I have a macro that auto opens does a couple of open and saves but then the Application.Close doesn't want to close the blank Excel screen. Can't you use Application Close in a Auto_Open macro?
Sub Auto_Open()
'
' Auto_Open Macro
' Macro recorded 1/27/2006 by Rich
'
' Keyboard Shortcut: Ctrl+c
'
Application.DisplayAlerts = False
When a user X's (clicks of the X in the titlebar) of a user form, I want to save whatever input has been made to that point and close the application. this is what I tried but it neither saved input nor closed the application
View 2 Replies View RelatedLooking for code that will verify if Excel is running and if so, then close Excel, including all hidden versions.
Any way to auto-close the excel application after finishing my macro run?
I tried this code,but it doesn't work... i added a sub and ran it like this:
Sub CloseandSave()
ActiveWorkbook.Close SaveChanges:=True
End Sub
to be more specific,there is a macro running,closes all open workbooks,but excel itself stays open...
I didn't receive a response to a previous post where I was trying to use a batch file to close and open a workbook at a scheduled time everyday. I was thinking about this problem over the weekend, and thought that it would probably be easier to just use a macro to close the file at a certain time everyday (if it is open) and then use a batch file to open the file a couple of minutes later.
I'm having problems with what I thought should be pretty simple though. I tried this to close the file at 5:15pm
Is there a code I can use, through a private command button, that will exit the Excel program (not just the current workbook) without asking to save?
View 3 Replies View RelatedApplication starts with a button on an otherwise empty spreadsheet. Then opens a user form. After I close using a button on the form. My close routine closes the worksheets and workbooks. I then quit the application and I get a message asking if I want save the original spreadsheet.
View 6 Replies View RelatedI am using the code below to open a workbook, run a specific macro, and then close.
everything works except the original book wont close.
Sub Auto_Open()
Application.DisplayAlerts = False
Workbooks.Open Filename:= _
"R:DocsReportsDashboardsTest.xls"
Run ("'Test.xls'!Module1.Test")
ActiveWindow.Close
Application.Quit
End Sub
We have a custom sort routine activated by a double click
Sub Auto_Open()
On Error Resume Next
Application.OnDoubleClick = "AutoSort"
End Sub
It used to sit in a module in each workbook, but I modified it to work from personal.xls. When I moved it to a .xla addin file it stopped, so I'm figuring that opening a .xls doesn't trigger the auto_open event.
i recorded an auto_open macro in excel that is supposed to import data from an acess table into a specific worksheet. However when i start that excell document the data is imported into whatever worksheet is open instead of the worksheet that it is supposed to...
Or more importantly, what did i do wrong?
(to record the macro i started on the worksheet i want the data imported to, started to record the macro and went to data:import external data: import data. I select the acess database/table in mention. When it asks where i want to put the data i've tried clicking on A1 on the worksheet i want it to import on, and i've tryed typing "worksheetname"!A1.
It works the first time i try to import data...but if i close it out, and reopen it, it just imports to any old worksheet.
I have an auto_open module that runs a couple of other small sub routines, the query I have is it possible to hide the active window from a sub?
Because it does not seem to work for me, I can step through (F8) but when I open the workbook it just flikers but does not hide it's self.
I want to hide the work book as there is nothing that the users need to see, it just has VBA code to prcess data. There is a menu item created on the command bar so the user can run the code.
I have a pasword on the VBA code would this cause issues?
Sub Auto_Open()
my_auto_open
Add_Workbook_Menu_And_Items
End Sub
Sub my_auto_open()
Dim w As Window
For Each w In Workbooks("Star_Plus_Hindi_MKII.xls").Windows
w.Visible = False
Next
End Sub
When I open my workbook I get a popup that says: Welcome Back...
Using a module with the following
Sub auto_open()
MsgBox "Welcome Back..."
End Sub
I want to have it say: Welcome Back, Phixtit
Where "Phixtit" comes from the cell "C15" on my "INFO" sheet.
Example:
='INFO'!$C$15
I have a formula that I can't get to paste successfully in the forum - it keeps getting cut off?!? ... but I think I can probably simplify my explanation to get the answer I want anyway.
I need to only show the value from AUS!$H$2:$H$17 if the C2 & D2 combination are the same as the AUS!$B$2:AUS!$B$17 & $AUS!$C$2:AUS!$C$17 combination.
Im copying and pasting data from one workbook to another but when I want to close the source workbook, it comes up with this message that I have much data and if I want to keep this in a clipboard. I thought I could disable this with Application.DisplayAlerts = False but when I do this, Excel freezes. Im I doing something wrong. How can I supress this window?
