When I open my workbook I get a popup that says: Welcome Back...
Using a module with the following
Sub auto_open()
MsgBox "Welcome Back..."
End Sub
I want to have it say: Welcome Back, Phixtit
Where "Phixtit" comes from the cell "C15" on my "INFO" sheet.
Example:
='INFO'!$C$15
i recorded an auto_open macro in excel that is supposed to import data from an acess table into a specific worksheet. However when i start that excell document the data is imported into whatever worksheet is open instead of the worksheet that it is supposed to...
Or more importantly, what did i do wrong?
(to record the macro i started on the worksheet i want the data imported to, started to record the macro and went to data:import external data: import data. I select the acess database/table in mention. When it asks where i want to put the data i've tried clicking on A1 on the worksheet i want it to import on, and i've tryed typing "worksheetname"!A1.
It works the first time i try to import data...but if i close it out, and reopen it, it just imports to any old worksheet.
I need a macro thaw sends a mail to a specific address (and CC) based on a critiria in a cell. This is the code I have. It does not send the mail.
[Code] .....
I have a table like this:
1/2/14
2345
1/6/14
34665
1/7/14
5473457
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData()
For Each cell In Range("A1:A1") ' Where to look for the date
If cell.Value = "AIM Land Services Ltd." Then ' The date
Range("A5:O350").Select ' What is the range to copy
Selection.Copy ' Copy it
Sheets("Invoice_Log").Select ' Select the Sheet it applies to
Range("A5").Select ' Where to paste the data
[Code] .........
I am using the code below to open a workbook, run a specific macro, and then close.
everything works except the original book wont close.
Sub Auto_Open()
Application.DisplayAlerts = False
Workbooks.Open Filename:= _
"R:DocsReportsDashboardsTest.xls"
Run ("'Test.xls'!Module1.Test")
ActiveWindow.Close
Application.Quit
End Sub
We have a custom sort routine activated by a double click
Sub Auto_Open()
On Error Resume Next
Application.OnDoubleClick = "AutoSort"
End Sub
It used to sit in a module in each workbook, but I modified it to work from personal.xls. When I moved it to a .xla addin file it stopped, so I'm figuring that opening a .xls doesn't trigger the auto_open event.
I have an auto_open module that runs a couple of other small sub routines, the query I have is it possible to hide the active window from a sub?
Because it does not seem to work for me, I can step through (F8) but when I open the workbook it just flikers but does not hide it's self.
I want to hide the work book as there is nothing that the users need to see, it just has VBA code to prcess data. There is a menu item created on the command bar so the user can run the code.
I have a pasword on the VBA code would this cause issues?
Sub Auto_Open()
my_auto_open
Add_Workbook_Menu_And_Items
End Sub
Sub my_auto_open()
Dim w As Window
For Each w In Workbooks("Star_Plus_Hindi_MKII.xls").Windows
w.Visible = False
Next
End Sub
Is there a quick Macro I could use to rearrange text in a cell. For example our organisation list all the departments in an unconsistant way and it makes finding the departments hard using A-Z. For example some department will say "Department of ...", "Dept of ...", Division of ..." or "Div of ...". (Obviously excluding the quotes).
What I wanted to know is this. If you highlight the range you wish to work with, could you use a message box to ask you what text you wish to edit and then automatically search the range and make the changes.
For example search for "Dept of " (note I would need to keep the space after of otherwise I would have leading spaces) so that "Dept of ABC" becomes: "ABC, Dept of" and say "Division of XYZ" becomes "XYZ, Division of"
I have a macro that auto opens does a couple of open and saves but then the Application.Close doesn't want to close the blank Excel screen. Can't you use Application Close in a Auto_Open macro?
Sub Auto_Open()
'
' Auto_Open Macro
' Macro recorded 1/27/2006 by Rich
'
' Keyboard Shortcut: Ctrl+c
'
Application.DisplayAlerts = False
I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.
View 4 Replies View RelatedI would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies View RelatedI have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
I need to make a macro to get sales information from sheet one to sheet 2 in a different order with a few other things that need to be added in everything I need is in sheet 2.
Sheet 1 is what I work with and I need it to look like sheet 2 using a macro I wrote what I need in sheet 2A13-...
I'd like to build two macros that are slightly different but are both along the same lines.. The first one will take only certain columns of information from the "Master" sheet and dump them into the "Public" sheet. (I want only certain information to be seen by others). I.E. say I only want columns A, H, K, L from the master sheet to go in A, B, C, D in the Public sheet. I hope thats enough detail.
The other macro I want to build will take the A, B, C, D information from the Public worksheet and dump it all into another workbook called "Client Lists". The link to these two documents would be over a network so there shouldn't be any issue there... This way, all the people I work with can have this document and have up-to-date information on clients etc.ed...
There is a webcreated excel document that generates dates as the date of such as:
4/1/09 12:39:00 PM
I want to write a macro that will remove the date part and just leave the time. How would I write that? Times are in columns C and D and I want it to scan all the way down to row 600 and replace.
