I'm trying to use the "clear contents macro" for merge cell, but I keep receiving this "compile error : Expected End Sub" error.
FYI, I have named my merge cells to "myMergedCells"
[Code] .....
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
Need the right direction to stop the error 'Compile Error Expected Function or Variable' appearing. I have both of the following codes in a module. The AddNewTenancy works perfectly but the EditTenancy comes up with the following error.
Both the Userforms exist so I know it's not that.
Sub EditTenancy()
EditTenancy.Show
End Sub
Sub AddNewTenancy()
NewTenancy.Show
End Sub
i'm trying to call a function from another one, i'm getting this error 'Compiler error: = expected' but i don't know the reason, the functions simply take some values an store them in an here is the
Dim productos(19, 3) As String
Sub agregarProducto(ByVal descripcion As String, ByVal modelo As String, _
ByVal precio As String, ByVal unidad As String)
Dim r As Integer
For r = 0 To 19
If productos(r, 0) = "" Then
productos(r, 0) = descripcion
productos(r, 1) = modelo
productos(r, 2) = precio
productos(r, 3) = unidad
End If
Next
End Sub
Sub agregarProductoTelas()
Dim descripcion, modelo, precio, unidad As String
If Selection.Column = 1 Then
descripcion = Selection. Offset(0, 0).Value
modelo = Selection.Offset(0, 0).Value
precio = Selection.Offset(0, 3).Value
unidad = Selection.Offset(0, 2).Value
agregarProducto(descripcion, modelo, precio, unidad) 'error happens right here
MsgBox (descripcion)...
I am getting this error and where th If not starts its is in red showing that is where the issue is:
HTML Code:
Sub RemoveRows()
Dim LR As Long, i As Long
Dim ws As Worksheet
Set ws = Worksheets("100 Airports")
LR = Range("B" & Rows.Count).End(xlUp).Row
For i = LR To 10 Step -1
[Code] .....
I have a VBA shell script that worked just fine on another computer, but now it won't run.
The code that won't execute is:
[Code] ........
I need to clear the contents of every other cell in a selection of 5000 rows starting with the first cell. Is there a macro that can do this for me?
View 3 Replies View RelatedI'm trying to create macro that will clear the contents of the cells in the 4 columns to the left of a cell that = 0 %, as well as the cell that = 0%. For example, if cell F13 = 0 % then the contents of B13:F13 would need to be cleared. The range in which data is being pasted into is B13:F27.
View 4 Replies View RelatedBeen racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
I'm trying to figure out code to have only the contents of cell 'a2' cleared when the contents of cell 'a1' is changed. The issue is that both cells are derived from lists and I don't want the formats cleared.
View 9 Replies View RelatedI need code for a macro that will find a min value in a particular column and based on that min value clear the contents of other cells for that min value.
For example, I have dates in column E such as:
200907
200906
200902
200809
200803
200710
200707
Therefore, I need to find all records for 200707 and clear the contents in other cells.
I can't hardcode the min date because that can change from month to month when new files are created. As can the number of rows.
I'm using Excel 2007.
I have a protected worksheet in which certain calculations are performed based on certain inputs.
For example, let's take Column E:
Starting in cell E4, I have cells in that column which are input cells and further down the column are calculated cells which are locked and whose formulas are hidden.
I was looking for a macro which would go down col E and clear contents of all unlocked cells without messing up any of the protected cells.
Also, there are certain cells in which I want to clear contents and some cells that I want the macro to insert a "0" value.
The input cells are non-contigous.
macro code to clear a spread sheet of all of its content? (The extent of the content can vary.)
View 2 Replies View RelatedI have a workbook that I re-use on a weekly basis. The header information must stay intact (Rows 1 and 2). I recorded a macro that would clear all tabs in the workbook, and that macro is:
Code:
Sheets("Sheet1").Select
Rows("3:1865").Select
Selection.Delete Shift:=xlUp
Range("A3").Select
Sheets("Sheet2").Select
Rows("3:1865").Select
Selection.Delete Shift:=xlUp
Range("A3").Select
Which made me curious if there was a VBA code to say "Clear Worksheet" as opposed to having to explicitly list the cells that need to be cleared?
I am trying to get a macro that will insert a line above whatever line the text "INSERTXYZ" is in. I'm getting that fine but I also want to clear the contents of cells "A:S" on whatever the new row number is.
Can anyone modify this piece to accomplish that? If you need to tear it completely down, I'm interested in simpler way as well.
Cells.Find(What:="INSERTXYZ", After:=ActiveCell).Select
ActiveCell.EntireRow.Select
Selection.EntireRow.Copy
Selection.EntireRow.Insert Shift:=xlDown
Selection.Interior.ColorIndex = xlNone
Application.CutCopyMode = False
ActiveCell.Select
Selection.Range("A:S").ClearContents
Im looking to ensure the sheet contents are clear before continuing with the macro routine. At the moment however, the macro runs I see the data flash up and then off. So it appears the data is being cleared as soon as it loads. Current code is:
View 2 Replies View RelatedBasically I want the macro to look through a column of values and if any cell in that column has the value 'LOCK' the macro would hardcode 'n' into the adjacent cell. Additionally, because the column in which the LOCK cells would appear is part of a vlookup, it returns #N/A which I would like my macro to ignore and then continue to evaluate the next cell all the way to the end of the column.
