How do I create a code that will concatenate the number in Column B, C and D into Column E for each row within each worksheet of the file, excluding the "Update" worksheet. If there is no number is each column of the row, then do not produce a record for that row in column E. Start executing function on row 2.
eg E2=b2&c2&d2=047, E3=b3&c3&d3=964, E4 cell is empty, because there is no record in b4, c4 and d4
I have dates values in 3 columns.
A1 - Header - "Holidays in XXXX'
B1 - Header - "Holidays in YYYY'
C1 - Header - "Leaves by YOU"
A2:B11 have static dates consisting of 10 dates in each column.
C2:C11 - the user may enter any date at any point of time.
I would like to auto-merge the dates in all the 3 columns (A2:C11) in a single column say D2:D31 and then the system should auto-sort the column based on dates in any one order. So as soon as the user enters a value in say cell C2, all the 10+10+1 dates should get sorted.
Also the constraint here is a user may not apply all 10 leaves at in a year. So many of the cells may have blank values.
I had wanted to go through my spreadsheet and concatenate two columns (A & B)into one (A) then delete the duplicate column (B), but have found no way to do that. Now I am trying to search then insert a column prior to the other two, concatenate the data into the new column then delete the columns. I am specifically having a problem with my Range statement and can't figure out how to activate it or discern it after using the Find command.
Sub GroupGender()
Cells.Find(What:="Group", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious, MatchCase:=False _
, SearchFormat:=False).Activate
Selection.EntireColumn.Insert Shift:=xlToRight
With Range("a1", Cells(Rows.Count, 1).End(xlUp))
.Offset(0, 0) = "=RC[1] & "" "" & RC[2]"
.Offset(0, 2) = .Offset(4, 2).Value
End With
Cells.Select
Selection.Replace What:="Group Sex", Replacement:="Grp/Sx", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
Range("A1").Select.......................
I have the following code:
[Code] ....
When I run the macro, some columns are already hidden. The macro doesn't seem to autosize cells correctly. For instance, one cell in a row appears to have some contents hidden (or below the reading area of the cell). In other instances, the rows are auto-size to huge heights and widths.
I have the below set of data for example,
aaabbbcccdddeeeaaabbbaaabbbcccaaa
I need the output as,
aaabbbcccdddeeeaaabbbaaabbbcccaaa
As we know, a simple concatenate will work. But my columns are not limited and not easily countable. In my real scenario for some of the rows, data exist from column "A" till column "IB". So, I need to first identify the column data exist in each row and then to implement the concatenate function.
I'm trying to take the contents of 3 columns- A, B & C and have them form what I can use for a search string in column
D that I can use in a database I have.
Column A is first name
Column B is last name
Column C is Company Name
This is what i'm trying to get it to look like in column d:
("First Name Last Name" OR "FirstName.LastName") AND @companyname.com
writing a macro with following requirement
i need to display the third column with the concatinate values of column 1 and column 2
if A1 = Hi
B1 = All
then C1 should be Hi All
Item No amountinvoice no
2050377 14,870 105
5000085 120 1102
5000085 15,000 90197361
5000139 16,000 12346
5000237 31,000 56789
2050377 20,000 10111213
2050377 ($20,000)105
I have a spreadsheet with 3 columns. when I'm reimbursed money (see 2050377 for ($20,000) i'm trying to use VLOOKUP to search the spreadsheet and find out the invoice that relates to that reimbursement. but as you can see VLOOKUP finds the first incidence of 2050377 and gives me inv no 105 when it should be 10111213. my formula in C8 is =VLOOKUP (A8,$A$1:$C$8,3) but I need for the VLOOKUP to look at the item number as well as the amount. i've been told that I need to utilise concatenate, but I don't know how to do this.
In Excel 2007 I want to concatenate two columns of text. In Column A all the cells contain a single statement that I want to prefix the statements in the cells of column B (the statements in column B differ from cell to cell) I have used the formula =A1&" "&B1 and this is fine for that row, when I use the fill handle and pull it down the page the formula changes accordingly i.e.=A2&" "&B2, =A3&" "&B3 etc. But when I make the text appear using control+ I only get the concatenation of the first row repeated all the way down, irrespective of the contents of other cells in Column B.
