Auto Fill A Referenced Table
Jun 18, 2014
I'm looking to set up a table in Excel (or possibly Access that is then referenced through Excel). But end goal would be to be able to type in an Item Number and then Excel automatically fills in the Description, weight, price and other information about that item number. That way, I don't have to type in "11108.1" and "Computer Mouse" and "$15.98". I want to only type in "11108.1" and it knows to fill in the other information. Is this possible in Excel? I've searched through many functions and haven't found it so I'm thinking it may require a combination of formulas.
View 1 Replies
ADVERTISEMENT
Jul 30, 2013
I have got the following problem. I have got a table which looks like this:
=Time!A1
=Open!A1
=max!A1
=min!A1
=Close!A1
When I mark the selected cells and scroll down using the autofill option I get this:
=Time!A1
=Open!A1
=max!A1
=min!A1
=Close!A1
=Time!A6
=Open!A6
=max!A6
=min!A6
=Close!A6
Why does it give A6? I want A2 instead of A6 because I want to create a table from A1 to A500 but without these jumps from A1 to A6.
View 5 Replies
View Related
Apr 30, 2014
Is there anyway to automatically fill the empty added cell after inserting a row without using the fill handle? For example, for a series of numbers: [URL]
2. Drag the fill handle Selected cell with fill handle across the range that you want to fill.
Or running balance: [URL]
2. Extend the running balance formula into the new rows by selecting the last cell in the balance column and then double-clicking the fill handle.
View 6 Replies
View Related
May 2, 2013
I have a excel based timesheet that looks at an external table named "Station Master" to populate columns from a vlookup. I have recently linked the Station Master to a database to populate it. From the database we may change status so that the project does not show up in the station master anymore to make sure complete projects are not getting hours charged anymore. Now if a project that was on the master goes away previous timesheets lose the correct description because it is not on the station master anymore.
My question is there anyway to make the previous data lock so the data that is in the cells won't change when the station master changes.
A little more info... the time sheets are by quarter so 12 weeks are in the same workbook as individual worksheets. All of those worksheets vlookup to a worksheet called "projects" inside the workbook. Then that worksheet references the external Station Master workbook.
View 2 Replies
View Related
Aug 22, 2014
I wrote below code, I am expecting column to be updated as 1, 2, 1, 2, 1 ,2 till last row, but it is updating as 123456...
[Code] .....
View 2 Replies
View Related
Jun 8, 2009
I need it to autofill just as if you selected range A1 and A2 and double clicked that little square on the bottom right hand side of the cell (so it stopps auto-filling at the last active cell in B)
View 5 Replies
View Related
Jul 3, 2008
I currently have this code ( which works perfect ) that was written by someone else. It performs an auto-fill in column "A".
I need to learn how to adjust this code to do it for other columns, but do not know currently.
Maybe someone could highlight of BOLD the adjustments to direct the code to the column.
Sub fill_rows_A_4()
Dim arrTmp As Variant
Dim lngRow As Long
With Worksheets("sheet1") 'adapt
arrTmp = .Range(.Cells(1, 1), .Cells(.Rows.Count, 1).End(xlUp))
For lngRow = 1 To UBound(arrTmp)
If arrTmp(lngRow, 1) = "" Then arrTmp(lngRow, 1) = arrTmp(lngRow - 1, 1)
Next
.Range(.Cells(1, 1), .Cells(UBound(arrTmp), 1)) = arrTmp
End With
End Sub
View 9 Replies
View Related
Nov 22, 2011
If you have a data in two dimensional table. and you need to fill each cell with the value returned from another table.
Example : this the my table
Company A Compay B Company C Product 1
Product 2
Product 3
Product 4
and this my data :
Products Companies Price
Product 1 Company 8 Product 1 Company A 7 Product 1 Company B 5 Product 1 Company C 6 Product 2 Company B 6 Product 2 Company C 9 Product 3 Company A 10 Product 3 Company B 8.8
View 5 Replies
View Related
Aug 29, 2007
I currently have a table with a range of headings (row & column), and the necessary data for it. On a new worksheet, I have a table with only a few of the headings, and I was wondering if there was a macro that would automaticlly match the headings of the new sheet with the other table, and fill in the ncessary dat, as on the other sheet.