If cell K6= "ERROR" I need a message to pop up on screen with the message "Wrong Entry click OKAY to find, Click CANCEL to ignore". Clicking OKAY would simply go to worksheet named "MONITOR". Clicking Cancel would just clear the pop up from on screen.
View 5 Replies View Relatedmy macro is set up to do the following in my book once the user inputs a row of information. the user will go to the opproperate sheet based customer and input all info.
the macro is run (ctrl+z)
the macro takes the last row in the active sheet, and pastes it into the last row of the "ALL" sheet. then it goes and sorts the sheet in order.
i want to adjust it so that the user will input the row of information into the last row of in the "ALL" sheet. then based on the given informaiton, paste the same row in both the corresponding customer and location sheets.
im assuming im going to need to use some variables?
attached is the test spreadsheet.
I need a macro to clear data on 2 worksheets that i can add to a button. lets say sheet1 B55:Y55 and sheet2 b102:y102
View 3 Replies View RelatedI have a template work book that has several worksheets with numerous formulas thorughout.
For example;
=SUMPRODUCT(--ISNUMBER(SEARCH("MCSH",P9:P218)),--ISNUMBER(SEARCH("HWD",G9:G218))).
When I set up another template for a different crew I manually have to go through the entire work book and change the crew identifier (MCSH) in every formula.
I am looking for a formula or Macro if its the only way which does the following:
I have a set of locations in the below table which also has exactly the same name as a tab in the same workbook. So for example I have 1 tab called "summary" which contains the below table and than another tab called "London453" & another tab called "New York45" & another tab called "Paris3232" & last tab called "Vancouver43"
In the "Reconcilation needed" column I would like a forumula/macro to start in Cell B2 and look at the cell next to it in Location column [Cell A2] and then go to the corresponding tab in the workbook and if there is a value in cell G22 in that tab, than I would like the formula/macro to take the first 7 charactors of Location value otherwise put nothing.
Example :
in tab "London453" there was a value in cell G22 --> hence 7 charactors "London4" in below table
No value in Cell G22 in the "New York45" tab --> hence nothing in below table
Value in "Paris3232" tab in cell G22 -> hence "Paris32"
No value in "Vancouver43" tab -> hence nothing
Location
Reconcilation needed?
London453[CellA2]
London4 [Cell B2]
New York45
Paris3232
Paris32
Vancouver43
I have a userform which is designed to get and enter data into one worksheet.
When I call the userform up from a different worksheet it doesnt refer back to the data source worksheet?? How can I do this?
I have used
sheets("dataworksheet").activate
in the user form initialise event but this still doesnt work.
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedI have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows:
*CUSTOMER
*CONTACT
*MACHINE TYPE
*SERIAL NUMBER
*QUOTE NUMBER
*ORDER NUMBER
What the Macro has to do is this.
It takes an specific word from a certain number of files that you can choose from an add file window.
Then when you choose those files the macro starts to run every file and look for an specific word, in this case is "ROFO March 2013".
When it finds it, The macro creates a new workbook( You create the name of that workbook y the first place of the macro, when you choose the files that you want to look for that word).
So, When the macro finds the word ROFO March 2013, it copys all the columns that has that name, and keeps looking until the file ends.
And paste all that info in the new file, A consolidate File.
I have change all the names of variables of the macro so you can understand it.
Code:
Sub copy_data(ByVal Origin_File_route As String, ByVal destiny file As String)
Dim Origin_File As String, RsBusq As Range, ROFO As String
Dim Rango As Range, Fila As Long, lastrow as Long
origin_file = Dir(origin_file_route)
[Code] .......
I am comfortable with getting a macro to copy & paste where I need it to, however how to get the macro to recognise when a certain value has stopped.
For example in Column B on "DataDrop" are all the divisions that exist in my company i.e East Anglia, Essex, London etc. There is an empty row between each division.
At job, Mac OSX and Address Book 4.0.6 with contact info including in many cases emails. I'd like to get it of there, into Excel to manipulate, and ultimately into a FileWrecker Pro database. How to export 1087 entries from Address Book including only selective data fields is the question, and I know that's "slightly" OT, but I do want to import into Excel, so I hope that vindicates me! If not, and you can point me to a good MacForum, I'll settle.
View 9 Replies View RelatedI have a small data set (ends up with 8 columns, up to 1000 rows), that gets imported sorted and formated via a macro linked to a button. I need to be able to look at one particular column of info, which will contain different text values every time the data is updated, and create a list of all the different values that occur in that column (maybe 10 max). Then...... I need to calculate a numerical value from adjascent column, linked to the text values from the first process. Below is an example to better explain:............
View 2 Replies View RelatedHad 2003 now 2013. Trying to get the macro to select different printers for different doccuments. 2013 macro recorder does not record any printer info or path, all printers show the same wording just application print...
How can I get the recorder to acurrately record and diferentiate printers?
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....