The code is the following:
Sub Hard_Code_Cells()
On Error Resume Next
lastrow = Cells.Find(What:="*", After:=Range("A1"), LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
[Code] .......
I've been receiving the error message 400 when I trigger the macro and I'm not sure how to correct my code to resolve the issue.
I am running into a Procedure too large error when running my macro. My macro is designed to replace a cell value with another cell value in a list. When the cell value is replaced a vlookup brings in new data to my workboook. Then the macro refreshes all the pivot tables and saves the workbork. I want my macro to repeat the above 60 times, so I have copied the code 60 times and changed the ActiveCell.FormulaR1C1 to point to the next value in my list. (Is there another way to select the next value from the list without changing the Row and Column number?) This is where my macro fails.
Below is my code.
VB:
Sheets("Data").Select
Range("B2").Select
[COLOR=#FF0000] ActiveCell.FormulaR1C1 = "=RC[25]" ' AGC GRP_ID[/COLOR]
Sheets("Ship pivot and cum triangle").Select
ActiveSheet.PivotTables("PivotTable4").RefreshTable
Application.DisplayAlerts = False
[Code] .....
I created three macros to work with reporting for my company.
One sorts a field, another deletes unwanted columns, and the third double checks columns for answers--I work for a telecom polling firm.
It was working last week on my computer, and it still works on another computer at the office. However, I keep getting an error message when I try to run it.
The message is "Compile Error: Expected Function or Variable". The code is below, and bolded where it breaks down.
--selection.Autofilter
[Code] .......
What could be the rationale for the sudden breakdown? I was testing it on a file that I have tested with before without issue. I also tried a second file, and even restarted my computer. I am currently trying to write a fourth macro for counting responses and giving percentages, so while I don't need to have the perfectly cleaned data to do so it would be nice to have.
I am creating some code to unprotect a workbook, unhide columns, delete a series of cells, rehide columns and then reprotect the workbook:
View 14 Replies View Relatedi'm trying to run a macro I recorded then amended to define a final row, but when I step in to the macro it says Compile Error - variable not defined. Please can someone help, surely I am defining it so I don't know why it doesn't work? Is there anything wrong with my FinalRow line in this macro?
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 21/06/2009 by Richard Shaffer
'
'
Sheets("Core Finance").Select
FinalRow = Cells(65536, 1).End(xlUp).Row
Range("A3:O" & FinalRow).Copy
Sheets("Sheet1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Range("A1").Select
End Sub
I have the following code where I want to clear the cells.
Code:
Workbooks(strOutputFileName).Sheets(2).Activate
Range("F9:F25,C27:E57,F59:F60,J9:J25,G27:I57,J59:J60,N9:N25,K27:M57,N59:N60,R9:R25,O27:Q57,R59:R60").Select
Selection.ClearContents
When I run this code, where it should select G27:I57, it instead selects G27:N57!!!!
When I manually try to select the G27:I57, the selection jumps to the right to N57.
When I use this piece of code on a different worksheet, it works OK!
Is it possible using vba code to clear a specific cell's contents? I have a workbook that has text boxes that need the linked cell cleared when the workbook opens so the user can start fresh with empty text box's.
View 6 Replies View RelatedI'm trying to use the macro below (twice but with different variables) but everytime I get the error "Compile error: Constant expression required".
[Code]....
I'm trying to use MATCH to identify the Column number that contains "DL_Error", then I'll use this Column # to select a cell (found Column # & "34"), but I get the error shown in the title of this post.
Here's my current
Sub Macro15()
' Macro recorded 6/18/2009 by me
Range(Match("DL_ERROR", "A31:CW31", 0) & "34").Select
End Sub
I have recorded a simple macro ( copying a cell, and then pasting the formula into various others), and I get the following error
Compile Error: Argument Not Optional
I have highlighted where the error first happens
Sub Macro3()
'
' Macro3 Macro
' Macro recorded 24/08/2007 by Michael Traynor
'
'
Range("K7:K8").Select
Selection.Copy
Range("K167:AJ168").Select
Range("AJ167").Activate
Range("K167:AJ168,K175:AJ176").Select
Range("AJ175").Activate
Range("K167:AJ168,K175:AJ176,K183:AJ184").Select
Range("AJ183").Activate
Range("K167:AJ168,K175:AJ176,K183:AJ184,K191:AJ192").Select
As I've said I didn't write this, it was recorded from Excel.
I have a spreadsheet with data to row 5000. I have column Y that has an "X" in it. I would like some VBA code to look at each row up to 5000, in column Y for the "X". If it is there, clear the cell contents on the current row in columns T, U, and V.
I've tried modifying some existing code (excluding the Y column range of 5000) but keep getting a "Compile error: Wrong number of arguments or invalid property assignments". How do I set the 5000 limit and get this code back on track?
Sub RemoveBankDelay()
n = WorksheetFunction.CountIf(Range("Y:Y"), "X")
For i = 1 To n
[Code]....