View 14 Replies View RelatedI have a series of data in 2 columns...say A and B...that I want to concatinate into a string of data...i.e A1&A2&B1&B2&C1&C2 etc etc....
Can I include this in a macro so that it will continue to concatinate the data until it gets to the end of the list (i.e a blank cell) ?
I need a simple macro to take a list of words in 1 column, and concatenate them with each word from another column
So if Column A had "bird"
and Column B had
food
feeder
house
the output would be
bird food
bird feeder
bird house
I will have many many more words than just "bird" though.
I've searched quite a few times for Concatenating Multiple Columns and ones for Concatenating with Spaces.
I've found solutions that say use
=concatenate(A1, " ", B1)
or the VBA equivalent
I have at least 15-20 columns which I wish to concatenate.
Is there an easier way than to type for all 15 columns?
=concatenate(A1," ", B1," ", C1,....)
Also, the number of columns of each row vary
Is there an easy way to concatenate two columns and provide every possible combination?
E.g.,
A B
1 A1 B1
2 A2 B2
3 A3
The function should result in
C
1 A1B1
2 A1B2
3 A2B1
4 A2B2
5 A3B1
6 A3B2
I have a worksheet with 10000 plus entries in ten columns From K to T. I wish to have a macro with Concatenate function to merge certain Columns from these ten columns, in one column with help of input boxes which may ask inputs, about range (from and to ), and number of digits to concatenate in the required column. I use Excel 2003 XP in work but an example is 2007 attached.
View 5 Replies View RelatedI have a list of names with blank cells in Column A cell 2.
I want the programme to scroll through this column until it finds a name, when it does I want it to look in cell offset(1, 1), in this case B3 to see if there is a number. I want this number to be moved to offset (0, 1) AND any subsequent numbers below it until the next blank cell in that column (B).
In the attached image cell B2 will contain all numbers in cells B3:B9 with a / between them. Cell B10 will have number from B11 and B12 will have B13:B15. If there is no number it will just continue to the next name in column A. My rough code below delivered the first number only in the relevant cell and I'm not clever enough to get it right. It does not have to be super slick as it's for one time use.
I need numbers in column B cleared as they are concatenated into the single cell.
Spreadsheet.jpg
I am creating an excel file for a mail merge following this process. I need to take the three columns below and enter the path to the corresponding chart. I have all the charts created in a directory. The naming convention for all of the files is XX-XX-XX.gif. The X's represent the numbers below without the decimal places. Therefore the example below would be 44-43-27.gif. Is there anyway to create a formula to drag down instead of entering the filename's manually? In the end, I want to have the full file path as shown in the XLS.
q_3_abc q_3_teamq_3_yscore
4.4 4.3 2.7
I have 700+ rows to do this for, therefore I want a formula or VBA solution instead of the manual donkey work.
I have a marco that works perfects to Concatenate (join) all of the cells in Column A. However, I want to seperately join all of the cells in each column. So I wanted to the Concatenate of Column B to go in B1, Column C to go in C1, etc (or until there is no data in a column). I think there is a way to change this into a loop, but I don't know how. Below is the macro I have now.
Sub ConcatenateAll()
Dim x As String, rng As Range, cel As Range
With ActiveSheet
Set rng = .Range("A2:A300")
For Each cel In rng
x = x & cel.Value
Next
.Range("A1").Value = x
End With
End Sub
Say in L4 on form test i want to look for the value of A4 in Drill data range a2 to z1000 and retun a concatenated string of something like "sav 407 : 08-may to 11-may"
View 3 Replies View RelatedI think I just need a basic Nested For Loop code. I have a list of in column A, from A1:A537 and another list in column B, for B1:B50. I want to add a column that concatenates, each item in Column A to B1 (so 537 rows), then again each item in Column A to B2, another 537 rows, etc.. this loop is repeated 50 times, one for each name in column B.
View 3 Replies View RelatedI have the following situation and I'm trying to do this using a PC with Excel 2007.
I would like this:
T
N
O
O
C
O
E
I
M
I
T
[Code] ........
To look like this:
T
H
A
N
K
[Code] .........
