Excel 2010 :: How To Auto Update PowerPoint Table When New Data Entered Into Table
Jun 12, 2013
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
The newly-typed column in Excel table is not get updated in PowerPoint table.
I have a table created in Excel 2010 by a SQL query. the query pulls 3 columns of data - Resource Name, Contract Company, Labor Category. I then add a column called "KEY". KEY is derived using VLOOKUP. VLOOKUP is matching the Contract Company from the table created with SQL to a table called "Rate Key" in another worksheet in the spreadsheet based on the matching the Contract Company. That all works fine. If the table changes due to changes in data coming from the SQL db, the column I've added using VLOOKUP recalculates correctly. Then I add 2 more columns. One is called RATE - which is a number that I manually type in. The last column is called RCode and is calculated by the RATE times the KEY. Whenever I refresh the SQL query, all of the the calculated rows work fine; however, the data in the RATE column that I manually enter does not move - it stays with the row regardless of whether or not the name changes when the new SQL data comes over. How do I get the values manually entered in the RATE column to move with the correct row when the rows change?
I have excel graphs linked to a power point presentation that runs in a loop and I would like have to the links update everytime slide 1 pops up or when the loop restarts, either one works for me. When I close the looping presentation and reopen it I get a message asking me if I want to update the charts, but I would really prefer the looping presentation to update itself. I know this is going to be a VBA setup, but I cant seem to figure it out. I pasted the links by: pasting special, paste link as microsoft office excel worksheet object.
I'm trying to auto populate a calender style sheet in Excel 2010 based on data from a Work Schedule sheet. The work schedule sheet contains a list of jobs, with each row representing a different job. There is a column for the start date (e.g. 25/04/14) and a column for the end date (e.g. 26/04/14). There are other columns which select resources such as people and vehicles. Each resource may appear on any one of several columns for each row, e.g. Site Operative 1, Site Operative 2 etc.
On the calendar sheet, in which one cell represents one day (e.g. 25/04/14), all the dates are shown along the top going right and all the resources are shown on the left going down.
On the calender sheet, in every cell I want a formula that will look at the Work Schedule sheet and see if that particular resource is being used on that particular date. If it does, the cell can display information from another cell such as the job number or job name to which the resource is assigned; if it doesn't, the resource isn't being used so it can display "Free" or "Available".
I have a chart and a data table (please see attached file named "delete_1.xls).
I need to present these 2 items in a single slide of PowerPoint.
I have done like this.
-First copied the chart from Excel. -Then pasted it in PowerPoint using "Paste special". -Then clicked "picture (windows metafile)" this is to reduce memory consumption
Then repeated the above steps for the excel table too.
The PowerPoint slide that I got cannot be attached as system doesn't allow me.
Question: I wanted to a give a paper copy of the PowerPoint slide to my Director who needs a PowerPoint slide and not an Excel chart. But in the slide, the numbers of the table look much juggled and as if the numbers are too closely typed.
I tried with various different fonts in Excel and then copy and pasted in PowerPoint but the problem persists.
What things I should do in Excel table so that cell values are clear in the Table presented in PowerPoint ?
I have a quantity - thick/dia - width - length fields used as row labels, I would like each cell to have a border, after each update I get negative results to preserve the cell border formatting. Col b,c,d,e continually lose their cell border formatting after updating the data.
PIVOT TABLE FORMAT PRESERVATION DURING UPDATE 12-30-13.xlsx
I would like make a cell in a report auto update with the most recent data entered in another cell from an input table either in the form of a formula or code to ensure that the most recent data is recorded and reported.
- a list of data - a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
If I enter the city "Dunn" it auto capitalizes it. If I type my name "mark" in there it doesn't. I don't want it to auto "do" anything. How can I turn it off? I've tried copying into a new book and that didn't work so it doesn't seem to be formula driven. The issue is happening on a coworkers machine, but I cant seem to recreate it on mine. Hers is 2007 while mine is 2010.
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest) The problem is i will get "....A file name already exist...do you want to overwrite.." prompt. Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
I'm using a total of 20 Rows and 2 Columns. Each row has Column A for Description and Column B for Score. There are total 10 subjects with 10 noneditable rows, and 10 editable rows.
I'd like to protect column A and B for rows 1 to 10 and unprotect only Column B for rows 11 to 20. When any cells from Column B, rows 11 to 20 updates, I'd like to automatically sort columns A+B for ONLY rows 1 to 10.
Therefore, rows 1 to 10 need to be sorted based on the scores on Column B, and since rows 11 to 20 are just input fields, they are never to be sorted.
Column B for Rows 1-10 will be formulas and are based on Column B values from rows 11-20.
When a value in any of the rows 11-20 of Column B is updated, Range A1:B10 will automatically sort from highest score to lowest score (Column B).
