I have some code that works just fine until I add another For statement to cycle through a list of part numbers.
The line error is:
Code:
WsStock.Cells(StartRow + Avg, j + 8) = Application.WorksheetFunction.Average(WsStock.Range("H" & StartRow & ":H" & EndRow).SpecialCells(xlCellTypeVisible))
With a message code of "Unable to get the Average property of the WorksheetFunction class".
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
work around the sum error?
Runtime Error '1004'
unable to locate the sum property of the worksheetfunction class
Public Function CalcSheet()
Dim NoSales(0 To 11) As Range
Dim DriveOffs(0 To 11) As Range
Dim Voids(0 To 11) As Range
Dim Shortages(0 To 11) As Range
Dim tNoSales As Integer
Dim tDriveOffs As Currency
Dim tVoids As Currency
Dim tShortages As Currency
Dim X As Integer
Dim NSc As Integer
Dim DOc As Integer
Dim VOc As Integer
Dim SHc As Integer
Dim aNoSales As Integer
Dim aDriveOffs As Currency
Dim aVoids As Currency
Dim aShortages As Currency
Here is the code that generates the error:
Set rng = Range("I:I")
LR = ActiveSheet.Cells(Rows.count, "I").End(xlUp).Row + 2
Range("I" & LR).Value = Application.WorksheetFunction.Sum(rng)
Range("I" & LR).NumberFormat = "#,##0"
and from what I've read on google the .SUM(rng) need to be set to a range, but isn't it already a range? I tried plugging in there Range("I:I") for rng and that didn't work either.
The vlookup worked earlier but now it doesn't and everything looks OK to me. Scroll down a little bit in the code view to see the error line.
HTML Code:
Sub Email_Executed()
Dim OutlookApp As Outlook.Application
Dim MItem As Outlook.MailItem
[Code]...
I am using the "Find" in VBA and wanted to test if the value searched for could not be found.
So I get the
error = "Unable to get the find property of the worksheet function class"
When the text cannot be found.
Dim zz As Variant
zz = Application.WorksheetFunction.Find("xx", "Hello", 1)
I also tried
Dim xx as boolean
xx = Application.WorksheetFunction.IsError(Application.WorksheetFunction.Find("xx", "Hello", 10))
But this produced the same error.
I've noticed error 1004 is very broad and switches its name depending on what you're working with. But I have no idea what it means.
This is the line w/ probs:
Sheeti.Cells(y, 2).Value = WorksheetFunction.DGet(InventoryRange, 3, CriteriaRange)
I looked at protection and Macro security and checked my definitions (that work in other contexts).
Does DGET need to have criteria and database in the same worksheet? My project is working between two workbooks.
I've been using the following code successfully for years. Today I would get the error 1004:Unable to set the visible property of the worksheet class. All my searches came up with someone not realizing they had protected the workbook. As you can see, the first thing I do before trying to set the worksheet visible is to unprotect the workbook. In frustration and on a lark I tried .Sheets("items").Visible = True and it worked. These kind of intermittent errors in Excel VBA are very frustrating. Can anyone tell me what I am doing wrong?
View 6 Replies View RelatedI have been working on this small project and I it works to create checkboxes and check what boxes are checked. However, at the end of checking which boxes are checked there is a pop up error message saying Run-Time error '1004': Unable to get the CheckBoxes property of the Worksheet class. These are the lines of code, where is the error?
Sub IsBoxChecked()
Dim titles(200) As String
Dim wks As Worksheet
[Code]....
I'm looking to loop a comparison code. I'm using dynamic referencing (using x and y) to find maximum values for specific time intervals. The code works on a cell to cell basis, meaning if I input the formula and change the cell referencing manually then the equation will give the desired results. However when I attempted to create a VBA code to speed up the process I kept getting a 1004 Unable to set FormulaArray Property of the Range Class error, I later figured out that the Formula Array function is limited to a certain number of characters so I split up my function into 3 different string formulas. I still get the same error.
[Code] ............
I am having problems with some vba codes when I protect my workbook; 'I get an run-time error 1004 Unable to set visible property of the worksheet class'
The code I am trying is:
Sub Stats1_Return_TextBox1_Click()
ActiveSheet.Unprotect "meme"
Application.Goto Worksheets("BCM Database").Range("L15")
Sheets("Stats 1").Visible = False
ActiveSheet.Protect "meme"
End Sub
How to sort this. One more question is there away of protecting you vba code? stop users being able to view or edit them for instance?
