Compile Error (Constant Expression Required) When Using Macro Twice
Apr 1, 2014I'm trying to use the macro below (twice but with different variables) but everytime I get the error "Compile error: Constant expression required".
[Code]....
ADVERTISEMENT
Error / Constant Expression Required
Jan 22, 2013I am getting 'Constant Expression Required' and this line of code highlighted.
Code:
Const sFile As String = ThisWorkbook.Path & "Survey.xlsm"
Compile Error: Object Required ()
Dec 4, 2007I found this code in the Mr. Excel archives. It is designed to add a sequential number to a cell if the cell next to it contains text and then stop as soon as it encounters a blank. Problem is that I keep getting a Compile Error: Object Required on the Set nos line. I tried using a qualifier and also expirimented with CreatObject but still received the error.
Sub AddNos()
Set nos = Range("B1", Range("B1").End(xlDown)).Offset(0,-1)
nos.Resize(1,1).Value = 1
nos.Resize(1,1).AutoFill nos, xlFillSeries
nos.NumberFormat = "General""."""
End Sub
Vba Macro Error: Compile Error Named Argument Not Found
Apr 26, 2006I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
Compile Error Syntax Error In Macro
May 17, 2014VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
Macro: Compile Error - Syntax Error
Feb 1, 2010"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
VBA Macro Throwing Compile Error
Dec 3, 2013Basically I want the macro to look through a column of values and if any cell in that column has the value 'LOCK' the macro would hardcode 'n' into the adjacent cell. Additionally, because the column in which the LOCK cells would appear is part of a vlookup, it returns #N/A which I would like my macro to ignore and then continue to evaluate the next cell all the way to the end of the column.
The code is the following:
Sub Hard_Code_Cells()
On Error Resume Next
lastrow = Cells.Find(What:="*", After:=Range("A1"), LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
[Code] .......
I've been receiving the error message 400 when I trigger the macro and I'm not sure how to correct my code to resolve the issue.
Compile Error Procedure Too Large When Trying To Run Macro
May 29, 2013I am running into a Procedure too large error when running my macro. My macro is designed to replace a cell value with another cell value in a list. When the cell value is replaced a vlookup brings in new data to my workboook. Then the macro refreshes all the pivot tables and saves the workbork. I want my macro to repeat the above 60 times, so I have copied the code 60 times and changed the ActiveCell.FormulaR1C1 to point to the next value in my list. (Is there another way to select the next value from the list without changing the Row and Column number?) This is where my macro fails.
Below is my code.
VB:
Sheets("Data").Select
Range("B2").Select
[COLOR=#FF0000] ActiveCell.FormulaR1C1 = "=RC[25]" ' AGC GRP_ID[/COLOR]
Sheets("Ship pivot and cum triangle").Select
ActiveSheet.PivotTables("PivotTable4").RefreshTable
Application.DisplayAlerts = False
[Code] .....
Macro No Longer Works - Getting Compile Error?
Jul 30, 2014 I created three macros to work with reporting for my company.
One sorts a field, another deletes unwanted columns, and the third double checks columns for answers--I work for a telecom polling firm.
It was working last week on my computer, and it still works on another computer at the office. However, I keep getting an error message when I try to run it.
The message is "Compile Error: Expected Function or Variable". The code is below, and bolded where it breaks down.
--selection.Autofilter
[Code] .......
What could be the rationale for the sudden breakdown? I was testing it on a file that I have tested with before without issue. I also tried a second file, and even restarted my computer. I am currently trying to write a fourth macro for counting responses and giving percentages, so while I don't need to have the perfectly cleaned data to do so it would be nice to have.
Delete Cells Macro Compile Error
Feb 11, 2010I am creating some code to unprotect a workbook, unhide columns, delete a series of cells, rehide columns and then reprotect the workbook:
View 14 Replies View RelatedMacro - Compile Error When Define FinalRow
Jun 21, 2009i'm trying to run a macro I recorded then amended to define a final row, but when I step in to the macro it says Compile Error - variable not defined. Please can someone help, surely I am defining it so I don't know why it doesn't work? Is there anything wrong with my FinalRow line in this macro?
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 21/06/2009 by Richard Shaffer
'
'
Sheets("Core Finance").Select
FinalRow = Cells(65536, 1).End(xlUp).Row
Range("A3:O" & FinalRow).Copy
Sheets("Sheet1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.PasteSpecial Paste:=xlPasteFormats, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Range("A1").Select
End Sub
Object Required Error When Running Macro
Apr 28, 2010I am trying to run the following macro to copy a data range(A1:HX1) range from one sheet(sheet 6) and past it into the next available blank row in another sheet called New_Overall_Input_File but get the following error when I try and run it......."Object Required"?
Sub ALLCARS()
Sheet6.Range("A1:HX1").Copy
New_Overall_Input_File.Range("D" & Rows.Count).Offset(1, 0).PasteSpecial xlPasteValues
Application.CutCopyMode = False
End Sub
Compile Error: Sub Or Function Not Defined - 3-line Macro
Jun 18, 2009I'm trying to use MATCH to identify the Column number that contains "DL_Error", then I'll use this Column # to select a cell (found Column # & "34"), but I get the error shown in the title of this post.
Here's my current
Sub Macro15()
' Macro recorded 6/18/2009 by me
Range(Match("DL_ERROR", "A31:CW31", 0) & "34").Select
End Sub
Macro Recorder :: Compile Error: Argument Not Optional
Aug 24, 2007I have recorded a simple macro ( copying a cell, and then pasting the formula into various others), and I get the following error
Compile Error: Argument Not Optional
I have highlighted where the error first happens
Sub Macro3()
'
' Macro3 Macro
' Macro recorded 24/08/2007 by Michael Traynor
'
'
Range("K7:K8").Select
Selection.Copy
Range("K167:AJ168").Select
Range("AJ167").Activate
Range("K167:AJ168,K175:AJ176").Select
Range("AJ175").Activate
Range("K167:AJ168,K175:AJ176,K183:AJ184").Select
Range("AJ183").Activate
Range("K167:AJ168,K175:AJ176,K183:AJ184,K191:AJ192").Select
As I've said I didn't write this, it was recorded from Excel.