View 3 Replies
View Related
Sep 11, 2007
I am fighting with this for a longer time now and can't find a solution:
is it possible in Excel to generate a number sequence (to create a list for auto fill) representing numbers like this:
000001
000006
000002
000007
000003
000008
000004
000009
000005
000010
000011
000016
000012
000017
000013
000018
000014
000019
000015
000020
and so on till 001000
View 13 Replies
View Related
Jan 16, 2009
Working with 2 worksheets in the same spreadsheet. In worksheet A cell F6 is a solution (hex2dec) these solutions are staggered consistently in column F (F6, F9, F12, F15 etc) In worksheet B cell A2 displays workshop A cell F6 details (=ATR!F6)
Worksheet B cell A3 Autofil uses (=ATR!F7) I want (=ATR!F9) Worksheet B cell A4 I want (=ATR!F12) How do I condition autofil to follow my chosen sequence ie F6,F9,F12,F15 etc...
View 3 Replies
View Related
Jan 20, 2010
when I fill the information into column B on pages 1-31 I would like it to refer to the location names from the loc-mileage sheet and fill in the suggested name as i'm typing.
I thought about doing a drop down but the list is too long and I dont want it to be set to only use the list names, only suggest names from the list.
View 9 Replies
View Related
Nov 28, 2012
very specific Auto-Fill?
FIBER 001
FIBER 001
FIBER 002
FIBER 002
FIBER 003
FIBER 003
Is it possible to auto fill this having a duplicate cell for each number? If so, HOW?
View 4 Replies
View Related
Jun 25, 2013
I want to have colums A2 to A32 filled with dates automatically on selecting month from A1 dropwown(validation list).. how can that be done
View 2 Replies
View Related
Jan 7, 2014
I need to auto fill quarters but Excel fills years instead. For example I write Q1-11 in cell A1 and when dragging down it fills with Q1-12 rather than Q2-11.
View 5 Replies
View Related
Jun 12, 2009
I have this script to auto fill down but something isn't right can someone point out what is wrong?
View 3 Replies
View Related
Sep 3, 2009
Auto fill downwards until row value change
View 3 Replies
View Related
Apr 9, 2013
I am trying to copy a selected cell but instead of just a copy past, I want to auto fill where it will increment the number.
ActiveCell.Offset(-1, 1).Select
Selection.Copy
ActiveCell.Offset(1, 0).Select
ActiveSheet.Paste
' Selection.AutoFill Destination:=Range(ActiveCell.Offset(0, 0)), Type:=xlFillDefault
' Selection.AutoFill Destination:=ActiveCell.Resize(ActiveCell.Offset(0, -1).Value, 1), Type:=xlFillDefault
Application.CutCopyMode = False
I have tried the above code but it hangs.
View 1 Replies
View Related
Mar 24, 2014
I am trying to figure out how to auto-fill a range. I am summing a range from one tab to another, like A1:A5. I want to autofill the subsequent cells to begin with the cell that follows the last of the previous range, so it would autofill as A1:A5, A6:10, A11:15, etc. how to do this?
View 3 Replies
View Related
Nov 13, 2006
I have a macro set up to automatically fill all of the cells in certain columns with the top cell's formula in that column. This is so I don't have to go through and manually "fill down" the formulas into the blank cells after I insert a row into my database. The problems is, though, that the macro sometimes takes a long a** time to run (and uses up a TON of memory...the doc. was 29,000 kb at one point!) because of the amount of rows & columns I have (approx. 5000 row & 34 columns) just one one sheet.
Anyway, is there a way to set up something in VBA to have it auto fill in the formulas in the columns I choose, after I insert a row, with the information that preceeds it?
So, for example, if I insert a row anywhere in my database, excel will know right away that I want that row filled w/ the formulas from the row above it.