Public path As String
Sub Get_data()
path = "\Nlchoosa.nlOPS_Processes$OPS_ProcessesReports Sector performance"
Workbooks.Open Filename:=path & "ReportsSector Performance Reporting week.xls"
Range("A1").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Selection.copy
Windows("Sector Performance report Week.xls").Activate
ActiveSheet.Paste
Application.DisplayClipboardWindow = False
Windows("Sector Performance Reporting week.xls").Activate
Application.DisplayAlerts = False
End Sub
I am using Excel 2003.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
I need to know the command to close a workbook. I have used the information found here: http://www.ozgrid.com/VBA/userform-close.htm to disable closing the workbook via the upper right "X", but I need a button that, when clicked, simply closes the workbook instead.
View 2 Replies View RelatedI have 2 cells with numbers. In a 3rd cell I want to create a formula which looks at the 2 data cells and shows a value. The rules are the following: If C1 or C2 are bigger than Xthen C3=value1 else C3=value2. I have some basic excel knowledge but im not very familiar with functions. I'm using Excel 2007.
View 4 Replies View RelatedI need to consolidate several amount and make sure which of them falls into a sum of an amount.
I wonder if excel can find all the calculation in range A, and highlight those that equal to the cell D10 (example as per my attachment).
Calculation.xlsx
how to create a list (I know how to calulate the count) of combinations without repetition when choosing 2,3,4 and 5 words from a set of 5 in Excel 2007.
e.g. Alpha,Bravo,Charlie,Delta,End
(AlphaBravo=BravoAlpha)
Choosing 2 = 10
Choosing 3 = 10
Choosing 4 = 5
Choosing 5 = 1
I have data in a 5x5 area and I would like a VB Script or Function that can give every possible combination of one number from each column added together.
i.e.
500 400 300 200 100 1500
400 300 200 100 500 1900
300 200 100 500 400 1800
200 100 500 400 300 etc...
100 500 400 300 200
I have a list of numbers from 1-7 would look like this each number in a seperate cell.
3 5
1 2 3 5 6 7
2 4 5 6 7
6 7
4 6
6
I want to use one number from each row (which there is only 6 rows) and then find every number from 1-7 that will complete the sequence 1-7. So with the numbers above (using one number from each row) the only other numbers that could be used would be 3 or 5.
The combos that would work:
row 1 use 3 ----------- row 1 use 5
row 2 use 1 ----------- row 2 use 1
row 3 use 2 ----------- row 3 use 2
row 4 use 7 ----------- row 4 use 7
row 5 use 4 ----------- row 5 use 4
row 6 use 6 ---------- row 6 use 6
5 would complete ---------- 3 would complete
Remember the numbers and how many numbers in each row can change but will always be 1-7 and I always need to find every number that can complete the sequence 1-7 by using one number from each row.
on combination of numbers
on the extreme left column, i have 23 numbers from A1:A23. All 23 numbers are in the form of 4 digit. For example A1 there is 1234, i need to display the possible 3 digit combination of this in the same row (like say 123,124,234,134 in B1,C1,D1 AND E1).
Another example in A2 there is 3545, i need to display 354,455,355 in the same row in B2,C2,D2
I need to perform this operation for the 23 numbers on the extreme left row. Can give me some hint on the code.
I am trying to show the all possible combinations of a set of numbers in Excel, in my case I think permutations are more appropriate to use. For example: there are three numbers 1, 2, 3 I want to show results like:
1, 2, 3
1, 3, 2
2, 1, 3
2, 3, 1
3, 2, 1
3, 1, 2
The functions in Excel available only give the total number, but I want to see these combinations!
I was just wondering if it was possible to only allow cells in a worksheet to only allow values that are a combination of 2 arrays whether it be through data validation or other means. For example, if I have an array that has a b and c and a second one with 1 2 and 3, is it possible to only allow values a1 a2 a3 b1 b2 b3 c1 c2 c3?
View 2 Replies View RelatedI have set of people where by based on Level & designation want to find the percentile on their CTC.
Attached is the sample file. Percentile.xlsx
Can Offset be combined in an Index Match Match formula as per the attached sample?
View 4 Replies View RelatedI'm trying to use a combination of Hlookup and COUNTIF. I'm selecting a date value in a cell using data validation. I'm then wanting to write a formula to lookup that value in a row of dates, and then use a countif to find all the '1' values in that column.
View 6 Replies View RelatedIve attached my example but explaination of what i am trying to do is below:
In sheet 1 i have products listed with a product ref
In sheet 2 i have a list of features by product ref.
I want to be able to put each feature next to the relevant product in sheet 1, some products may have 3 features, others may have 5 or more.
I need combining sumif & sumproduct. I have attached a file which explains what I need.
View 2 Replies View RelatedI would like to check a combination of two cells, if these two cells are both empty (not zero, just blank) then it will return a blank in another cell. I tried using AND but am unsure how it works. I would like to use a "Case" Function.
Function FirstCheck(Count1, Count2)
Select Case FirstCheck
Case Count1 = "", Count2 = ""
FirstCheck = ""
Case Else
FirstCheck = Abs((Count1 - Count2) / (Count1 + Count2))
End Select
End Function