose values in wkb1 within wkb1

The script works fine until it reaches the vlookup step. I have used the vlookup by itself without the copy and paste code successfully but when I combine the two it provides me with the error 9. Subscript out of range.

View 9 Replies View Related

Nest A SUM Function In A VLOOKUP?

Apr 28, 2009

I have a template with multiple sets of the same categories. I want to consolidate the data for each category in a summary. However - the template is expandable by using a macro - so the number of SETS of categories is not fixed. So a simple SUM function won't work since the list of cells expands. I don't want to re-write the formula each time and the method I have is "brute force" with lots of extra columns.

My thought - If I do a VLOOKUP for "Design" and the data is the "unit cost" column can a formula be written to see all the occurences of "Design" and SUM the "unit cost" returns?? example book is attached. hit the "add option" button to see the way the sheet expands.

View 4 Replies View Related

Macro To Add Nested Formula To Cell With Variables

Jun 20, 2008

I want the range in the VLOOKUP below to display its actual value - ie "'6 June 08'!$A:$C" in the formula rather than the actual variable name 'strResult'.

Sub PreviousCount()
strDate = "6 June 08"
strColumnRange = "$A:$C"
strResult = "='" & strDate & "'!" & strColumnRange

Dim i As Long
i = Range("A2"). CurrentRegion.Rows.Count
Range("D2:D" & i).FormulaR1C1 = "=IF(RC[-3]="""", ""Column A blank!"", IF(ISNA(VLOOKUP(RC[-3],strResult,3,0)), ""NEW INSTALL"", VLOOKUP(RC[-3],strResult,3,0)))"
End Sub

View 4 Replies View Related

Function Back Variables: Function Give Two Or More Output Variables

Jul 27, 2006

Can a Function give two or more output variables. e.g.

Sub a()
x = 5
result = Y(x)
End Sub

Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B

this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.

View 2 Replies View Related

Nested If Formula/Function With Other Variables

May 14, 2008

I am creating a worksheet and I have a formlua where the value is text. I can make it work standing alone but not with other variables. =IF(E11=S1,0)+(IF(E12=S1,0)+(IF(E13=S1,0.0025))+IF(E14=S1,"Call for Prciing"))

View 2 Replies View Related

Add R1C1 Formula With Code & Variables

Sep 4, 2007

I am using follwoing vb code to enter formula to sum a range. However it is giving sum of different range.

Cells(Row, Column).FormulaR1C1 = "=SUM(R[" & a & "]C[" & b & "]:R[" & x & "]C[" & y & "])"

Where a, b , x and y are variables containg starting row, starting column, last row and last column value like a=19; b=3; x=24 and y=3. When i check the formula in that cell, it appears as Sum(F25:F30)

View 3 Replies View Related

Concatenate Function To Cell Macro Code

Mar 8, 2008

Need to take column J20:J255 and column K20:K255 and concatenate into activesheet K20:K255. This needs to happen when OptionButton1.Value=True. The information in each cell will be different. The following code works well, but it will not allow me to put a space in between the two strings.

Private Sub OptionButton2_Click()
Dim DescriptionCell As Range
Set DescriptionCell = ActiveSheet.Range("D20:D54")
If OptionButton2.Value = True Then
With DescriptionCell
.NumberFormat = General
.Formula = "=CONCATENATE('Bill of Materials-3'!F20,'Bill of Materials-3'!I20)"
End With
End If
End Sub

View 2 Replies View Related

Add AVERAGE Formulas To Cells Using Variables In Macro Code

Apr 15, 2008

I am trying to have the formula =( SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Put into cells through vba. What I did to get the formula is typed it into an excel cell to find the average of a group of cells that do contain blank cells. The formula brought out the proper results. So all I did is put the formula into vba and changed the appropriate parts. The range will not be the same of course, but there is what I have.

ActiveCell.Formula = "=(SUMIF(" & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & ","">0""" & "," & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & "))/(COUNTIF(" & ActiveCell.Offset(orow + 2, 0).Address & ":" & ActiveCell.Offset(-1, 0).Address & ","">0""" & "))"

When I show a msgbox for ActiveCell.Formula (Msgbox activecell.formula), it shows me the formula as above - =(SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Except instead of the s:ranges, it shows $L2:$L125 (which is correct). The quotes do show up around the criteria in both the sumif and countif. I keep receiving an error. I put a msgbox err.description & ", " err.number dialog in. The error comes up as ", 0" (no quotes).

View 2 Replies View Related

Unzip Code - Works Without Variables, Breaks With Variables...

Feb 5, 2009

Unzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...

I have the

View 2 Replies View Related

Insert Relative Function That Uses Variables Into Cell

Mar 4, 2008

I am using VB to insert a function into a cell on an excell worksheet. The relative references work fine. For the absolute reference, I want to use a named range (LowTotal). If I simply put the name into the function, then I just get the name as text in the function. The second insert formula is were the named range is intended to go. Here is the code so far...

