Below is my current code. I created this to work for a spreadsheet I had. Works mint. Then I use in another spreadsheet which is almost identical but has less rows. Everything works, but then im left with a bunch of extra rows that have DIV error. Rather than select range 2:34, is there a way to select the entire column, and autofill only if the column next to it has a number in it?
View 6 RepliesI have got 5 columns. What i intend to do is to loop to the last data cell in column d,e and autofill it down from there till the last row in column a,b,c. What my code does now is to autofill the entire column c,d from the 1st cell and not from the last data entry cell.
Dim r As Range
Dim lRow As Long
lRow = WorksheetFunction.Max(Range("A65536").End(xlUp).Row, _
Range("B65536").End(xlUp).Row, Range("C65536").End(xlUp).Row)
Set r = Range("d1:e1")
r.AutoFill Range("D1:E" & lRow)
I had searched and tried dozens of variations but just can't get it right.
I want to write some VBA code that simulates the double click of the square in the lower right of a selected cell. When you double click it, it fills every cell in column A until the first blank in column B. I was able to find this code searching around:
Code:
Selection.AutoFill Destination:=Range("A10:A" & Range("B10" & Rows.Count).End(xlUp).Row)
Selection.Copy
The issue with the above is that it copies the data all the way down to the LAST row in column B with data.
I want to have the macro stop when it finds the FIRST blank cell in column B.
Just as an example, the last row of data in column B is 100, but in row 67 the cell is blank, so I want it to stop at row 66.
I have a VBA macro that deletes duplicates rows, however I would like to retain the information from the duplicate row, just before deleting it. For instance, If I have these two columns: ....
View 9 Replies View RelatedI would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies View RelatedI have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I am trying to simplify my data entry and I have this idea that I do not know how to tackle, but it would be nice to have it worked out.
I am looking for an autofill macro that will fill column B2 to Bxx with values from 1 to max value specified in cell B1. Lets say I know I have 5 trees I need to enter. I want to enter "5" in a cell as a reference, and everything else will be filled in automatically with press of the button.
To make things even more productive I would like to use value from cell A2 and replicate it through the range specified above in column A2:Axx.
Result: ....
I have this ActiveCell.Offset(0, -1).Range("A1").Select. Selection.AutoFill Destination:=ActiveCell.Range("A1:A6"). However I need to copy the value down, so it is identical to the Range("A1"). At the moment it adds one year to each value when copied down. e.g. A1 = 12.01.09. and it copies it down so I get 12.01.10, 12.01.11 etc... I want them all to be 12.01.09
View 3 Replies View RelatedI am looking for a way for my macro to select cells C4:T4 and then auto fill the formulas down to the last row with data. I have found suggestions when working with one cell to auto fill, but cant seem to find a way to do it with a range of cells
View 2 Replies View RelatedI have a Macro and I need to code it to Autofill a formula in column B with data from A and I need to set it to AutoFill to the last row. Probably basic but I've tried a couple posts previously and I am just not getting it. This is what I currently have. Sorry, I recorded it and have some additional steps in here I don't need.
View 6 Replies View RelatedI have a piece of code that includes the following line:
Selection.AutoFill Destination:=Range("B1:B9414")
I want it to always autofill to the last row that has content in it. I have been changing the value to a large number that I know is always more than the content of the worksheet which changes periodically, but I would rather it always only go to the last row that is not empty so I don't have to go back and delete those extra rows.
I have a spreadsheet with data where the number of rows change daily, in column D.
I have formula in column E which I autofill manually by double clicking on the cross thingy of the first cell.
However I'm trying to do it using VBA, but it always stops at a certain row and not where the column D data stops.
Below is the macro which stops autofilling at row E7762
Selection.AutoFill Destination:=Range("E3:E7762")
Is there a way to amend the VBA to autofill based where Column D data stops?
I have a piece of code that includes the following line:
Selection.AutoFill Destination:=Range("B1:B9414")
I want it to always autofill to the last row that has content in it. I have been changing the value to a large number that I know is always more than the content of the worksheet which changes periodically, but I would rather it always only go to the last row that is not empty so I don't have to go back and delete those extra rows.
I need to write a code that will autofill down column A until the next value is reached and will continue to fill down using the new value. This will continue until the last row in column B. I have attached a small sample file for clarification.
View 3 Replies View RelatedI have a macro that copies 3 cells and a range of cells from various sheets to a new sheet (See attached). I would like the rows in the first 3 columns to populate with the same values as in the first row. I only need to copy as far down as the last row that has been copied over. Problem is amount of data copied over each time will vary, and so will the start point on the spreadsheet as more data is copied across.
