I would like to design a button (with macros),so that users of my excel page do not need to press CONTROL+SHIFT+F1+ALT,which needs to be pressed on my firm to get the new data from a central server.
View 3 Replies
I have a formulas in Sheet1 linked to other sheets, but I have only formula and there are no sheets ( eg: in sheet 1 A1 =Data!A1) where as there is no sheet called Data. I have a macro to import this sheets from a different file.
The problem I am facing is, after importing the sheets, the formula still shows #REF but if I do double click the cell or press F2 and then "Enter" the value appears. I have about 1200 formulas in this sheets.
Is it possible to launch Excel at a specified time without someone pressing a button?
I'm working on a network which has disabled Scheduled Tasks. The purpose of this request is to launch Excel in the early hours of the day so that a macro would run and update the data from a data source. The macro works brilliantly, but I without anyone in the office at 2am to open Excel, I need to find a way to launch it automatically.
Also, I don't have permissions to install programs or add-ins from the Internet. It doesn't leave me with many options, but I'm just wondering if there's a trick that has so far eluded me.
I have a button in a template file, that when clicked, saves the file as a new file with file name based on data in certain cells.
I want to disable the ability to save the file with the Save icon or Ctrl-S, but the button still needs to be able to save it (the button is technically doing a Save As, so no problem there). But, I, as the administrator of the template, need to somehow be able to save updates to the template file. Can this be accomplished by coding Save to work when used with a secret key combination that only I know (I can put it in password-protected VB code)?
Then, as if that's not tricky enough, the trickier part is that once the file is saved as the new file (no longer the template) - re-enable the Save button and Ctrl-S so the user can then save it as many times as they want.
I have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View Relatedhow to record a value of a cell whenever F9 is pressed. The cell I want to record the value of is cell D101, which is a sum function of the previous 100 rows. I'd like to figure out a way to run 1,000 trials or so and record the value in cell D101 each time.
Some more details, if needed: I'm simulating a dice game (craps). There are 2 dice, each dice is based off of RANDBETWEEN (1,6) then the dice are added in a different column to achieve the roll. The payout is then based on whatever number was rolled. I'm summing the payout (D101) and would like to run this trial 1,000 times.
Once I reach Column G and I press enter, instead of going to Col I, How can I get Excel to back back to Col A, but on the next row?
View 5 Replies View RelatedI recently upgraded to Excel 2007. I use Excel with "Allow editing directly in cells" unchecked. In previous versions, pressing F2 would not prevent me from using the mouse scroll, but in Excel 2007 I am unable to mouse scroll which makes it bothersome. Is there a setting somewhere that can enable mouse scroll after pressing F2?
this is a work product and we can't use VBA.
I have set the default in Excel to move across to the next cell after I press Enter. This is fine for most workbooks but I have a particular workbook in which it would be preferable (save keystrokes) for the cursor to move down one cell. Is it possible to have one action as the default but another for a particular workbook?
View 7 Replies View RelatedI have a userform contains a label control .. what I want is showing that label when Caps Lock is on and hide it when Caps Lock is off.
View 14 Replies View Relatedthe title should read... pressing cancel in inputbox, continues the macro... In theory, pressing the cancel button should stop the macros, but it continues as if pressing ok button...
View 3 Replies View RelatedI have the following code to add dash mark to TextBox1 value depending on some condtions (mentioned in the code), the code works perfectly, but when we use Backspace Key to clear some charactors it is conflicting with the code running when changing Textbox1 value.
View 11 Replies View RelatedI have a workbook with a data entry sheet.
The name of the data entry sheet is 'Enter Data Here', and my employees will be filling in information in columns A to U.
I want to be able to accomplish 2 things.
1) When an employee opens the file, he/she is not able to edit any non-blank cells in columns A to U.
2) Employee is able to add data to a new row in columns A to U, and is able to edit this until they press 'SAVE'
Is this possible?
I have a simple formula in cell A2
=A1
But it will not calculate. I have gone to Tools - Options - Calculation to see if calculation is set to Manual but it is Automatic. Is there another setting or have I exceeded some limit?