I need to know how to use the varriable name in the .formulaR1C1, so that VB knows it is a variable and not just text....

View 4 Replies View Related

Run Macro Based On Result Of IF Function/Formula In Cell

Sep 14, 2006

how to run a macro from an IF function, if the function is true macro 1 runs if the function is false macro 2 runs.

View 2 Replies View Related

Macro Code To Replace Part Of Formula With Value Of Certain Cell

Jun 18, 2014

Here is the code I'm working on:

I want this code to replace the value of s with the value of a cell.

sub Macro2()
Dim s As String

s= value of (cell F2)
Range("I8").Select
ActiveCell.FormulaR1C1 = "='[(s).xlsm]Payroll Computation '!R8C11"

End Sub

View 5 Replies View Related

Create Macro Code That Auto Fill Cell With Formula?

May 23, 2014

When I enter data in the cells A1 and B1, C1 needs to calculate the result. (not copy and paste)

For examle: I have formula C1=(A1+B1)/2

C column for formula, but shows result only when there is a data in A and B

View 7 Replies View Related

Check & Change Cell After Adding Formula Via Macro Code

Apr 17, 2008

The loop is putting the correct formula into the cell - but THEN... - I wish to (within the loop and before it moves on) check if the value is equal to OR greater than 1 - if it is, make it a value of 1 (this '1' is then used at the bottom of the column of data to give a total). I need to do this before it moves onto the next cell. What am I doing wrong? Is it because once it puts formula in the cell, it then moves down - do I need to select the cell again first? As I had originally posted on this site - link: url]http://www.excelforum.com/showthread.php?t=641970[/url]

View 2 Replies View Related

Add Formula To Cell To Equal Product Of 2 Other Cells Via Macro Code

Apr 18, 2008

I'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors

Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"

When I record a macro it gives me this, but again, I need the last cell in terms of "T"

ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"

View 3 Replies View Related

Insert Relative R1C1 SUM Formula Into Cell Via Macro Code

Apr 24, 2008

Hello I'm looking for some clarification about how to use "= SUM(RC:RC)". I don't understand what the RC:RC represents. I thought that this was the directions for where to "position" the formula, but I think I'm missing something.

I was able to include the correct cells that I need summarized, but the answer is not right; it's zero.

Public Sub SubColumn(CritStr As String) ...

View 8 Replies View Related

VBA Iterate Through Variables In Cell Formula

Dec 19, 2013

I have a spread sheet that has various references

on the same sheet
on a different sheet ( in same workbook )
on a different sheet ( in a different workbook )

If I click on a example cell it might say

Code:
=5*C4*$D$1-Sheet1!C9

Is there a way for excel to be able to iterate through these separate variables ? and know if the reference is on the same sheet ?

Say I wanted to evaluate the references on other sheets ( replacing the link with the value )

So if Sheet1!C9 contained the value 10 the formula would be replaced with

Code:
=5*C4*$D$1-10

View 2 Replies View Related

Passing Variables And Values Between Sheet Code And Module Code

May 13, 2009

I have some buttons in different sheets in an excel file, each button has its own code, that is the reason I can not move the code related to each object to another location (sheet or module).

And I have one piece of code in Module1 (Auto_load) in order to execute automatically this routine every time file is opened. Inside "auto_load" routine I initialize some values of some check buttons,options buttons and positions of some objects in diferent sheets, but I can not pass the value of variables between Module and Sheet's code even when I declare as public variables and/or function.

I have the following structure: ...

View 11 Replies View Related

Create Active Cell Formula Based Of Variables From Given Cells?

Apr 20, 2012

I am trying to create an active cell formula based of variables from given cells.

With ActiveCell.FormulaR1C1 = "=CONCATENATE(""RU"",RC[-12],RC[-11],RC[-10],RC[-9])-CONCATENATE(""MU"",RC[-12],RC[-11],RC[-10],RC[-9])"
ActiveCell.Formula = ActiveCell.Value

But This does nothing.

View 5 Replies View Related

Worksheet Function In VBA Macro Code

Apr 24, 2009

I am trying to write a function in excel to use the worksheet function "small" In the vba immediate window it doesn't return anything and in the spreadshhet I get a # NAME? error when called in a cell the code is below.

Sub UseFunction()
Dim myRange As Range
Dim answer As Integer

Set myRange = Worksheets("Sheet1").Range("A1:F6")
answer = Application.WorksheetFunction.Small((myRange), 1)
MsgBox answer
End Sub

View 3 Replies View Related

VLOOKUP Function In Macro Code

Mar 18, 2008

Is it possible to Call the inbuilt Excel Functions (like VLOOKUP) in Macros. we have to pouplate cells with formula which uses VLOOKUP. one way was to update each cell with required Formula like: [code] Range("A1").value = " = 6*F7*(1-Vlookup(lookupvalue........))"[code] but this was stupid as no of cell to be populated was large and variable and moreover it will return formulae to cells rather than fixed value. What we tried was to defile an table_array as Array(x y) and then use this array to return required VLOOKUP value. However I was thinking is there any way to call function like VLOOKUP in Macros so that we can return a value to cell rather than formula.

