Compile Error In Hidden Module In Sheet 1 In Excel
Dec 31, 2012
When I open attached excel file excel show message that," Compile error in hidden module in sheet 1". and file stop working. this error occur in only in Pc. How I remove this error.
I was wondering if anyone knows how to fix this. I've sent out a worksheet with macros that call up userforms but when someone runs the form and tries to call up some userforms they get this error.
I get the error message "Compile Error In Hidden Module: Thisworkbook" every time i start excel 2007. I've only installed it recently and only settings I have changed in excel is install the add-ins solver and data analysis. I've also had Nitro PDF 5 Pro installed before Office 2007 was installed. I have recently uninstalled Nitro PDF5.
I'm not a coder and so I havent messed around with marcos etc. How do I get rid of this issue in excel 2007?
I have a workbook that contains a form that requires the user to enter a valid username and password to open the workbook. On my laptop it runs perfectly. On my desktop I have issues. When I launch the workbook on my desktop, I get the userform login as I am supposed to. Once I enter the login info I get the following error:
"Compile error in hidden module: UserForm1"
My desktop operating system is as follows:
Windows XP Professional Version 2002 Service Pack 2
And I am running the following version of Excel:
Microsoft Excel 2003 (11.8105.8107) SP2 Part of Microsoft Office Professional Edition 2003
Once again, it seems to work perfectly on every PC except for mine. I need to be sure I have no compatability issues. Please help. I can post the code if need be.
I have a problem i have written an excel macro in VBA and it is working on some computer but on the others it is not working. It says "compile error in hidden module"
I've written some VB code in Excel 2003 which hides and unhides worksheets dependant upon 'Yes' or 'No' in a named range. This works Ok in Excel 2003, however if I try and use it in Excel 2007 it shows error 'Compile Error in Hidden Sheet'. When I debug it the error 'Compile Error - Method or Data Member Not Found' appears. The code in question is as follows:
I'm trying to tweak this code from a previous form I created but I'm getting a compile error message. On my old form...the first box was a combo list box where the person entering data would select a value. On the new form, its a text box where the person will enter the value. I thought I could just change the me.cbo[name].listindex to me.tbo[name].listindex - but that seems to be causing the issue. I'm not sure what I would put after the me.tbo[name]. to get the code to run...
Code:
Private Sub cmdAdd_Click()Dim lRow As LongDim lPart As LongDim ws As WorksheetSet ws = Worksheets("DataNEW")'find first empty row in databaselRow = ws.Cells(Rows.Count, 1) _ .End(xlUp).Offset(1, 0).RowlPart = Me.tboProdCode.ListIndex
I get this error : Compile error : Sub or Function not defined. I found out that this might be caused by the solver not being referenced. But, this is fixed now but I still get the same error message.
I'm using Excel 2007 - Windows.
Here is the code :
Sub Macro1() Dim i As Integer Dim j As Integer j = 4 For i = 1 To 4000 If ActiveSheet.Cell(i, 12).Value = 1 Then ActiveSheet.Cell(j, 15).Value = ActiveSheet.Cell(i, 2)
I am currently working with a hidden sheetname "hide_template" which contains formula linking to another sheetname "rawdata" of same workbook.
In this "rawdata", the contents is updated from time to time.
The problem is when I open this workbook and update the entries in "rawdata", the formulas/results in "hide_template" is not updated and invalid (ie. #N/A, #VALUE..)
This is the overview of process that Im working with:
===> open workbook ===> paste new entries on "rawdata" ==> run a macro to copy range in the "hidden_template" to paste to new sheet of same workbook
I already have a working macro to copy range from the "hidden_template" which works as follows:
===> set to visible the "hidden_template" ===> copy range from "hidden_template" ===> paste to new sheet ===> set to hidden the "hidden_template"
I am using this code (below) to hide certain rows or columns depending on what number is entered. Everything is working fine and I am at the point where I would like to share this excel sheet with others but I would like to lock certain cells so that others cannot alter the formulas. As soon as I lock the cells and then enter values into the unlocked cells, I get the "run-time error '1004': Unable to set the Hidden property of the Range class".
I am using excel 2010 x64.
Code: Private Sub Worksheet_Change(ByVal Target As Range)If Not Intersect(Target, Range("B3")) Is Nothing Then If Range("B3").Value = 0 Then Columns("G:P").EntireColumn.Hidden = True Else If Range("B3").Value = 1 Then Columns("H:P").EntireColumn.Hidden = True
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application ' ' do nothing for now 'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
It’s been working perfectly up until around an hour ago. However, now when I close Excel, I get compile errors.
These compile errors seem to be because Excel is trying to access controls in the workbook after it has closed. Since the workbook is closed, VBA can no longer ‘see’ the controls, and therefore it thows up errors.
I’m also getting a similar error on a Worksheets("DataExplorer").unprotect line, which seems to be because the worksheet isn’t there after closing.
These errors only occur when I close the whole excel application using the big cross in the top right. If I just close the workbook (using the smaller cross just below the big cross in the top right of excel), it doesn’t throw up these errors.
Just to clarify: all of the code runs perfectly when Excel is open. The errors are being thrown up for lines of code which run without problem until Excel is closed.
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6() Cells.Select selection.Copy selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
For which I get 'Compile Error - Expected Function or Variable'
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR: NAMED ARGUMENT NOT FOUND
Sub HPVAL() Dim r As Range, myStr As String myStr = "HP" Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _ :=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ False, SearchFormat:=False) If Not r Is Nothing Then r = r.Value While Not r Is Nothing Set r = Cells.FindNext(r) If Not r Is Nothing Then r = r.Value End If Wend End If End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
Basically my code is bombing at the red highlighted code. Error: "Run-time error '1004': Copy method of Worksheet class failed"
Sheet "Blank Form" is a hidden sheet. Can I alter the red section of code to work while being a hidden sheet? I tried a few variations but nothing seems to work..
I am using the following code to put a combo box in my userform. When I try to run it I get the following Compile Error: For without next. What does it mean and how do I fix it?
just make some files to make my work easier. Few too many watching the game last night, and I think im lost here. Am I attempting to do too much here ? I ran the first For statement Fine, but I cant get the second to work. I dont understand where my next statement should be entered.
VBA but familiar with other programming languages.
I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.
The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.
Every time I wrote something wrong I stupid and annoying pop windows appears and I have to press ok different times and be quick to correct the problem, otherwise it appears again.