Imagine you have only one column - column A. In column A you have 500,000 + rows with text like the following:
!magnus
snooze'
sleepy/
act noun
act verb
Today&tomorrow
*bialgebras
/dev/ null
dev
ull
1970;
Dwight Schrute
and your goal is to figure out a way to simultaneously transform the above rows into:
snooze
sleepy
act
act
Todaytomorrow
bialgebras
devnull
devnull
1970
DwightSchrute
I know I can use Filter and filter out characters like &'!/; but that takes too long because I have a lot of lists to go through with thousands of entries. There must be a macro that will close spaces between words when only one space exists, but eliminate every word if 2 or more spaces exist between words - as well as eliminate unwanted characters like the ones I described above. I know I could use substitute and eliminate the spaces between words =substitute(a1," ","") but then I'd have to filter each and every instance of unwanted character.
I have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.
The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.
The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."
One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!
I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!
Can I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
View 2 Replies View RelatedIs it possible to lock the computer using VBA. i.e Simulate pressing Ctrl+Alt+Delete and then clicking Lock Computer so once this has been clicked the user will have to enter the password to unlock. I thought that using the SendKeys would be a start but this does nothing.
SendKeys "^%{DELETE}"
DoEvents
Are we limited to just the Control key to run macros?
Can I use the Alt key?
Is there a way to remap keys in Excel? I would like to remap the F1 key.
View 2 Replies View RelatedI am having trouble with the 2003 Alt keys in 2007 ..
I have 2 computers (work & home)
The work computer works fine ... when i use same files on home computer some alt key features wont work?
Example Alt E S T .... (paste special formats)
Any ideas .... I've looked at sharing / protection ... cant find anything to fix it....
It cant be protection because the paste special formats works fine with a mouse or the new 2007 Alt key commands?
Just about ready to remove and re-install...
Is it possible to create a script that will allow mimic the keypress of a keyboard?
For example, if I press the windows key and R, windows will bring up the run box and then I can type in C:Windows and press enter and it will open C:Windows.
Is it possible to have Excel do this?
This would mean I create a macro that has keypresses programmed in so I can run a command prompt and enter some details there then copy the data and paste it into Excel.
I scratched this macro to autosort on more than three keys on a cell change...but is not working:
Dim rng As Range
' Set Target Range, i.e. Range("A1, B2, C3"), or Range("A1:B3")
Set rng = Target.Parent.Range("A2:V1500")
' Only look at single cell changes
If Target.Count > 1 Then Exit Sub
' Only look at that range
If Intersect(Target, rng) Is Nothing Then Exit Sub
' Action if Condition(s) are met
' Do your thing here
rng.Sort Key1:=Range("G2"), Order1:=xlAscending, Key2:=Range("F2") _
, Order2:=xlAscending, Key3:=Range("E2"), Order3:=xlAscending, Key4:=Range("C2"), Order4:=xlAscending, Key5:=Range("B2")
, Order5:=xlAscending, Order1:=xlAscending, Header:=xlGuess, OrderCustom:=1, MatchCase:= _
False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, DataOption2 _
:=xlSortNormal, DataOption3:=xlSortNormal, DataOption4:=xlSortNormal, DataOption5:=xlSortNormal
End Sub
The error goes to Key 4 saying itīs a compilation error, argument with name doesnīt founded.
Does anyone know of any way at all to trap a function key while a userform is being shown, or will I need API for that?
Sorting by variable keys
I have some code in a macro:
Is there a way to remove a value from a collection after I've added it.
I have simplified the code I'm using to highlight what I'm trying to do.
Basically I'm adding 10 keys to a collection and want to remove the last one. There is a reason for this.
The following macro works when I run using Alt+F8+Enter
The macro also works when it is linked to a button on the worksheet.
However, it does not work when I try to use the keyboard shortcut Ctrl+Shift+P.
I've tried adding the shortcut key code into the macro -- still doesn't work.
I've tried changing the shortcut key to a different letter
I am trying to create the game of snake in VBA as practice, but I cannot find how to use the arrow keys as input. From what I have read it seems that it may not be possible, but how to change the value of a variable every time an arrow key is hit, post how to do so.
View 2 Replies View Relatedi am a rowing coach and have to enter a lot of splits every day after practice and am hoping to find a way to do it without having to use the : or . keys.
so a split like 1min. 27.5sec, displayed as 1:27.5 could be entered as 1275.
i see that there are some questions already about this but seem to just work with H:M:S and time of day, i tried but wasn't able to use these for my purpose.
another fly in this ointment is that i also enter heart rates on the same sheet so in A1 it would be splits A2 heart rate, A3 split A4 HR.....
i do this for approximately 40 rowers each day with different workouts each day so each worksheet has splits and HR in different rows and columns.
