I want to add hours to a date-time cell to get result in date-time.
Format of cell A1 is d/m/yy h:mm AM/PM
Format of cell A2 is General
Format of cell A3 is d/m/yy h:mm AM/PM
I want to add A2 (number of hours) to A1 to give A3.
The formula I used is A3=A1+Time(A2,0,0)
The formula works perfectly fine when A2 is less than 24, but when A2 is more than 24, the date doesn't get changed.
I have a problem concatenating time in excel if it is of Date + Time format..
What formula do I use to just add the time by, say, 3 hours? I'll need to use, say cell B2, which will add 3 hours to it.. What formula do I use?
I have a data of complaints where I need to present it to the Management in such a way that the SLA period of 8 hours does not pass. Our office working hours are 7 AM till 7 PM. The complaint received should be escalated to concern section within 8 Hours of SLA time. I have the list of dates with received time. The complaint which could not be escalated today would be escalated next day. In this case is should deduct 12 Hours (7 PM to 7 AM, Non-working hours) from the time. How can I insert escalation date so as that it would deduct non working hours from it.
View 5 Replies View RelatedI have a started time of say 8am from cell B3. I want to know what time it will be when I add a full number (hours) from another cell. For example A3+B4 where A3 is 8:00 A.M. and B4 is 4.04. I'm looking to get the a result of 12:04 P.M.
View 4 Replies View RelatedI would like to take this VBA a step further. What I want to achieve is to date & time stamp a worksheet in cell A1 if any other cell within the sheet is altered. Below is the VBA I used today to enter the info if cell A1 is changed. Can anyone please help with my new target.
Just one more question: When a shared file is used is it possible to also enter the username of the person who's made the alteration.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
' Only look at single cell changes
If Target.Count > 1 Then Exit Sub
' Set Target Range
Set rng = Range("A1")
' Only look at that range
If Intersect(Target, rng) Is Nothing Then Exit Sub
' Action if Condition(s) are met
Target.Offset(, 1) = Format(Date, "d mmm yyyy") & " " & Format(Time, "h:mm") & " Hrs"
End Sub
I can't figure out how to get a date/time stamp to show when the spreadsheet was last updated.
View 9 Replies View RelatedI found the code below in a previous tread, it works great, but i need some help altering it. I have it set-up when someone puts their initials in column B the time and date inputs in column S. But it also inputs if I hit delete or clear contents when I need to clear the form. Is there a way to make it input the time and date ONLY when letters are entered in column B?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 2 Then
Application.EnableEvents = False
Target.Offset(0, 17).Value = Now
Application.EnableEvents = True
End If
End Sub
I need a formula to add just the time to ' date and time', ignoring weekends.
eg:
Fri 24-Aug-07 10:52 is the date and time
28:48:00 is the time
If I add the time to 'date and time', result is coming as Sat 25-Aug-07 15:40
But it should come as Mon 27-Aug-07 15:40 (hence ignoring weekend)
I am having a very difficult time making this work, if there is anyone who can assist me, I would greatly appreciate the assistance. You can see below what I am trying to do. The entries between the last cells H,3 & K,3 just contain data that is not affected by the rest of the sheet functions.
Cell one (A,3) has a drop down menu for vehicle status.
(B,3) vehicle number
(C,3) Drop down vehicle type.
(D,3) is for dept.
(E,3) Date/Time stamp auto generated from (A,3) entry. (Vehicle Status)
(F,3) is POC.
(G,3) Phone/email.
(H,3) Date & Time stamp out of shop. (This cell will recieve the date & Time Stamp from entry of work done in (K,3)
I am trying to automatically date/time stamp a row when I copy entries I purge from other worksheets.
View 3 Replies View RelatedLooking for code that auto updates today's date in column C, when cells in either column a or b of the same row are edited or changed. I have never used VBA before, just browsing forums for something that might work. I think I'm close with this one, but maybe the offset is wrong - it populates the date in column b when a change.
View 2 Replies View RelatedI have a userform that completes various functions and updates cells when a single button is clicked. Can I add code to the the end to enable a cell to be updated with the time and date, say cell A1 for example? Also is it possible to have the (Windows) username in another cell (all users will be unique) so it will save Jo Bloggs for example? I know this is possible as a Worksheet function:
View 2 Replies View RelatedIs it possible to use a macro like the one below, and have the second location save with the date / time stamp in the name? This is what I need to accomplish: I have a few folks that need to make changes to a master spreadsheet daily. The spreadsheet is in a Network share that when modified and saved, will save to that network share, but also locally. Can the second location have the date/time stamp added to the name of the file so that I know when the changes were made and have an audit trail ? This will also keep a copy of the last modified file in case the spreadsheet is corrupted. Here is what I have for saving to 2 locations:
View 3 Replies View RelatedI'm trying to develop a simple time / acitivity capture sheet for a time and motions study. I have a sheet called "Front" with a project number in C2, an activity drop down in C4 and a comments section in C6.
I need to paste these into sheet "Database" into the first blank cell in B:B for C2, C:C for C4 then stamp the date in the same row in D:D and the time in E:E.
I need a function that records the time and date in a cell, say a2, when data in entered in to another cell, say a1 in the same spreadsheet.
This way I can tell when data in a cell in my spread sheet is updated.
I've got a simple save macro below and was looking for a way that when this macro saves the file can it add the system date and time to the name.
'ChDir "C:
ashfinch"
' ActiveWorkbook.SaveAs Filename:="C:
ashfinchNFC-ORDER.XLS", FileFormat:= _
' xlNormal, Password:="", WriteResPassword:="", ReadOnlyRecommended:=False _
' , CreateBackup:=False
I have a column (D) where I put percentages complete of a task. When that reaches 100% I want to put the date in column (C).
