How can I change the default settings I get with a new Excel document?
What I want is that when I create a new Excel document, all cells should have Comic Sans MS font, Bold & size 10, with a particular horizontal and vertical alignment etc.
I am not able to do these changes using settings in Option menu.
how do i change the default settings in excel, for example when i open excel it shows numbers on both rows and columns and i want it to show letters on the colunms. i know how to change the r1c1 reference style but how do i get it to stay the way i want?
View 4 Replies View RelatedWhen i record a macro with an autofilter, the default setting is always "equals". Is there any VBA code or anything to be able to change so that my macro will search in a "contains" setting.
View 9 Replies View RelatedI am working on lots of excels, with data queries from sql and pivot tables. Is there a way to set defaults to some settings in excel (not in this specific file).
To be more specific:
1. Import data from SQL: Refresh on opening, save password
2. Formatting of number to have two digits and a comma separator
3. Pivot table: when adding to values sum instead of count, refresh when opening the file
We have printer mailboxes setup for all of the employees and sometimes the print settings get saved in the excel files. This means that when another employee uses the file their prints get sent to the wrong mailbox. We have hundreds of files like this and it causes all kinds of problems with prints going to wrong mailboxes!
Obviously their default print settings are all set to their own mailboxes.
Is there some way, using vba, to get an excel file to go back to using the user's default printer settings instead of the ones saved in it's file? (or get it to remove the printer settings saved in it's file). That way I could just make an application level open event to fix the problem! Either that or some way, in vba, of changing a user's storage box number for a specific printer.
I am creating a spreadsheet on a British-based system using the d/m/y date system as default, but I am unfortunately entering data using the american m/d/y system and would like to change the default to the american system.
View 5 Replies View RelatedWhen I place a text box in Excel 2010, the default is for everything to be locked (Box is locked AND text is locked). I want to change the default setting so that when I start Excel fresh, anytime I place a text box the "LOCK TEXT" box is UNCHECKED.
There's a place where you can select "Set as default text box") after you make the changes, but it's not sticking (even in the same document without closing. IE, I make the changes to a text box, then click the option that says "Set as default text box", place a NEW text box immediately in the same document but the text is still locked.
how to change the default settings for shapes in Excel 2007? I select a line tool and it is a blue color and I would like to have its default as black
View 6 Replies View RelatedI know Excel is supposed to guess if there is a heading row or not when you're manually sorting a group of columns. But, more often than not it seems, it guesses incorrectly, forcing me to go through the multiple steps of the "Custom Sort" menu. Most of the manual sorting I do does have a Header row.
Is there a default setting somewhere to force the sort to always assume there is a Header row? I can't find any.
My office recently upgraded to Office 2010 and we would like (in the accounting department that I work in) to change the default number formating in a blank sheet to Number, 0 Decimals, using seperators, from the current default of general format number.
I have looked for the Book.xltx file to replace but can't see it any where.
I have about 100 different workbooks that all need to have the same format and page set up for printing. The different workbooks just all need to be setup to have landscape.
View 4 Replies View RelatedIs there anyway to change the security settings in Excel 2007 using VB macros? I have tried to record the macro as I change the settings but nothings is recorded.
Basically I have two workbooks, and I want to run one of the macros within workbook 1 from workbook 2. This is straight forward, however why I try to run it, excel says that the macros are disabled in the other workbook, but I know they are not, they are all enabled (bottom option)
I was hoping to find some way of fooling Excel into thinking the macros were enabled by changing the security settings (actually keeping them the same, but making excel think that i've changed them) before I try to the macro from the other sheet. I don't know if i've explained myself very well here, I hope I have, if not let me know and i'll try to go into more detail.
I am trying to change data vailidation settings on Sheet1 based on a state name provided on a separate worksheet (Sheet2). The below code is part of a macro that is assigned to a button on Sheet2. The issue is when the state name changes on Sheet2 and the button is pushed to initiate the macro to run, the state validation does not change on Sheet1.
View 2 Replies View RelatedIs there any way to change the settings in excel 2007, to give me the original color palate from 2003? I want to use the old colors because I don't like the new ones.
View 2 Replies View RelatedI have a big table with lots of columns for which I want a pivot to sum the data in the columns. Most likely because there are lot of blanks in the data Excel automatic makes a count of the data when I drag it into the pivot table. Now I have to change for each column one by one the Value field settings from count to sum. Is there a way to change the Value field settings for multiple columns at once from count to sum? If not can I somehow change the settings of the pivot table so default the Value field settings will be sum when I drag it into the pivot table?
View 4 Replies View RelatedWhen I open up a new workbook it automatically contains 3 macros that I mistakenly added when I was experimenting a few months ago. How can I remove these macros from the default new workbook?
View 3 Replies View RelatedI have a range of cells ( C2, C5, C8:N1007, P8:P1007 ....) on a worksheet that I want to be able to clear the contents of through a macro - worksheet is entitled Database
I have 3 additional worksheets all of which have summary information on and some of the formulas are huge.