Clear Contents Macro For Merge Cell (Compile Error - Expected End Sub)
Jun 13, 2014I'm trying to use the "clear contents macro" for merge cell, but I keep receiving this "compile error : Expected End Sub" error.
FYI, I have named my merge cells to "myMergedCells"
[Code] .....
Compile Error: Invalid Outside Procedure (execute Macro On Pivot Refresh)
Jan 27, 2009I keep getting this error:
"Compile Error: Invalid outside procedure"
What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.
Time Error '16' Expression Too Complex Run
Dec 7, 2009Using Excel 2007 the below code causes Run Time Error '16', Expression too complex.
It works fine in Excel 97, 2000 and 2003.
why this would now cause an error?
My search on google only refers to this error in relation to charts.
VLOOKUP Gives Error With False Expression
Mar 1, 2010I have a formula that has been working and it looks like this
=VLOOKUP(A13;'IFS export'!$A$1:$F$19000;4;FALSE)
Now I want to use the same formula in an other workbook and it gives an error
=VLOOKUP(A2;DRAWING!$A$2:$C$9168;3;FALSE)
When I type this formula I get the window that says
"This formula contains an error.
*For information about fixing common formula problems, press help.
*...........
*..........."
And if I go and try to change the first formula that has been work it gives me the same error.
Macro That Prompts To Chose Files And Copies Them Based On Criteria - Error 424 / Object Required
Mar 6, 2013I have written a macro that prompts the user to chose some files and if they meet certain criteria, it copies them to a specified folder.However, I have run into this 424 error "Object required".
Code:
Sub FILES2SFTP()
Dim FileNames As Variant
Dim I As Integer
Dim fso As Variant
Dim Data As String
ChDrive "G:"
ChDir "G:TEST"
[code]....
The error is in this line:
If fso.getfilename(FileNames(I).Name) = ("Name1" & Data & ".xls" Or "Name2" & Data & ".xls") Then
Copy And Paste Special Values But Getting Error 'Compile Error - Expected Function Or Variable'
Feb 7, 2007I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
Error Message (Compile Error, Procedure Too Large)
May 20, 2009I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View RelatedConstant Variables - Declare Name In Separate UserForm As Constant
May 8, 2012I have a userForm (Form1) that contains a persons name that I would like to reference in a separate UserForm (Form2). In the separate UserForm (Form2) I need to reference this persons name many times, so I was wondering if there was a was to declare this name in the separate UserForm (Form2) as a constant. Only thing is that a constant, to the best of my knowledge, must be an expression and not a variable. Mainly, I'm trying to avoid declaring the myName variable in each Sub within Form2, which it will be needed for a ton of Sub's.
Code for Form2: Const myName As String = Form1.txtName.Value
Compile Error ...
May 4, 2008Can some see why this Code would fail intermittently?
This gets executed after a Commandbutton is selected.
The Error Message is attached.
Compile Error: For Without Next ..
Sep 14, 2009I am using the following code to put a combo box in my userform. When I try to run it I get the following Compile Error: For without next. What does it mean and how do I fix it?
View 9 Replies View RelatedCompile Error: For Without Next
May 2, 2008just make some files to make my work easier. Few too many watching the game last night, and I think im lost here. Am I attempting to do too much here ? I ran the first For statement Fine, but I cant get the second to work. I dont understand where my next statement should be entered.
View 4 Replies View RelatedCompile Error: Loop Without Do
Jul 20, 2009VBA but familiar with other programming languages.
I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.
The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.
Unable To Get Rid Of Compile Error In VBA
May 11, 2014I am new to VBA. I have been getting compile error on the below code:
Public Sub hourCalculation()
Dim rcount As Integer
Dim rindex As Integer
Dim logintime As Date
Dim logoutime As Date
[Code] ..........
Compile Error - Annying Pop Up
Jun 11, 2008Every time I wrote something wrong I stupid and annoying pop windows appears and I have to press ok different times and be quick to correct the problem, otherwise it appears again.
Error '424' Object Required
Jul 28, 2007Sub Macro2()
'
' Macro2 Macro
' Macro recorded 7/28/2007 by i8ig
'
If Target.Column = 1 Then
If Target.Value = "Med" Then
Rows(Target.Row).Interior.ColorIndex = 4
Range("H3").Select
ActiveCell.FormulaR1C1 = "=IF(RC[3]="""","""",RC[3]-3)"
Else
If Target.Value = "Tasc" Then
Rows("4:4").Interior.ColorIndex = 44
Range("H4").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
Else
If Target.Range = "NBAR" Then
Range("J5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-5)"
Range("I5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
Range("H5").Select
ActiveCell.FormulaR1C1 = "=IF(RC[1]="""","""",RC[1]-2)"
End If
End If
End If
End If
End Sub
I continue to receive an error '424' object required and I cant find it
Error Object Required
Nov 3, 2009I have two worksheets one called "invoice" and one called "tenants"
"Invoice" has a userform where I want to enter a tenancy number and then lookup the tenants name and address from "tenants"
I have put the following macro in
Sub lookup()
Dim res As Variant
res = Application.VLookup("A1", Tenants.xlsx("Sheet1"), "$A:$H", 2, False)
If IsError(res) Then
MsgBox "not found"
Else
MsgBox "found at pos: " & res
End If
End Sub
but get the following error - "object required"