Since Column B for rows 1 to 10 contains formulas and not actual values, would it throw off the order of things when sorting formulas?
the macro coding to perform this task.
Here is just a visual of what the spreadsheet will look like
I have two spread sheets that I 'converted' into tables. I need to combine them into a single sheet. When I attempt to copy and paste from one to the other the formatting and formulas do not carry 'down' as they do when I manually enter a new line or record.
Is there a way to copy multiple rows of data from one tabled sheet to another tabled sheet?
I have an Excel table with 7 columns. I have used a formula to randomize the data in each column, and it works fine, accept that it resorts/re-randomizes the contents of the table every time data is entered anywhere in the workbook. I would like the data to be sorted/randomized only once, and then only again upon pressing F9, since I have other spreadsheet which reference the data in the table.
This is the formula I use to sort/randomize the data, and I am using Excel 2010 on a PC.
Column B = numbered 1 - 20 Column C = =RAND() Column D = last of names Column E = sorted/randomized list of names.
Can Pivot Table chart add another data from another sheet? I attached the link for this file (Add data1), it is because the file consists of several sheets and I do not know how to show here.
I would like to add the data from the "Rate" sheet into the Pivot Table chart (Chart.PT). I made an example by using normal way (Chart.Case (9)), the column series in the chart is the one I added from the "Rate" sheet. I wonder if I could do the same in pivot table chart.
I got a table, some columns are variable data you have to put in by your own and I got some columns with only formulas. After entered the last variable data I want excel to add a new row with the same formulas and format as the other rows in the table.
I have got a table, with a range B1:CC200. I have been able to run a macro which pops up a form and shows the particulars of a selected month corresponding to those in the table. (e.g., say entries in column D pertaining to say, March 2012 are shown in the form). Problem is I want to be able to update the entries using the form, but no no success. Am quite new to vba but the code I tried to use on the command button after updating is shown below
Private Sub CommandButton1_Click() TextBox1.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B2:CC2")) TextBox2.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B3:CC3")) . . . TextBox20.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B20:CC20")) Unload Me End Sub
Where A1 is the month in question, B1:CC200 the range of the database and row B2:CC2, and B3:CC3...., B20:CC20the data I need to update. .
I have searched and found many examples of code that will lock cells once data has been entered. But for some reason, I cannot get it to work in my workbook. The weird thing is, I have successfully got them to work on blank workbooks. I unlock a range I want people to be able to edit, I protect the workbook, I enter the code, and it works. But I do the same thing on my workbook, nothing locks.
I've tried locking all the cells on a sheet, and only unlocking a small range, as in the examples (A1:A10), and I cant get it to work. I've tried not pre-protecting the sheet, I've tried 4 or 5 different examples of code. If it wasn't for the fact I've gotten it to work on blank workbooks, I'd think VBA was disabled or something. I can't post a copy of my workbook for you all to look at because its on a stand-alone computer at work (and the USB is disabled for info-sec).
Cell A10 is set up to autocomplete based on the cells above it. Cells B10 and C10 are set up to use VLOOKUP to gather information from the table above based on the name in A10. What I would like is for C10 to autopopulate with the information in the table which corresponds to the name entered in A10, which it already does. What I would like to do after that is be able to change the data displayed in C10, and have it update in the cell in column C which corresponds to the name entered in A10. What I'm trying to do is create a customer manager. The customer's names will be hidden, as well as all their information, but I want my sales guys to be able to pull up an individual customer's information, then enter notes on that customer (column C). Vlookup won't allow you to enter information, as changing information erases the vlookup formula in the cell. This is very difficult to explain without direct visuals. Is there any way to do this?
I am using Excel 2007 and my version of visual basic is 6.5.
I am baffled by the behavior of this code to manipulate one of my pivot tables. I am trying to set all but one of the pivot items in one of the pivot fields to not visible. Because there is a large number of items, I wish to suspend all automatic updates until all items are properly set to visible or non visible.
------------------------------------------------------ Sub SwitchBoards() Dim BoardNew As String Sheets("Board Parameters").Select ' Make sure we get the right value.
The MsgBox returns with: "Manual update is set to False" right after the instruction to set it to True!!
I have a spreadsheet with 3 tables (all side-by-side). Table one has 8 rows of data; table two has 2 rows of data; table three has 3 rows of data. I am looking for assistance on how to sort each table in desceding order (by sales). Basically I want to do a sort everytime there is a change of values in any of the tables. I have attached a sample spreadsheet to clarify the table layout and the manner in which the values change within each table.
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest() Dim n Dim V Range("A1").Select V = ActiveCell.Value
I have a pivot table I am try to update. The table references another tab where my data sheet exists. If I add data to the datasheet how can I get my pivot table to recognize the additional information.