I've inserted a module and produced this code;
Sub ClearContents()
Application.Calculation = xlCalculationManual
Range("C2, C5, C8:N1007, P8:P1007, ....").ClearContents
Application.Calculation = xlCalculationAutomatic
End Sub
Because of all the 3 summary page formulas the code is taking a few seconds to run.
I'm new to VBA and just wondered whether I could switch the calculation setting for the entire workbook onto manual at the beginning of the code and then switch it back to automatic at the end of the code? Think this might speed things up.
Currently, I have switched my referencing style back to the default mode; however, every time I restart Excel, it switches me back to the R1C1 Reference Style. Is there a method to prevent this, instead of unchecking the option every time?
View 8 Replies View RelatedThe following line of VBA code executes properly if machine settings are US English, but throws a "Run-time error '1004': Application-defined or object-defined error" ? ...
View 9 Replies View RelatedHow to change these defaults...
It involved opening a new workbook and changing the number of worksheets in a new workbook, cell sizes, font, and font sizes... and then saving the workbook in one of the system folders under the name "workbook" to change the default workbook attributes, or "worksheet" to change default worksheet attributes.
inability to set a default row height and still allow the occasional row that requires more space (i.e., one of it's cells has multiple lines of wrapped text) to AutoFit if necessary.
Say you have the data shown in NormalSettings.png in an Excel file (see attachments) and you want to have a little more room between the shorter rows, but not have them all set as big as the expanded rows. One way to do this in bulk is to select the entire spreadsheet and set a fixed row height, but this chops off any cells that require more space than your default height (see FixedRowHeight20.png). The only way to fix this is to manually scan through your sheet and individually select all rows with cells that need more room than your preferred row height and AutoFit them (good luck if your spreadsheet is any size...) . If you try selecting the entire sheet and choose Format-Row-Autofit, you're back to the crowded display shown in 'NormalSettings.png'.
My workaround to this annoying problem is this: choose a column that you're not using (I just select the very last column in the sheet by holding down CTRL and pressing the right arrow until the screen stops moving) and highlight the entire column by selecting the column header. Then increase the font size for that column...voila, even your blank rows will now AutoFit to the new font size rather than the font size you are using for your data...effectively increasing your default row height without sacrificing AutoFit capabilities. I find that using 16 as a dummy font size makes my data (which is font size 10, Arial) look nicely spaced out, but experiment and try stuff until you find what you like!
I have got a buttion that changes various layout and borders for the page then shows a printpreview, after printprewiew closes.
Then a msgbox that askes if you would like print. Is there a way to change the defult printer between local printer and adobe distiller(.pdf) as a dropdown option box. Or Yes for Local printer and NO for adobe distiller(.pdf) using vbYesNoCancle.
When I open Visual Basic Editor and insert a module,the default name
is "Module1",How can I change the default as "Mymod1" or others ,and if
I insert another module later,it can be named as "Mymod2" by default?
I have searched the registry and found nothing about the item.
I am setting the fill color of a cell by setting the .Interior.Color property and using the RGB() VBA function. My VBA code saves the spreadsheet in Excel2003 format at the end of the creation process. This has worked great and my spreadsheets looked correct when reopened in Excel 2007. When these same spreadsheet files are opened in Excel 2003 the colors are all very different. Does Excel 2003 handle colors differently than Excel 2007? Is there a preferred way to specify colors that will work on both platforms?
I have attached a specific example. The color is #B4CF27 or RGB(180, 207, 39). When I open this sheet in Excel 2007 the color is a shade of green (the desired color). When I open it on Excel 2003 I get yellow. I tried swapping the red and blue values thinking there might be some byte ordering issue and it does not produce the yellow on Excel 2007.
I need to default size to be bigger. Is there a way to do this so I do not need to re-size the box every time?
View 2 Replies View RelatedI want to set the default row height as 20.0 (not excel's standard 15.0). When I delete the contents in a cell that has Wrap Text property enabled, the row always reverts back to default height of 15.0 and this is too small. Is there a way to chnage the default?
View 6 Replies View RelatedWhenever updating an Excel file and saving it as a new file, a "Confirm Save As" window appears. The default is "NO" (No is Highlighted). Conversely, in MS Word, the default is "Yes" (and, YES is highlighted). I would like to change the default from NO to YES in Excel.
View 1 Replies View RelatedI would like to change the default color of any excel sheet I use to grey from the standard white and I am struggling to find out how this is achieved.
In other words, I am trying to have all cells in the sheets I work with appear grey on my screen by default. A coworker of mine used to work in banking and she has grey cells but does not know how she changed them.
When I use the GetOpenFilename() method, it seems to default to the particular users My Documents. Is there a way to force it to default elsewhere like a share drive, or the users desktop?
In the same line of thought, if I have a file named TestFile.xls. and I want to try to open it from the users desktop if they have it, how can I do this, since their desktop location is different than mine?
I'm trying to change the default colour palette for "fill colour" and "font colour". The way I've been doing it before, is to have a spreadsheet with the colour palette I want in my XLSTART folder, and then when I open a new document, going to tools->options->color->copy colors from, and selecting that spreadsheet.
However, this is a pain, and I was wondering if I can just set the colour palette to have my colour scheme already there, whenever I create a new spreadsheet.