View 9 Replies
View Related
Jan 24, 2008
I created a database and made one small mistake doing it. The database is infinite amount of rows down and my formula needs to be corrected as such. In the current cells: (C1:C1000) i have the formulas referencing cells $B1, but i need it to reference $B$1. In C2 I need it to reference $B$2, C3 $B$3 and so on. If I autofill, it obviously just keeps the following cells at $B$1 and i can't keep the dollar bill sign.
View 9 Replies
View Related
May 20, 2008
ColA-ColB
A1 - B1
A2 - B2
Let's say B1 has a formula- =A1
b2 has formula = =A2
I want to copy all the formula in ColB
As it goes down in Column B, it should be =A2 at 2nd row, =A3 at 3rd row, =A4 at 4th row.
Reason being I want this formula to activate when the cell in Column A is filled. If the cell in Col A is empty, The formula in Col B should be blank!
Example:
ColA-ColB
13/01- Jan
13/12- Dec
29/06- June
30/07- July
View 9 Replies
View Related
Jun 17, 2008
I need to be able to click on a box and have it fil that box with a check, X, or other fill and have that fill go away if I click on that box again. Can I do that?
View 9 Replies
View Related
Aug 14, 2008
I use this code to start at the the top of the column going down, but the way my data is setup, I need it to start at the bottom and work up.
Sub fillBlanksI()
'Declare variables
Dim FR As Long, LR As Long, i As Long, FillVal As Variant
'Stop screen flicker and speed up code
Application.ScreenUpdating = False
'Find the last row of any column in the sheet
LR = ActiveSheet.UsedRange.Rows.Count
'Loop from row i downwards until we find a value - this is the first filled row and assign its value to FillVal
View 9 Replies
View Related
Sep 14, 2009
my macro simply activates a cell and all i want it to do is to auto fill downwards!
its intended to autofill down for about 100 rows but just cant figure it out!
but keep in mind the cell is always going to change so it cant be fixed
i.e this wont work:
Selection.AutoFill Destination:=Range("C95:C659")
Range("C95:C659").Select
ActiveWindow.SmallScroll Down:=513
because i need it to be autofilled from the CURRENT active cell only!
View 9 Replies
View Related
Dec 2, 2009
i have just finished filling out a 2000 line spreadsheet, on this spread sheet i had a customer number i then had to look up the customer number on our old database to retrieve the address for the customer. Is there any way that for future spreadsheet's i can input the customer number and it will auto fill the address of that customer ?
the columns on my sheet are:
customer A/C number
Customer Name
Customer Address line 1
Customer Address line 2
Customer Address line 3
Postcode
it would save me hours and hours of time digging through the database again.
View 9 Replies
View Related
Dec 3, 2009
I have a spread sheet which tracks work we do on certain items. These items (about 200 of them) consist of a 3 or 4 number tracking code (they are all 4 numbers, but some have leading 0's.) This tracking code is entered into Column B and when we cross reference the number to a chart we have we can determine if item is either, "model A," or, "model B."
I want to get rid of that cross reference chart, or rather, I want excel to cross reference for me and automatically fill A or B into Column C, right next to the tracking code.
Is this possible without VBA? It seems like it may be something simple, but i've poked around and have done nothing but make a mess.
View 9 Replies
View Related
Mar 14, 2007
I'm trying to set up a multi page report where some of the same information is repeated into a several forms. Is there a way I can set this up to where I type it into the one section and it will auto fill into the other pages I need the same information?
View 4 Replies
View Related
May 11, 2008
I want to be able to type 'A' in cell A1, then autofill down to get:
A1: A
A2: B
A3: C
A4: D
A5: E
Etc.
Once I get to cell A26, which would be "Z", I want to continue to get:
A26: Z
A27: AA
A28: AB
A29: AC
A30: AD
how I could do this? I tried dragging cell A1 down but it just returns the result of "A" in all the rows.
View 2 Replies
View Related
Jun 12, 2013
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
View 2 Replies
View Related