I found many samples online but nothing I can modify to do this.. This one is pretty straight forward but I'm not sure how to have it look for the value and not just empty or not. I would be greatful for any help you can offer.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 4 Then Exit Sub
If Target.Row = 1 Then Exit Sub
If IsEmpty(Target(1)) Then Exit Sub
If IsEmpty(Target.Offset(0, -1)) Then
Target.Offset(0, -1) = Date
Target.offset(0, -1).numberformat = "yyyy-mm-dd"
End If
End Sub
I work in a sales team, and am currently planning the new year of sales spreadsheets (tracking prospects and orders) These spreadsheets are linked in both directions to the Sales Director's summary spreadsheet (so that she can set the targets, and also provide a summary to the MD). She has asked me whether it is possible to put a formula in that gives the date each line (1 line = 1 prospect) was updated (so that she can see whether information in the line is current / a week old / a month old etc)
Effectively, what I need is in column A a formula which references columns B-Q and if any of those change, puts in the date of change. Is this possible, or am I going to have to ask the sales guys to do it manually? I have tried to use the =Now() function, but, because the spreadsheets are linked, and auto-update on opening, every time the spreadsheet is opened, each line goes to today's date.
The previous threads that I looked at suggested either: volatile time stamp in shared workbook
or
That is bad design, Enter =NOW() to a single name cell named cell and use date =MyD-T in ALL cells needing the Date & Time. Where MyD-T is the named cell. I would advise STRONGLY against using Manual Calculation as it's NOT good spreadsheet design and a mistake waiting to happen.
If i have a start time of 5:00 am and a finishing time of 4:25 pm, what function do i use to get the total time of 11 hours & 25 minutes?
View 10 Replies View RelatedI am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies View RelatedWhen I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies View RelatedIn my job, my team have to take phone-calls from stores asking various questions. In order to combat this, I have set up a call tracker to see where the calls are coming from (so we can beat them with a stick). I have asked my colleagues to record the date and time of the calls.
I need a big button at the top of the page that says 'New Call'. Then, when this button is pressed, the time and date stamp will automatically be put into cell A3, then when pressed again a4, and again a5... and so on.
I am struggling with the following:
-Using CTRL + Shift + : to input the date/time on a macro inputs the date I made the macro, not the date/time the button is pressed!
-I can only get the date to go in cell A2 - If I press it again, nothing happens. how to do this, or just do it for me
i need to put a date stamp when a change is made in b3:b31 into e3:e31 for each row also i need to put a date stamp into g3:g31 when a change is made in F3:f31 i try to use 1 "worksheet-change" and it is fine once i use 2 i get Ambiguous Name Detected errors
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Count > 1 Then Exit Sub
If Not Intersect(Range("b3:b31"), .Cells) Is Nothing Then
Application.EnableEvents = False
If IsEmpty(.Value) Then
.Offset(0, 3).ClearContents
Else
With .Offset(0, 3) ............
So I'm having a problem trying to make this scheduling sheet.. What I did was row a would be the employee list then b,c,d and so on are mon-sun Originally in b1 I would put like 9am-5pm and c1 8-4 and so on and in row i I put the total and added a sum function but somehow it wasn't able to calculate. So then I redid the whole thing this time in row b1 i put 9am and c1 5pm and so on and again I put the total and added the function and it still came out wrong..
View 2 Replies View RelatedI am trying to create a time stamp that shows elapsed time. So I enter my start time, and if I enter any text in cell B7, return the elapsed time in A7 based off of start time in A6. I have attached an example workbook.
View 2 Replies View Relatedfind a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
08/03/2013 13:32:00
02/04/2013 09:32:50
I want to put a permanent date & time stamp in cell A1 (date) and cell A2 (Time) when cell A3 is populated by any character which would be an inputters initials.
I'm thinking that it will be an "IF" statement but then I am getting confused about how I make it not update when the spreadsheet is opened at a later date and time.
I have two identical web query's on the same sheet. One from column A to column I and the other one from column K to column S, and both have 404 rows. The one on the left (from column A to I) autorefreshes every 60 minutes and the one on the right (from column K to S) autorefreshes every 4 minutes. I want to subtract the numbers in column Q from column G and the ones in column R from column H, and in both cases if the result is bigger than 0 to place a timestamp in column Y(for Q-G), and in column Z (for R-H). I tried with NOW formula, but the timestamp changed every time the web query from the right autorefreshed, no matter of the result. I guess that I have to use VBA codes...but I'm not good at that .
View 9 Replies View RelatedI m Trying to add some features to it and run into an issue. Here are the fields we are working with!
A1= 13:30:00 17/12/2008
(in other words 1:30pm on date given) - Need to know proper cell number format!!
B1= 23:00:00
(this represents 23 hours) - format for cell is [h]:mm:ss
C1= Unknown function
(This field is my problem!!)
Answer here SHOULD be "14:30:00 16/12/2008"
I need a function for C1 (using A1 and B1) that will give me the time and date 23 hours earlier or however many hours:mins:secs is specified in B1! Also need to know what number format to use for both A1 and C1
I've got a simple code that creates a new text file in which progress of the macro is logged. I wanted to add also time stamps at the end of each line, so that the user can see when a given stage of the macro finishes working.
[Code].....
And then, in various portions of the code, after certain jobs are finished, I simply add:
[Code] .....
And it all works fine, only the problem is the time stamp is not updated... So say I run the macro at 10:00 - the time stamp on each line shows (date) 10:00...