# Check Font Color And Return A True Or False

Nov 24, 2008I am looking for a formula to return either True/False in Column J if the font color in Column H is Red.

Is there a formula that can do this?

I am looking for a formula to return either True/False in Column J if the font color in Column H is Red.

Is there a formula that can do this?

ADVERTISEMENT

I have several rows with numbers that is either 0, a balance or a text like n/a. I need a formula that return true if all are 0 or contain n/a. If there is one balance shall it be false. Any suggestion? See example:

View 6 Replies View RelatedI'm trying to assist is working with sensitive data, and for security reasons I am unable to post the Excel sheet here. Here goes:

The user is working with a sheet in which uses checkboxes, and wants to assign values from cells in the same row as the checkbox to corresponding cells in the sheet (not a different book) if the box is checked.

I guess I should just ask what the best way to accomplish this is? I was thinking I need to do an IF test (do checkboxes return TRUE/FALSE?) and then assign values from the cells I need to corresponding cells in the next sheet. The big question for me using this method: how can I use a single IF statement to assign multiple cell values?

I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.

View 2 Replies View RelatedHi. Is there a way to make OR() return 0 or 1 instead of true and false?

Or to convert true to 1 and false to 0?

I have a master spreadsheet which shows agreeed rentals for vehicles, on the sample this is the "OCS" tab. I receive a spreadsheet which contains the actual rental charged, in my example this is the tab "Invoice" in my example the VRN are in the same order on both sheets, in reality the invoice spreadsheet is not in the same order as my OCS sheet. My task is to match the VRN field in the invoice sheet to the VRN in the OCS sheet, then look at the amounts and if they match then return "true" if they don't return "false

View 2 Replies View RelatedIf a value in cell A1 on Sheet Report is found in Range B2:B10 on Sheet Hierarchy Then return True Else False

I have the following so far:

[Code] .....

I want Match to be either True or False. Also, is there a way to know the cell the value was found in if True? How do I make this work?

I have no idea where to begin on this problem.

Group Name / Data

A / .01

A / .02

A / -.02

B / .05

B /-.01

C /.02

C /-.03

I need one true or false return for each group if the absolute value of the differences in any combination of a group's data is greater than or equal to .05.

Expected Result

Group A False

Group B True

Group C True

I have two price lists in workbook. One containing "normal" price list, other containing "action" prices.

I want to search for a product name code from column A in "normal" price list in column A of "action" list, and if it is found to show it somehow in any column in "normal" price list sheet.

This way I know that there is action price attached to that product and that I have to search for the price in "action" sheet.

Is there a formula or VB code like the =TYPE() function that will return whether a cell contains a FORMULA? Here's the issue:

I'm writing a macro to update 10,000 sheets. Each sheet has a column that I'm updating with a new formula. Some of these formulas have been previously overwritten with a random number that would delete the formula from the cell. I have to leave the overwritten values where there is no formula, and replace the values of the formulas where they are still intact. I assume that if I can identify whether there is a formula in the cell or not, I can choose that cell to skip or update.

I'm trying to determine if a rangeName is defined so that I can delete it without a programming error. I've used the idea that if I try to goto a non-existant rangeName, I'll get an error. I've tried to design a function that will return true or false if the rangeName is defined on the basis of that idea. Can you take a look at the code and see where I went wrong?

View 4 Replies View RelatedI have two price lists in workbook. One containing "normal" price list, other containing "action" prices.

I want to search for a product name code from column A in "normal" price list in column A of "action" list, and if it is found to show it somehow in any column in "normal" price list sheet.

This way I know that there is action price attached to that product and that I have to search for the price in "action" sheet.

Here's my formula:

=AND([@[Tenure (Yrs)]]>=5,[@[2016 Sales]]>=150000)

(Where should I enter high and low? Do I need an if formula nested into it?)

I'm trying to get it to read if the customer reads both criteria which is they've been there 5 years and over 150000 sales =

High if not Low.

I need to check one column to see if it is less than another one

If it is I need to have the IF function return specific criteria for true and then for false but then I also need it to rely on the results of another question from another column if the result of the first query is less than the figure in another column again I need to return specific criteria for tur and then for false

An AND function requires both to be true but when one isnt what do I write?

I have number data in columns F through AK. In column AL I want a formula that will look in columns F through AK from the left to right. Once it identifies a positive value I want the formula to identify if after that positive number there are any occurances where there are 6 0's in a row (anywhere up until column AK). The formula can return a True or False. I want to drag the formula down across many rows of data. If the entire row contains 0's, I do not want it identified as a TRUE

View 9 Replies View Relatedhow return a true/false based on a cell containing a string (text) vs a value?

I have a column where most cells are blank, some contain text, and others contain dates. I would like to select and manipulate only the ones that contain dates (or values).

I would like to create a qestionairre with checkboxes used to answer the question "Do you need____" (Check if yes). On the following workbook I would like a list of all items needed, and a list of items not needed on yet another workbook.

Is there a way to create these lists without having blanks for values that are not true? (and because Im sure there is HOW?)

