I want to delete the contents of every cell without deleting any code from my module. The reason I ask is, I'm reading from a text file into excel.
I want to run my code to read text into excel one time through. Then i want to delete all the text, make some alterations to my code, and run the code again. That way each time the worksheet is fresh and clear before i run the code.
I have a workbook which I regularly upload that cannot have macros within it; however, to update and process the data, I must utilize VBA Code.
I tried to work around this by storing my macros in a module in another workbook. My process is to have the VBA Code Module from the other workbook open and have the active workbook be the one I want to change, then I run the VBA Code from the other workbook.
This used to work. However, I am recently getting problems with the Code not running correctly. Sometimes it only runs the code if the affected cells are not hidden; other times it will not run the code at all!
I have a list of workbooks on a sheet that i am trying to open with vba one by one. If a workbook in my list does not exist or was deleted then excel displays a runtime error. Is there a way to bypass this error and have the code skip the non existant workbook and open the next one?
I have this code that I have had for a while.. it works okay on my computer and does as intended... it deleted all empty rows in the selected range after checking to see if any cells contain anything that makes it look blank but isn't (it cleans those cells).
So on my computer it works... on a coworkers computer it converts every used cell in the usedrange to #VALUE...
I've got some code in workbook A that reformats another workbook B. Basically, it moves all the sheets across to A, creates a pivot table and chart, then saves itself as a variant of the original filename B. The last things it does is to delete the one sheet that was originally in A, and then delete the module that the code is running from (using some code from Chip Pearson):
The fact that a module can delete itself blows my mind - but there are a couple of things I'm not sure about:
1. Presumably anything that's in my sub after the delete module line won't get executed?
2. If the saved-as workbook (Bvariant) is closed without saving, the module is still there when it is reopened. Is there a way to prevent this without putting new code into Bvariant?
I have a module (a) that calls another module (b) to delete module (a). I don't think i can delete module (a) while it's still running. How do i get module (b) to stop module (a) ?
I have some buttons in different sheets in an excel file, each button has its own code, that is the reason I can not move the code related to each object to another location (sheet or module).
And I have one piece of code in Module1 (Auto_load) in order to execute automatically this routine every time file is opened. Inside "auto_load" routine I initialize some values of some check buttons,options buttons and positions of some objects in diferent sheets, but I can not pass the value of variables between Module and Sheet's code even when I declare as public variables and/or function.
I defined function ConcatenateIf() in Module 1, that would take a range and combine the cell contents:
Function ConcatenateIf(iRange As Range, iLook As String, iNum As Integer) For Each cell In iRange If cell.Value iLook Then ConcatenateIf = ConcatenateIf & Chr$(10) & cell.Offset(0, iNum).Value End If Next cell End Function
Works beautifully. Then I save, and close. When I re-open, all the cells that reference this function display #NAME? error, like it can't find the ConcatenateIf() function. Does this have something to do with macro security? If so, why would it work at first, and then stop working?
I was wondering if anyone knows how to fix this. I've sent out a worksheet with macros that call up userforms but when someone runs the form and tries to call up some userforms they get this error.
I get the error message "Compile Error In Hidden Module: Thisworkbook" every time i start excel 2007. I've only installed it recently and only settings I have changed in excel is install the add-ins solver and data analysis. I've also had Nitro PDF 5 Pro installed before Office 2007 was installed. I have recently uninstalled Nitro PDF5.
I'm not a coder and so I havent messed around with marcos etc. How do I get rid of this issue in excel 2007?
I have a workbook that contains a form that requires the user to enter a valid username and password to open the workbook. On my laptop it runs perfectly. On my desktop I have issues. When I launch the workbook on my desktop, I get the userform login as I am supposed to. Once I enter the login info I get the following error:
"Compile error in hidden module: UserForm1"
My desktop operating system is as follows:
Windows XP Professional Version 2002 Service Pack 2
And I am running the following version of Excel:
Microsoft Excel 2003 (11.8105.8107) SP2 Part of Microsoft Office Professional Edition 2003
Once again, it seems to work perfectly on every PC except for mine. I need to be sure I have no compatability issues. Please help. I can post the code if need be.
I have a problem i have written an excel macro in VBA and it is working on some computer but on the others it is not working. It says "compile error in hidden module"
I have implemented the code for the FuzzyPercent code as a module and Excel will not recognize the function for the cell (=fuzzypercent($C$3,$B5,D$2)). I am using Excel XP.
When I open attached excel file excel show message that," Compile error in hidden module in sheet 1". and file stop working. this error occur in only in Pc. How I remove this error.
I have made a macro that displays a textbox containing the contents of a cell once the cell is clicked. The macro is written in the 'ThisWorkbook' module in the Sub 'Worksheet_SelectionChange'.