View 3 Replies View Related

OpenText Function In Macro Hangs Unless Stepping Through Code In Debug

Oct 29, 2009

We have had a macro running for a few years (Excel 2007 now, but started in 2003) that imports about 35 text files into separate sheets, creates a calculated SUM field for each sheet and copies that value to a title (or summary) sheet. We use this 2 to 4 times per year at inventory time, copying to a new file and deleting the old data before running the macro. The imported files initially create new workbooks, but the data is copied to the initial workbook into a distinct sheets for each file.

Recently (well, last August) this macro started hanging after importing (Workbooks.OpenText) a number of files, and not necessarily the same file every time (on repeated runs.) While trying to figure out the problem, I have now managed to get it to hang every time on the first file! However, if I am stepping through in the debugger it continues past the OpenText command and on F5:Run/Continue will then continue processing the rest of the files normally. If I delete the first file before running the macro, it then hangs on the second file instead.

Without debugging, the first file will import, display on-screen, and there it stops. If I put a break-point on the very next instruction after the import, that break-point is never reached. THINGS I'VE TRIED:.......

View 2 Replies View Related

IF Function With Three Variables

Feb 14, 2013

I'm having trouble with my logic again :/

AREA
Tp std
Tp

30
5

So I want the Tp in the 3rd column to show the result:

IF AREA is less than or equal to 20, Tp=Tp std / 2

IF AREA is between 20 and 40, Tp=(((AREA-20)/(40-20))*(Tp std/2))+(Tp std/2)

IF AREA is 40 or greater Tp = Tp std

But as one equation

I have just been struggling with the range part.

View 2 Replies View Related

How To Nest References

Jul 31, 2009

What I'm wanting to do is essentially use a reference to update yet another reference.

In more detail, I want to retrieve a value on a worksheet and use that value to alter yet another reference to another worksheet.

For example, I want to retrieve a value (let say its 16 from either a local cell or a cell on another worksheet) and then retrieve yet another value from another worksheet based upon that value (lets say the worksheet I would want is then "Subject 16").

I've attempted various nesting formats of the typical reference formula but obviously have had no luck. Would I need to use VBA or is there a simple solution that I am missing? If I do have to use VBA how should I go about doing this?

View 14 Replies View Related

INDIRECT FUNCTION With VARIABLES

Feb 14, 2007

I have and Indirect function that works.... I need to modify it to include a cell address reference, but this requires the use of a Vlookup function to find the address ....

I have this formula: but it does not work

I'm not sure how to include the VLOOKUP function in my argument to
[/quote][/code]=INDIRECT(CELL("contents",B3)&"!&Address(VLOOKUP(B16,'1'!B:AE,match(RAY_ANALY!D2,'1'!B2:AE2,0),0)")

View 9 Replies View Related

VBA Macro Code Needed To Run The Code Contained Within A Cell

Dec 17, 2008

I have a macro that, when run, needs to read the contents of cell B5, and run the code that it contains.

Cell B5, for example, would contain the text:
Range("B13").Formula = "SUM(D12:D14)"

I need a macro to "execute this code", as if it were in the macro itself.

I have assigned the above to a variable, but am not sure how to execute it.

EG.


Dim the_calc
the_calc = Range("B5").value

Now, how do I run the_calc ?

View 9 Replies View Related

Nest If With Multiple Criteria

Sep 6, 2009

In (C2+) it should display one of the following results - "Listed", "-" meaning not listed, or "Listing Ended". This is worked out from the corresponding dates to the right of "Selling Status" and in (G2) which contains the current date. So when there is nothing entered in (D2) "Selling Status"(C2) should display "-", if a date is entered into (D2) it should then go to "Listed". This part I’ve managed to accomplish, however, when I try add the next part to the equation, it doesn’t seem to like it.

If "Listing End Date"(E2) is less than the current date(G2), "Selling Status"(C2) should then go to "Listing Ended".

This is the current formula I have (below) which does actually display "Listing Ended" However it also contains the "Listed" which it should over right.

Current Formula - =IF((D2=""),"-","Listed"&IF(E2<G2,"Listing Ended",))

View 7 Replies View Related

Nest Lookup With If And Statements

Feb 13, 2008

I have the formula below:
=IF(OR(LEN(B2)=0,C2>0),"",IF(AND(VLOOKUP(A2,$A3:$D$99,4,FALSE)=D2,VLOOKUP(A2,A3:$D$99,3,FALSE)>0,B2> A2),"Possible",""))

It should bring back the result "possible" when C2 is negative and D2 (name) matches other D cells while B2 (date) is greater than the A cell (date) for the corresponding matched d cell also the corresponding c cell is positive.
But I think the formula is not incorporating b2> corresponding matched column a.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved