I am trying to link data that has been entered into a inputbox with a range of cells.
My goal is to allow the user to answer: how many people sat the exam?
Therefore when a chart is automatically produced only the cells with the required data are selected.
So, my range is A2:C*
* being the user input.
I need to plot multiple series in a scatterplot. The problem is that the number of series is user-defined. And also, the number of data poitns in each series is different. I've looked it up already, but a lot of the examples i've seen don't account for the fact that I need to run through a loop and add series into my graph.
In other words, i need a way to select a certain range each time it runs through the loop, and add the data as a series into the chart. Also, the user enters how many series there are, so I use that as a counter
What I want to achieve is a script that would create a new scatter plot of multiple series from a selected block of cell. I found a thread that was similar but what is different from my data is that my x values are different for each series.
The format of the data is in the following format, the first series will the first x,y pair, the 2nd series would be the second x,y pair. I don't know if it'll be an issue but one thing is that the date might be different lengths. For instance, the 3rd series, only has 4 data points, whereas the other series contains 6 data points?
x0.200.400.600.801.001.20
y5.002.501.671.251.000.83
x0.100.200.300.500.701.30
y5.002.501.671.000.710.38
x0.100.300.400.50
y6.672.221.671.33
So essentially, is there a way I can have the script say, select your range, and then graph the selected range as a scatter plot?
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
Is there a way of determining the series that has been selected on a chart?
View 3 Replies View RelatedI have a large amount of data recorded from a logging device which i then need to convert to a graph. Is there some nice coding to enable the user to select a range of dates from column A and times from column B then allow the user to select the column in which relevant data is contained and plot a line graph of the data contained with named axes.
View 9 Replies View RelatedI have figured out how to write a macro to make charts for me automatically, but it only runs the macro on the exact same range every time.
I have about 100 different students to make charts for and would really like to find a way to do it more automatically
Is there a way to write a Macro so that I can run the same steps on a different range (same number of rows and columns)?
Edit: having learned from my first post, I am adding more information.
the first chart is from the data in the range from B5-H7
the next chart would be from the data in the range from B11-H13
The charts are not evenly spaced from each other. I will need to select the range (same size) each time.
I can record the Macro, I just can't apply it where ever I want to.
I have several worksheets with thousands rows (independent variables) and hundreds columns (all dependent variables). Each line basically gives me hundreds values for each independent variable - see below:
...
C9 39.65 653.95 5.28 163.56 99.56 14.49 ... ...
E9 7535.92 21500.56 2835.88 3122.98 7225.34 5371.25 ... ...
G9 111568 298021 12940 31645 181797 36996 ... ....
...
I need to know how the values in each row are distributed, and I ideally plot a 2D column graph of the distribution. Is there a way to do that and create/program a macro (with relative button on the workboook) that does it automatically once clicked?
Very often there are outlying values (bigger or smaller by a factor of 1000 or even more), mistakes, which I would like to identify and fix possibly.
how can I provide a chart that display as a line chart twelve months of data for the item selected starting or ending on the data that I have selected
View 4 Replies View RelatedI have a macro which I manually have to change the range in order to run the macro, e.g. Set rngData = Range("B4:I12")
rather than having to change the range for each macro, I was wondering if I could run the macro for the highlighted area. I have tried this, but doesn't seem to work.
Set rngData = Range. CurrentRegion.Select
I have a Choose function that is used to determine which range I need. e.g. =Choose(Choice,Cell,Cell,...).
In each corresponding "Choice" cell is a typed range. e.g. $B$33:$L$70
I'm looking for a way to be able to use this typed range as the range for some chart data.
I'm currently on Manual Calculation mode. I have formulas in cells A1 to A10 which has not been refreshed. Can I select only range A3 to A6 and recalculate only those cells?
View 5 Replies View RelatedI need help please. Using a macro, I have selected the range C7:C12. Now I need to keep this selection and expand it 18 columns to the right. This would give me a selection of C7:U12.
The original range changes at various times. Some times it might be C7: C452 etc.
I know it's easy, but I can get the code to keep the selection.
I have a range (of 2 rows) that are set up as a header row and sub row. I want a macro to insert these above the active row (ie. where the user places the cursor), but when I select and copy the range in the macro, I don't know how to refer back to the 'active row' because that's not active anymore.
I'd also like the cursor then to be placed into one of the cells in the new row, ready for the user to start editing.
I am looping through a selected range. The code searches through column B and finds any data. If found, it returns the value to a different workbook to column B. When there is no more data, it goes to column C and does the same thing. My problem is, when there is no data in a column it returns a blank. How do i get rid of this blank???
View 1 Replies View RelatedCount & Sum is one of the most usefull function in the Excel,
I always used this, Is it possible in VBA to create such code that if I Select a range and click on Commandbutton1 automatically one msgbox display with the Count & Sum of the Range Item
eg. If Range A2 to A5 has a number like 50,10,20,10
here if the command button is click automatically one msgbox is display
which showing the
-Total Sum of the Seletced Range is 100 and Total Count is 4
I'm trying to create an if statement that have 2 criterias. Here's what I've created:
=IF(COUNT(F2:F4)=('2007Open'!H2:H4),COUNT('2007Open'!B2:B4)=8,'2007Open'!H2:H4)
This statement is returning the #VALUE error.