This procedure will become part of a macro. The number of rows will vary but the number of columns will be the same (11 columns). I don't care too much about the order since I can later sort. As long as the data from all columns in now in one column.
I wish to Concatenate contents of several columns into a separate column, i tried using the following "column1 & column2 & column3 etc..." however with this the blank cells get concatenated too...What should is use so that contents get concatenated but blank cells are ignored?
View 4 Replies View RelatedI need for it do perform the same action on multiple rows/ cells of data. What adjustment to the code needs to be performed to do so?
Sub fconcat()
Range("C1").Value = Range("A1").Value & Range("B1").Value
For i = 1 To Range("A1").Characters.Count
Range("C1").Characters(i, 1).Font.Name = Range("A1").Characters(i, 1).Font.Name
Next
For i = 1 To Range("B1").Characters.Count
Range("C1").Characters(Range("A1").Characters.Count + i, 1).Font.Name = Range("B1").Characters(i, 1).Font.Name
Next
End Sub
I have a table that looks like:
7300
3
7301
2
7302
5
And I am trying to make a macro that will go concatenate the first 3 columns of all rows in worksheet 7300, the first two columns of all rows in worksheets 7301, etc, and insert them into column A of each corresponding worksheet.
I have an Excel file with 6 worksheets that I would like to put on a display that auto changes between sheets at an interval of say 20 seconds per worksheet so that I can user it was an information display for people. Is this possible?
View 7 Replies View RelatedI have a workbook that has worksheeets for every day of the month. The data in the worksheet consists of columns (employee #, name, clock in/out times, and break penalty).
What I am trying to do is create another worksheet that searches all the other worksheets for a "yes" in the "break penalty" column and then create a list of all the employees that received a break penalty for the entire month. I would like this to be able to auto populate throughout the month as data is entered and not have to use a filter every time I want to compile this list.
I have two sets of two columns which contain numbers as text with trailing spaces and I want to concatenate column A and B and concatenate column F and G, and then compare them, and sumif value in column I if they are the same - giving the answer in the same row as the matching data in column A and B.. but in column J.
I’ve seen sum product and haven’t been able to get it to work at all. I have been adding the trim() function in around the column references to see if that would work but am failing…
A = 2000 text
B = 1234 text
F = 2000 trailing spaces, text
G = 1234 trailing spaces, text
I = 10,000
Answer in column J
I want 20001234 = 20001234 = 10,000 for the whole column.
I don't want to change the original data as its externally sourced and used for other links etc.. This would save a few hours a week if i ( more correctly, you ) could get this to work.
I am needing to disable 5 worksheets from being calculated under the 'AutoCalculate' default option of excel. Currently, I set all 5 sheets' .enablecalculation property to false (see code example below), then save the workbook. This should prevent these 5 sheets from being calculated when the workbook is opened again - however these sheets are still being calculated with excels default 'Auto Calculate' setting once the workbook is reopened.
My issue:
While having 'Auto Calculate' enabled, how is a sheet disabled from being calculated upon opening?
Current method of disabling worksheet - does not work tho.
worksheets("Mysheet1").EnableCalculation = False
I have created a workbook with 31 worksheets (they represent each day of the month). I'd like to know how I can auto fill the date in cell A1 across the 31 worksheets without having to type in each day myself. I need the date format to look like this: Wednesday 7th May 2014
In other words, cell A1 in worksheet 1 needs to say Thursday 1st May 2014, cell A1 in worksheet 2 needs to say Friday 2nd May 2014, cell A1 in worksheet 3 needs to say Saturday 4th May 2014 and so on for the remainder of the worksheets for that month.
I have created a workbook with 31 worksheets (they represent each day of the month). I'd like to know how I can auto fill the date in cell A1 across the 31 worksheets without having to type in each day myself. I need the date format to look like this: Wednesday 7th May 2014
In other words, cell A1 in worksheet 1 needs to say Thursday 1st May 2014, cell A1 in worksheet 2 needs to say Friday 2nd May 2014, cell A1 in worksheet 3 needs to say Saturday 4th May 2014 and so on for the remainder of the worksheets for that month.
I wrote the following code to hide & password protect an excel sheet :
[Code] .....
How could I alter it so that it hides and protects this sheet automatically before closing the workbook ?