I am getting the following error when i am clicking a Button on sheet1 which is generating duplicate of sheet1.I am trying to delete the button when duplicate is created..Error is:" run-time error '1004' Unable to get the buttons property of the worksheet class" at this line in code"ActiveSheet.Buttons("CmdHistory").Delete"
View 2 Replies View RelatedI've created a class called CStock. It has 5 standard properties (with Get/Let methods) as explained in that article above. Nothing fancy here.
I also want to create a CPortfolio class that has 3 properties: pName, pNumberofPositions, and pHoldings. the first 2 are stardard, but the last one is different. I want it to somehow keep a collection of stocks.
I was having an issue with my vlookups not working properly so I took out the error handler to try and find out why.
It came up with the error "Run-time error '1004': unable to get the vlookup property of the worksheetfunction class"
Below is my code. How to rectify this?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
Dim rng As Range, cell As Range
[Code].....
I'm trying to find the occurence of a date in a range.
Here is the code I'm using:
Windows(todaydate1).Activate
For Each cell In range(Cells(top73, 3), Cells(bot73, 3))
z3 = DateSerial(Year(cell), Month(cell), Day(cell))
Windows("Cash Flow " & todaydate & " PM.xls").Activate
Sheets("Commitments").Activate
However the code stops right on the q3 line where the match function is located. The problem is that I'm getting a Run Time Error 1004:
"Unable to get the match property of the worksheet function class"
This would lead me to believe that the match function is not working. However, in Excel, it does work. Even when using the cell from the other Workbook, it works.
All the dates which appear to be dates are indeed formatted as dates.
The range is good. I've used the immediate window to verify the address and the values of the other variables in play.
?range(Cells(toprw, 2), Cells(botrw, 2)).Address
$B$26:$B$49
Since the correct workbook and sheet is activated, I'm really at a loss here. Below is what the sheet looks like:
Having problems with trying to get my vba code to access the SpecialCells property. Receiving the following error.... Unable to get the SpecialCells property of the Range class. The section of my code is below that is causing the error. Keeps stopping on the "Selection.SpecialCells(xlsCellTypeVisible).Select" line.
Sheets(" Book Query").Range("A6:I6").Select
Sheets("Book Query").Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlsCellTypeVisible).Select
Selection.Copy
Sheets("Inventories and Variances").Select
Sheets("Inventories and Variances").Range("A7").Select
Unable to get the Match property of the worksheetfunction class? Here is my code
View 5 Replies View RelatedI am trying to generate a number based on the Month, Year and then three digits. For Example: 1107-001. I would need it to refer to another sheet for the previous used last three digits. Each month it would start over at 001. On the Reference sheet it would always be in the first column.
View 2 Replies View RelatedI locked the cells on Sheet1 from B4 to B10.
I protect the Sheet1 Review > protect sheet and selected two checkboxes from protect sheet property "Select locked Cell" and "Select unlocked cells".
It is working fine and it does not allow the user to view the locked cells B17:B24 while protection is on.
I have a RadioButton1 on the same Sheet1 and i put the following code behind the button to hide the 4 up to 10 rows. When i will press the button while password protection is on; it is giving me the following error:
Unable to set the Hidden property of the Range class.
I keep getting that error when I'm running my macro. When I debug, it points me to the bolded line in the code below. The larger macro I'm running this function in runs this function some 101 times without error before this happens.
The values of the parameters are as follows when it gives me the error:
Find_Exact("hchen", ws1, "B:B"). The first parameter is the only one that changes in the previously mentioned running of this function.
I am trying to look at column at of two different workBOOKS and then when a match is found take the value from column D in workbook two and copy it to the corresponding row in the current column of workbook one.
this is the code I'm using and I get that unable to get the vlookup function. I thought maybe it was because not all of them will have matches so it could return an error if it is trying to return empty, so I put int on error resume next, and it ran through but never brought over ANY data, and there ARE matches and data to be brought over.