I guess what I'm trying to do with this statement is to count how many values are not equal to 2007Open!H2:H4 and meets another criteria of 8.
I am using the following code to Autofill a formula through a variable range:
Selection.AutoFill Destination:=Range(MyFormulaCell, TerminalCell), Type:=xlFillDefault
MyFormulaCell is the cell with the formula, and TermnialCell is a variable set on a count of rows. This is working great, and I can loop through this for the columns I need to copy just fine by incrementing values, but as I apply this to several sections, it's taking me up to a minute to run the macro. In this "I want it now" day and age, I'm sure my coworkers for whom I am making this will not be happy to wait that long.
Is there a way that I can incorporate a selected range into this method?
I'd like to set MyFormulaCell to:
Range(Selection, Selection.End(xlToRight)).Select
and then autofill the formula down the number of rows contained in TerminalCell.
I have a form that asks at what row the user wants to start with a selected range then how many rows to select. There will always be 21 columns selected with this range. I am still learning but it has to do with something on how I am setting the Start object. It is not being recognized.
Dim Row As Long
Dim Selection As Long
Dim Start As Range
Row = txtStartRow
Selection = txtHowMany
Set Start = Range("A" & txtStartRow).Select
Range(Start & ActiveCell.Offset(Selection, 20)).Select
My data is in one column as follows:
ABC
(BLANK)DEF (BLANK)(BLANK)
What I want to do is to delete the blank cells and count how many not-empty cells.
The following sub works fine if I put the active cell manually in A1. However, the first range select always give me the "1004" error. Why? I don't have any clue.
Range("a1:a5").Select
Do Until ActiveCell.Value = "stop"
Do Until IsEmpty(ActiveCell)
Selection.Offset(1, 0).Select
Loop
ActiveCell.Delete
Loop
I am trying to name a selected range in VBA in order to use it in a vlookup table. Code I have so far is as follows:
ActiveSheet.Name = TextN
Range("c9"). CurrentRegion.Select
Call formatting
ActiveWorkbook.Names.Add Name = "formTextN", RefersToR1C1 = Worksheets(TextN) & "!" & "r9c2:r45c13"
The formatting works, but the selection does not get named.
I have a spreadsheet with names of students, year groups, subjects and others. My VBA code will analyse student's results, but before I get there I would like the user to be able to select groups of students using listboxes.
Now I have a tonne of variables that I won't bore you with but the main thing I would like to do is to scan through each cell in a range on my spreadsheet and determine if the value of that cell is equal to a selected option in the listbox. This will let me, for example, filter by only Year 10 students, or select to display only Year 9 and 11 students.
I already have the code to scan through each cell:
VB:
'Run through each student and check they match the criteria
For N = 1 To StudentList.ListCount
'Split the first and second names
StudentName = Split(StudentList.List(N - 1))
[Code] .....
Essentially, I would like to take the cell "A" & N2 and check to see if it matches one of the selected options in a listbox called "YearList"
i have data in range c10:h100
i want if select a cell e.g = c15 then
highlight the range c10:c100 with color
now highlight the all row only highlight defined range
I have a macro which sorts data within a cell. This is working perfectly fine but the only problem with this is that it works only for a single which is selected. How can I apply this macro to range of cells I select using a mouse.
View 3 Replies View RelatedWhat I need is the following: I select a range of numbers and for this range I want to calculate the 1/3th and 2/3th percentile, and these should come in two cells that I can easily change in the vba code.
Some formula in which I can give two inputs: first the range of which it has to calculate the 1/3th and 2/3th percentile and a second input which is just a number and than the vba should say whether that second input is in the first range (between 0 and the 1/3th percentile value) or in the second range (between 1/3th and 2/3th percentile values) or third range (between2/3th percentile value and highest value).
I have the following code that selects a range based on the rows that have data in the sheet, starting with row 10:
[Code]....
This works well, but by default it captures all columns with data. I'm not sure how to then change it to only capture specific columns.
For example, if I only wanted columns B:D for rows with data, changing it to
[Code] .....
does not work, because the SpecialCells selection overrides that and still returns all columns with data.
Is there an easy way to drop column(s) off of the currently selected range after SpecialCells captures the range?
I am working on some code to copy data from one sheet to another, but I'm not sure if I'm going about defining the copy range correctly. I would like it so that the user can highlight a range of cells on the sheet between A3 and F last row (last row based on col C). However the user should be able to highlight rows in any column between A and F, and they could highly the records with just one column or multiple columns. It should take the row numbers of the highlighted range and use the that as the row number to extract the data from.
[Code] ........
Im currently getting runtime error 13 on 'CopyRange = Selection.Rows'
'CopyRange = Selection.Row' returns the single row number for the first cell in the selection, but i need the range of all the rows in the selection.
I want to use the Worksheet SelectionChange event to update part of my worksheet/UI depending on what cell(s) the user has selected.
As an example, if I have two named ranges - $A$1:$B$10 and $C$1:$D$10 - I want to detect whether the user is in range 1, range 2, or neither, then update elements of the UI.
I have some code that uses offset to select a column of numbers
View 2 Replies View RelatedThe VBA code (in the code window) runs nicely on the range B10:B1000, but I'd prefer that it only run on a range I define by the cells that are currently highlighted/selected on the active sheet. How should the line of
Set SHOPS = Range("B10:B1000")