View 9 Replies View RelatedI have data in range A2:A20 (column) and I like to see all range data also in row B1:U1. Like B1 cell "=A2" in C1 cell "=A3",... (I like to set some kind of matrix with the same data in first raw and first column.) Is there any autofill solution to this problem. Copy and paste is not usefull, because range A2:A20 is editable and I need direct link to range B1:U1. Probabely in future I will need to set range like A1:A700 and autofill will be common solution to this setup.
View 2 Replies View RelatedI fill out this form everyday and sometimes need to type "S" and every time it fills in "Sampling Rate #1" because that's what it says in the same column higher up. Is it possible to turn this off somehow?
View 3 Replies View RelatedI want to change the following code so that it fills a row instead of a column
[Code] ......
This fills column "A" top down but I now would like to fill row "1" left to right.
I have code to fill down to the last row with data for 1 column Can I adapt the code to fill down more than 1 column. current code for 1 column
View 2 Replies View RelatedI am working on automating our truck payment system. When the macro copies the data over to the output printout sheet, it will only copy the information once, even though there are 15 lines that it should be copied to. When I originally recorded the macro, I used the auto fill option to fill the information for all 15 lines. However, when I run the macro the auto fill doesn't work for me.
View 8 Replies View Relatedthe code as shown below so that in column A of worksheet: Data to Text I need an AutoFill from cell A1 to the last row. The value in cell A1 needs to be: 1
If there are more than 1 records then I need an AutoFill from cell A1 to the last row. However, the value in cell A1 needs to be 1, value in cell A2 needs to be 2, value in cell A3 needs to be 3 etc...
I have the following formula that I would like to be able to autofill.
=UniqueItem('Divide Outs'!$A$2:$A$999,1)
The 1 after the comma needs to count up...anyway to autofill a formula like this?
This is a function that i use to display unique listings.
I was wondering if it was possible to have some cells where when I start to type it suggests me from a list from another sheet?
View 1 Replies View RelatedI have multiple worksheets each with varying amounts of data. I have a number in cell A1 that I need to autofill down to the bottom of each worksheet. All of which have varying amounts of data.
RA-0151
0
765804
3308345
168
0
5.74E-07
8.8E-09
1.371696
0
0
[Code] ........
When I record a macro it sets the autofill range as the bottom of what ever worksheet I recorded it on.
How can you write a macro that goes to the last row of each worksheet.
Sub Macro1()
'
' Macro1 Macro
'
' Keyboard Shortcut: Ctrl+a
'
Range("A1").Select
Selection.AutoFill Destination:=Range("A1:A122"), Type:=xlFillCopy
Range("A1:A122").Select
Range("B1").Select
End Sub
I have this code present, however the autofill part needs to work by looking at the cells to the right & i dont know how to do this
Sub Merge()
Application.ScreenUpdating = False
Columns("A:A").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlToRight
Range("A10").Select
ActiveCell.FormulaR1C1 = "=IF(ISBLANK(RC[1])=TRUE,"""",RC[1]&RC[2])"
Selection.AutoFill Destination:=Range(Selection, Selection.Offset(0, -1).End(xlDown).Offset(0, 1))
Columns("A:A").Select
Columns("A:A").EntireColumn.AutoFit
Application.ScreenUpdating = True
End Sub
Range("B2").Select
ActiveCell.FormulaR1C1 = "=LEFT(C2,3)"
Range("B2").Select
Selection.AutoFill Destination:=Range("B2:B235")
Range("B2:B235").Select
I have this code here, it basically writes the formula in the cell, then sends it down to the bottom of the list i have. The problem is: It will not always end at Cell B235. It could be more or less. How can i make it so it will auto-fill to an undetermined end of range?
I have the following code...
Sub updateDB()
Cells(1, Range("D1").End(xlToRight).Column).EntireColumn.Select
Selection.AutoFill Destination:=Offset(1, 0)
End Sub
Its erroring out on the Autofill line... All i want it to do to finish the code is autofill one column to the right after it selects the column after finding the first blank cell in row A?
I have this bit of code;
Selection.AutoFill Destination:=Range("j2:j20000")
But I want it to only autofill as far as the data goes in column I rather than down to row 20000
I am making a macro that takes the cell I have selected, extends the selection exactly 3 columns over, and then autofill extends the formulas 3 rows down.
So far I have:
ActiveCell.Offset(0, 3).Select
Selection.autofill Destination:=Range(Offset(0, 3)), Type:=xlFillDefault
The range(offset(0,3)) in the destination doesn't work. What am I doing incorrectly?