First one: The thought process is that inbound inventory data is logged on one sheet; outbound inventory data logged on another within the same workbook. When specific data from the inbound sheet (LPN column) is 'shipped' and entered on the outbound sheet, that specific data needs to be verified against the order number it was intended to ship against and if everything lines up, to have a TRUE value returned, or FALSE if not.

Second one: same type of thing - I'd like to look for the same specific criteria (LPN) between the inbound and outbound worksheets and if the same LPN is found on the outbound sheet, to return a value of "SHIPPED".

Third and fourth - same deal again except this time, would like to tie back the outbound Destination and ship date data from the outbound worksheet to the inbound worksheet.

A copy of the workbook is attached for reference with cells that require formulas highlighted in yellow on the inbound sheet and data cells from which the formulas will verify data in green on the outbound sheet.

I have two lists, one that is 99,000 lines and the other is 150. I am trying to find out where the word(s) in the list of 150 is present in the list 99,000.

1st list of 99,000 is in Sheet1 A1-A99000 and the second list is in Sheet2 B1-B150.

The caveat is that in column A there is additional words in that cell so you can not do a simple vlookup, because there may or may not be an exact match.

I have been stuck for hours and the best i can get is to use the match function but it is not working because it is not exact. Last thing i want to do is use the CTRL F key to lookup all the words.

I am applying data validation in my workbook. The data in ColS consist of:

ColS

(Row2) X

(Row3) Y

(Row4) Y

(Row5) Y

(Row6) X

In ColT, I am to apply data validation: i.e. If in concerned row of ColS is having "X" value, then I am to show an error message. Else, values from A2:A5 should be shown in the as list and these should be accepted in ColT.

I'm trying to create a rec report, ideally on one page, for multiple criteria. The situation is we get a report on our trade positions (investment stuff) from an outside service we use. We also have a report internally from what we've booked. We're looking to tie out are basic things like price, original par, revised par, trade date, counter-party banks, etc. I've consolidated data from both sources on one page (DATA) where all data points are lined up (say EXTERNAL is from rows 1-500, and INTERNAL is 510-1010). Now I need to create a front page showing the result of each tie-out. The lookup value will be a combination of the fund name + trade ticket number which would almost guarantee a unique ID (fund name XYZ, ticket number 12345 = XYZ12345)

Current tabs on spreadsheet: DATA, EXTERNAL, INTERNAL. I need to add a REC page

Question: What formula can I use to check on each and return TRUE/FALSE? The goal is to have about 8 columns on the REC, each for one of the tie-outs (let's use price as an example.). I know the basic VLOOKUP to return one value, but it appears in this case I will need VLOOKUP to check two matching values based on unique ID XZY12345, compare the price, and return TRUE if they match, FALSE if they don't

Here's something I saw from one of our spreadsheets that I think does the same to confirm counter-party, though I have no idea how to read this lengthy formula.

=EXACT(VLOOKUP(IF(Q2="COMPANY",R2,Q2),FUNDS!$M$1:$N$400,2,FALSE),

INDEX(PENDING!$G$4:$G$3218,MATCH(CP!C2,PENDING!$N$4:$N$3218,0)))

I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.

I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3

I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.

Allows me to check like 10 different text values and return false for all of those in the conditional formatting rule. When those are not present, the conditional format is true thus applying the format.

I tried

=NOT(FIND("text1",$A$1,1))

It did not work because I believe this statement doesnt give the rule its TRUE value its looking for.

I am having trouble with this, to clarify I need the below...

Cell has conditional formatting checking for text1 text2 text3...text 10ish and if they are present nothing will happen and if they arent present then format the cell.

EDIT: to clarify, the code should look for either text1 or text2 or text3 so on...

Here's a simplified example:

ColA

ColB

ColC

Row1

A

Y

A

Row2

B

N

D

[Code] .........

I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.

The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.

I am trying to return a TRUE or FALSE based on a date in a cell.

for example:

if cell A1 = 07/11/2009

I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.

I have tried stuff like:

=IF(A1=TODAY()-14,"True","False")

but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?

Is there another formula that I could use that would return YES or NO instead of TRUE or FALSE? This is the formula that I am currently using.

=COUNTIF(BG_WADDRESS,D2)>1

I guess the answer for this is simple but can't find the answer.

AB1FALSE IF TRUE THAT A4 = TEST12TRUE IF TRUE THAT A4 = TEST23FALSE IF TRUE THAT A4 = TEST34TEST2IF ALL ARE FALSE = ""

Excel tables to the web >> Excel Jeanie HTML 4

In Column A I have the following values below.

Y

Yes

N

No

Questions how do you created a formula, Example If Cell A2 = Y or Yes Cell B2 will be 1, if not then 0.

Currently I was successful in writing this formula =IF(BB2="Y","1","0") but this formula only returns the value for Y, not Yes

I am using the following code in my Macro

Application.ScreenUpdating = False (I set it to "True" at the end of the sub)

But I can still see Excel changing tabs etc.

when you type True into a General formatted Excel cell Excel returns TRUE. This value cannot be formatted to a 1 (or a -1) by applying a different format. Thus, does Excel have a boolean data type? Or is it something else like a numeric value that for whatever reason is not receptive to format changes.

View 9 Replies View Related
Copyrights 2005-15 www.BigResource.com, All rights reserved