I have a formulas in Sheet1 linked to other sheets, but I have only formula and there are no sheets ( eg: in sheet 1 A1 =Data!A1) where as there is no sheet called Data. I have a macro to import this sheets from a different file.
The problem I am facing is, after importing the sheets, the formula still shows #REF but if I do double click the cell or press F2 and then "Enter" the value appears. I have about 1200 formulas in this sheets.
I would like to design a button (with macros),so that users of my excel page do not need to press CONTROL+SHIFT+F1+ALT,which needs to be pressed on my firm to get the new data from a central server.
View 3 Replies View RelatedOnce I reach Column G and I press enter, instead of going to Col I, How can I get Excel to back back to Col A, but on the next row?
View 5 Replies View RelatedI have set the default in Excel to move across to the next cell after I press Enter. This is fine for most workbooks but I have a particular workbook in which it would be preferable (save keystrokes) for the cursor to move down one cell. Is it possible to have one action as the default but another for a particular workbook?
View 7 Replies View RelatedI have a simple formula in cell A2
=A1
But it will not calculate. I have gone to Tools - Options - Calculation to see if calculation is set to Manual but it is Automatic. Is there another setting or have I exceeded some limit?
Imagine you have only one column - column A. In column A you have 500,000 + rows with text like the following:
!magnus
snooze'
sleepy/
act noun
act verb
Today&tomorrow
*bialgebras
/dev/ null
dev
ull
1970;
Dwight Schrute
and your goal is to figure out a way to simultaneously transform the above rows into:
snooze
sleepy
act
act
Todaytomorrow
bialgebras
devnull
devnull
1970
DwightSchrute
I know I can use Filter and filter out characters like &'!/; but that takes too long because I have a lot of lists to go through with thousands of entries. There must be a macro that will close spaces between words when only one space exists, but eliminate every word if 2 or more spaces exist between words - as well as eliminate unwanted characters like the ones I described above. I know I could use substitute and eliminate the spaces between words =substitute(a1," ","") but then I'd have to filter each and every instance of unwanted character.
Can I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
View 2 Replies View RelatedI have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
how to record a value of a cell whenever F9 is pressed. The cell I want to record the value of is cell D101, which is a sum function of the previous 100 rows. I'd like to figure out a way to run 1,000 trials or so and record the value in cell D101 each time.
Some more details, if needed: I'm simulating a dice game (craps). There are 2 dice, each dice is based off of RANDBETWEEN (1,6) then the dice are added in a different column to achieve the roll. The payout is then based on whatever number was rolled. I'm summing the payout (D101) and would like to run this trial 1,000 times.
I recently upgraded to Excel 2007. I use Excel with "Allow editing directly in cells" unchecked. In previous versions, pressing F2 would not prevent me from using the mouse scroll, but in Excel 2007 I am unable to mouse scroll which makes it bothersome. Is there a setting somewhere that can enable mouse scroll after pressing F2?
this is a work product and we can't use VBA.
Is it possible to launch Excel at a specified time without someone pressing a button?
I'm working on a network which has disabled Scheduled Tasks. The purpose of this request is to launch Excel in the early hours of the day so that a macro would run and update the data from a data source. The macro works brilliantly, but I without anyone in the office at 2am to open Excel, I need to find a way to launch it automatically.
Also, I don't have permissions to install programs or add-ins from the Internet. It doesn't leave me with many options, but I'm just wondering if there's a trick that has so far eluded me.
I have a userform contains a label control .. what I want is showing that label when Caps Lock is on and hide it when Caps Lock is off.
View 14 Replies View Relatedthe title should read... pressing cancel in inputbox, continues the macro... In theory, pressing the cancel button should stop the macros, but it continues as if pressing ok button...
View 3 Replies View RelatedI have the following code to add dash mark to TextBox1 value depending on some condtions (mentioned in the code), the code works perfectly, but when we use Backspace Key to clear some charactors it is conflicting with the code running when changing Textbox1 value.
View 11 Replies View RelatedI have a workbook with a data entry sheet.
The name of the data entry sheet is 'Enter Data Here', and my employees will be filling in information in columns A to U.
I want to be able to accomplish 2 things.
1) When an employee opens the file, he/she is not able to edit any non-blank cells in columns A to U.
2) Employee is able to add data to a new row in columns A to U, and is able to edit this until they press 'SAVE'
Is this possible?
I have a button in a template file, that when clicked, saves the file as a new file with file name based on data in certain cells.
I want to disable the ability to save the file with the Save icon or Ctrl-S, but the button still needs to be able to save it (the button is technically doing a Save As, so no problem there). But, I, as the administrator of the template, need to somehow be able to save updates to the template file. Can this be accomplished by coding Save to work when used with a secret key combination that only I know (I can put it in password-protected VB code)?
Then, as if that's not tricky enough, the trickier part is that once the file is saved as the new file (no longer the template) - re-enable the Save button and Ctrl-S so the user can then save it as many times as they want.