Now I want to convert this macro into an add-in so that it works on all the Excel workbooks I open. Is it possible to do this? Or is there a way in which we can automatically put the code in the 'ThisWorkbook' module of any open worksheet (doesn't seem feasible).
I am trying to add code to a module that is already working. however when trying to add new code i keep on getting error messages. It doesnt like the "next i" see attachment.
all else works except for the WEEK1 tab. I am trying to get it so if the "Date Submitted" colum on the MAIN tab is between 5/3/09 - 5/9/09 it will go to tab "WEEK1"
5/10/09 - 5/16/09 to WEEK2 5/17/09 - 5/23/09 to WEEK3 5/24/09 - 5/30/09 to WEEK4
I have a workbook that imports sheets from other workbooks. Each of these sheets need to have the following in the sheet module...
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If ActiveCell.Address = "$P$1" Then Range("P11:V250,Q10:V10").Select Selection.Clear Range("P10").Select End If End Sub
How do I accomplish that through a module in the original workbook?
I am looking for a code to create a new vba module. then cope all the code from 1 vba module(without empty line) to the newly created module. then delete the old vba module. does such a code exist?
I have a spreadsheet with two modules. In an effort to reduce the file size of an archive, I’d like to remove some of the code (i.e., Module1). I have a macro that attempts to do this.
There are three parts to the operation. The first removes Module1; the second Quits the application; the third saves the changes. If I run each of these operations separately, it works fine. However, I’d like to do this with only one macro (SKK4). For some reason, it does not remove the Module. Here is my test Sub skk1() ThisWorkbook.VBProject.VBComponents.Remove_ ThisWorkbook.VBProject.VBComponents("Module1") End Sub
Sub skk2() Application.Quit End Sub
Sub skk3() ThisWorkbook.Close SaveChanges:=True End Sub
Somehow, from a fresh instal of Excel (to try and cure the same problem), and Insert Module, the box is green. Viewing a macro, the background is green, some of the code is black on green, but most is black or blue in white boxes cut out of the green. The code appears normal on another computer.
I have a problem deleting Module1 then saving the worksheet and keeping the module1 deleted. Without the rem'd code (shown below) a popup asks if you wish to save the changes; if you say "No" the module reappears in the file, and "Yes" the module stays deleted. Even with any of the Rem'd out code below the workbook is saved and closed, but on reopening the code module is still there. My problem is I don't want the user to have the choice, the workbook must be saved without the module. As this is a price quote program, with the module still in the Project, reopening and closing the saved workbook causes an error as the macro cannot find the deleted worksheets to delete! This is a very small test program for a much bigger one that has quite a bit of security in it.
Sub deletetest()
Dim x As Object Application.DisplayAlerts = False
Sheets("Sheet2").Delete Sheets("Sheet3").Delete
e = Sheets("Sheet1"). Range("B4") ' account name f = Format(Sheets("Sheet1").Range("B3"), "ddmmyy") ' date quote saved, cell = NOW() thisfile = e & "-" & "-" & f 'changed to name, Acc No, dat
i am running a macro thru vba (beiing called from a ms access module) and am getting a RuntTimeError 1004.
the code opens a workbook...then open a second workbook (which houses the macro) then activates the desired worksheet and call the Maco via the run command but errors out.
if i open the workbook and set focus on the desired sheet ....tool>macro>desired macro name it runs fine.
the line of code in the macro is: "ActiveCell.Offset(1, 0).Activate"
I have a vba process that develops statistics/graphical output via SQL queries of pretty large datasets. This usually takes about 2min, so I run it via a form I've build, and then go do other work or play on the net, checking and rechecking if it has completed. I do have a msgbox once the process is complete, but if i am not actively in an Excel window, I will not see it. Is there a way to force the windows taskbar to flash or something so i can see that my process is complete if i am not in an Excel window?
I am trying to create code that I can use to to update a macro module automatically so I don;t have to keep having my users manually import when we have update to the module.
Here is the code I have so far.
Private Sub Workbook_Open() Call UpdateTJMacros 'This is in the module we are replacing Call MyOpenWorkbookMacro
how to write a procedure to delete macro code that is in the worksheet property? I created a and excel model for a colleague which had many macro procedures including "Worksheet_Activate". The problem is now this individual moves the worksheets into new workbooks and this is cause many runtime errors. Is there a way I can write a copy/move procedure that also deletes the Worksheet Activate macro so that error does not appear?
way to save user-settings at runtime, preferably in the same or another module. For example: how can I save a bundle of variables such that the next time excel is started and the workbook is opened, the user can continue to work with his personal settings?
Background: Using the macro, I am writing on atm, a user will be able to adjust the macro according to his input-samples. Here the columns and rows of an input can be varied to fit the macros requirements. It would be great if those settings could be stored, irrespectively of where the file currently resides. That is, best it would be, if the source-code itself could be changed ... maybe by adding another module?