destRng is the range in the current column(that i just inserted) on the active worksheet that we will be putting the new info into. srcRng is the range in column A on the other workbook that the numbers are being compared to. src is just an integer
I am using the following few lines of code:
Code:
Range("A3:L" & ActiveCell.Offset(1, 0).Row).Select
With Selection
.Borders(xlEdgeLeft).Weight = xlMedium
.Borders(xlEdgeTop).Weight = xlMedium
.Borders(xlEdgeBottom).Weight = xlMedium
.Borders(xlEdgeRight).Weight = xlMedium
.Borders(xlInsideVertical).Weight = xlThin
.Borders(xlInsideHorizontal).Weight = xlThin
End With
However am receiving an error: "Unable to set the Weight Property of the Border Class". The odd thing is, I only receive the error on the following 2 lines:
Code:
.Borders(xlEdgeBottom).Weight = xlMedium
'and
.Borders(xlInsideHorizontal).Weight = xlThin
The sheet is not protected, events are disabled, and the range that gets selected changes dynamically based on the number of rows of data in the table, however in this example cells A3:L15 are selected.
I made a macro to plot several line graphs on two axis (up to 5) side by side. I made the macro open up the files i need, and extract the necessary data into a common workbook. I put the common element, time as the x axis and heat as one y axis and pressure as the secondary axis. The source data on the excel worksheet is as follows:
(column A = time; column b = heat1; column c = pressure1, column d= heat2; and so on.
So when i have 3 workbooks i need to compare, it should have 6 lines. 3 sources work fine, but 2 sources gives me the "Unable to set the AxisGroup Property of the series class" error message.
Code:
Range("A1:" & Chr(65 + (2 * lNum)) & CStr(Lastrow + 1)).Select
Charts.Add
ActiveChart.ApplyCustomType ChartType:=xlBuiltIn, TypeName:= _
"Lines on 2 Axes"
ActiveChart.SetSourceData Source:=Sheets("Sheet1").Range("A1:" & Chr(65 + (2 * lNum)) & CStr(Lastrow + 1))
[Code]...
I don't get why it works for 3 but not 2 sources.
The problem is coming from the Else statement.
Code:
Sub LockByColor()
ActiveSheet.Unprotect "pc"
Dim cl As Range
For Each cl In Range("$BO$1:$BZ$45")
If cl.Interior.Color = 6299648 Then
cl.Locked = True
Else: cl.Locked = False
End If
Next cl
ActiveSheet.Protect "pc"
End Sub
I get the "Unable to get the Correl Property of the worksheetfunction class" Error when I try to run the following code
CurrentRow = 2
CurrentColumn = 2
Finalrow = 5
WS2 = Sheet2
Finalrow2 = 5
Num_Records = 4
Correlation1 = Application.WorksheetFunction.Correl(Range(Cells(CurrentRow, CurrentColumn) & ":" & Cells(Finalrow, CurrentColumn)), WS2.Range("B" & Finalrow2 - Num_Records + 1 & ":B" & Finalrow2
Sheets("PRODUCTIVITY").Select
Range("A20").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlDown)).Select
With Selection
.Locked = False (***debug screen is highlighting this line***)
.FormulaHidden = False
.ClearContents
End With
Range("A20").Select
ActiveCell.FormulaR1C1 = "PASTE NEW DATA HERE"
Range("A20").Select
This worksheet was built for use of many users so this sheet is PROTECTED.
The user is instructed to copy/paste information from our internal web into the selected areas in the worksheet.
When i UNPROTECT the worksheet the VBA works fine.
The data in the worksheet spans from columns A to P, and the length (# of records) is variable.
I'm trying to add the xvalues, but I get an error that says "Unable to set XValues property of Series Class"
Set buildSeries = ws.Cells(6, 2)
For k = 4 To Col Step 2
Set buildSeries = Union(buildSeries, ws.Cells(6, k))
Next k
ActiveChart.SeriesCollection(1).XValues = buildSeries
I am having trouble with IsError function consistently catching errors in my call to the Search worksheetfunction. For example, here is a snippet of my code that works just fine:
Code: .....
When I try and run my macro I keep getting an error message saying Unable to get the Find Property of the Range Class and it refers me to:
TeamRef = Worksheets("Info Reference").Range("A3:A120").Find(What:=strFind1, After:=Worksheets("Info Reference"), _
LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False).Address
I am struggling with one problem. I am trying to change formulae of series in a chart using VBA code given below. But I am getting
'Runtime Error 1004, Unable to set the formula property of the series class'
ActiveChart.SeriesCollection(1).Formula = _
Replace(ActiveChart.SeriesCollection(1).Formula, "Sheet1", "test")