I have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.
The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.
The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."
One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!
I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!
Is it possible to lock the computer using VBA. i.e Simulate pressing Ctrl+Alt+Delete and then clicking Lock Computer so once this has been clicked the user will have to enter the password to unlock. I thought that using the SendKeys would be a start but this does nothing.
SendKeys "^%{DELETE}"
DoEvents
I really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column <> 1 Then Exit Sub
Application.EnableEvents = False
[Code].....
This formula must be confirmed with CTRL+SHIFT+ENTER not just ENTER. You will see { } brackets appear.
View 3 Replies View RelatedI'm havin' a chart for interest, instalments and so on;
Interest [X%] Loan [Z crowns/dollars]
Loantime [Y years] Instalment [formula, which is "=Z/Y/12"]for each month.
Year, Month, Loan(left), Instalment, Total payment
1, Januari, =Z, =Instalment (constant), =Interest+Instalment
Month, Loan(left), Interest
Februari, =above-Instalment, =X%*Loan(left)/12 (rent is divided per year),
Instalment, Total payment
Constant, =rent+Instalment
and so on... as long as you want ^^ (it's quite messy, but try :D)
The question is as follows "What would a loan of 900'000kr with 9% interest rate totally cost over 30 years?"
[use "IF" to avoid getting anything written after the loan expires]
The question itself can be easily solved by just dragging the formulas down to 30 years and fill in the % and loan etc. But what I do not understand is the "IF" question. I'm supposed to use the IF function to instantly show the cost of the loan (total rent payment) after the 30 years? That's how I understood it. In that case... how do I do that? ^^
I know how to avoid getting the #N/A in a vlookup, but I have found situations where I have data matches and still get #N/A. For instance, I am looking up an item number (which contains numbers and letters) on one tab to find corresponding info on another tab. I've verified that the item number is indeed in the lookup range but I still get the #N/A. If I copy and paste the item number over the same item number in the lookup range then it works. However, I don't want to do this for each item number.
=AVERAGE(IF(A:A=B6,IF(C:C>0,C:C)))
"A" is a duplicated rep field and "B" is unique rep IDs and "C" is a sum of product types purchased. I'm averaging the number of product types sold by each rep.
I need to modify it to remove the #DIV/0! error it generates. It calculates just fine by row (with the error on some rows), but when I use that calculated field as an element in another formula, the #DIV/0! blows up the second formula. I tried a second IF function tied to the sales field "D" but I don't think I nested it right.
i just want to ask if there's any way to make this a whole number?
-> 1.222.33
it should be 1,222.33, but the problem is they input it as like that, i want to copy and paste all the numbers without doing pressing "f2" and delete the period to make it a whole number.
I have a set of data containing "N/A" in some cells, and when I try to plot the chart using stacked lines chart type, the chart is completely off. if the "N/A" are causing this problem and how to fix this.
View 5 Replies View RelatedTransferring Multiple Data from separate worksheet without duplicating"
As you can see i am looking for information in column d (Letter) and getting the result to show from column B (number) using the formula in Column G (result 1).
The problem i am having is that if i try to copy or drag the formula down into Result 2 i just get the same answer.
Is there any way for the next cell down to ignore the previous result?
I've attached an example of what I am trying to achieve and an explanation as well. I'm trying to avoid the use of a macro as I don't understand them and I will need to modify the sheet later on which could cause problems. However, if a macro is the only solution, then I will have to make due with one.
View 5 Replies View RelatedI would like to avoid user to SAVE or SAVE AS file. In my macro I used code to disable SAVE and SAVE AS from FILE menu. But how to avoid to save file if user use CTRL+S command to save file?
View 7 Replies View Relatedthe data is as follows:
Data  ABC1Timestampname 21/31/2012 11:07:13abc931/31/2012 11:07:50def 41/31/2012 11:10:03a 51/31/2012 11:17:12b 61/31/2012 11:17:14a 71/31/2012 11:17:15a 81/31/2012 11:17:16a 91/31/2012 12:39:41cv 101/31/2012 13:04:00k 112/1/2012 7:26:53k 122/1/2012 7:26:56dg 132/1/2012 7:41:05Gw 142/1/2012 8:01:19cg 152/1/2012 9:32:14CB 162/1/2012 9:32:15CB 172/1/2012 9:32:15CB 182/1/2012 9:32:17CB 192/1/2012 9:32:26kw 202/1/2012 10:24:54jw Spreadsheet FormulasCellFormulaC2=SUMPRODUCT(--(MONTH(A2:A20)=1)*(YEAR(A2:A20)=2012))
if you see the cell a6 to a8 happened in millisecond same person has punched i want to count it as one only
I have to type a an ID in column D of a worksheet called “restricted funds”, I have 13 sheets in that workbook and each sheet has in column D some IDs, I can not type a duplicate ID, in the that sheet. What is the best way to avoid no duplications. IDs are simply numbers.