I have an Excel sheet with a few thousand rows which I would like to filter by a column with the name TrackingID. This column contains values like:
12AA1
23452BA2
234AA1
345635CA2
...
I would like to filter this column by the third character from the end (which is always a letter from the range [A-Z]). In the example above, this would be:
A
B
A
C...................
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
I'm trying to automate advanced filter but can't get past having just 1 critreria.
I have attached an example spreadsheet where the download dump is on "Data" sheet and the result of the advanced filter is on the "Result" page. I would like, if possible, for the result to come up every time the criteria is put in (they are all data validation lists).
so for example, if i select account code, all those codes come up then select period and the list dwindles down and again for cost centre. Is it possible to do this without using macros. I have found the following code butnot sure what to do with it (sorry).
This is quite a easy one. I am a begineer so I don't know how to do it. I keep getting a runtime error. I want create a macro that does the following. I have this data(it is made up).
NameSchoolFee
JohnFDU700
MarkeyNYIT400
NickNJIT500
SamBU100
I want it to autofilter school njit
NickNJIT500...........
What would be the code for this? I want use the code for bigger data?. Also if you have a file which is 100 lines long and your macro does a series of steps for that file. Then you have another file and you want the same steps done but it is 500 lines long. How would you write a macro thatrun the steps taking in the last line and not just a 100 lines.
I have a worksheet with 6000 rows (W1), and another with 2500 rows (W2).
I need to check whether the values of W2 are found in the second column of W1. As in if(iserror(search(valuex,worksheet2!B2)),"",A2) ---> resulting in something like:
If the value is found in the cell B2 of column B on W1, then return its reference which you find in A2, otherwise leave a blank.
I need to check all 2500 values in all 6000 rows.
I know for sure that I will have limited hits (max of 200) so I would like to create a list on W2 (the values) where I check if they are found in W1 and return only the 'hits'. I would like to filter out the blanks.
YOu can filter the blanks, I know, but you need to have a 'full' version (I thought) with all the blanks and the hits and then and only then you can filter.
But is there a way how I can use the advanced filter, with a criteria range using a function. Something like: criteria range --> if(iserror(search(valuex,worksheet2!B2)),"",A2) is not equal to "".
the macro mentioned below has been assigned to a combo-box form. I have 2 different datasets in the same sheet, they have the same headers (but named differently, myhead and myhead1) and the same adv filter criteria range (named as "dcrit") is applicable to both datasets. So, if an item is selected from the combo-box, both the datasets should get filtered according to same criteria. how i can combine the 2 IF LOOPS mentioned in the code?
Sub myfilt()
Application. ScreenUpdating = False
If ActiveSheet.FilterMode Then ActiveSheet.ShowAllData
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead"), Range("myhead").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead1"), Range("myhead1").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
Can anyone explain why the unique filter does not produce a unique result - sample attached?
View 2 Replies View RelatedHow do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
1- Force cell format date to by (yyyy/mm/dd) only, with worng msgbox( validation).
2- Make the first day of a month in a color cell
I've Tried this In Conditional Formating (=VALUE(right(A1;2))=1) but didn't work
3-Make Advanced Filter to filter data between two dates .
In an excel sheet, I am using a macro to filter. Macro code is as follows. When I run this macro, it returns 4 rows matching the criteria from 560 rows in the excel sheet.
VB:
ActiveSheet.Range("$A$1:$I$566").AutoFilter Field:=1, Criteria1:= _
">=11/11/2012 22:13", Operator:=xlAnd, Criteria2:="<=11/12/2012 6:47"
I want to use the same criteria in the vb.net code, to do same thru vb.net. But, when I run the same code in vb.net, it just returns only 1 row (1st row only).
VB:
[FONT=Consolas][SIZE=2][COLOR=#0000ff]xlsRange1.AutoFilter(Field:=1, Criteria1:=">=11/11/2012 22:13", Operator:=Excel.XlAutoFilterOperator.xlAnd, Criteria1:="<=11/12/2012 6:47")
This returns 1 instead of 4 expected.
I have a large Excel with details of 1,000 staff
Column J1 is called: Resource Name which has 1,000+ staff other columns have corresponding Hours, Project names etc
I want an advanced filter where I select COLUMN J:J and filter this whole sheet based on say 25 names (in the format they're in) e.g
Frank, James
Wilkonson, Paul,
etc
In the Advanced Filter, Ive selected J:J as LIST RANGE, but how do I input an OR statement in the Criteria, as above i.e where name is Frank, James OR Wilksonson, Paul OR
Alternatively, I have the list of the 25 names in Sheet 2, can the Advanced Filter do a VLOOKUP then filter entire Sheet based on the names provided?
I have a condition in advanced filtering as >90%. However, I would like the "90%" to be calculated via a formula in another cell and this condition to reference it. Is it possible?
View 8 Replies View RelatedI have a file that has a column of dates. I would like to use advanced
filter to filter anything with a date that is <today()-1 but I can't seem to
make the fomula work. I can make it filter on =today()-1 but when I use the
< it doesn't calculate today's date and gives me nothing.
Basically I have set up a list on sheet1, this is now on a drop down in sheet2 and my raw data in sheet3.
I want the table in sheet2 to just display the product items I select in the dropdown but it is displaying all the raw data (although is updating when I update the raw data)
Granted I copied the code whilst researching but I'm just not quite there.
Could someone possibly look at the attached and let me know where I am going wrong. Also as you can tell I am very new to teh VB application in Excel, could anyone reccommend a good place to start learning the very basics?
why the Advanced Filter works in the macro but not in the UDF?
Code:
Public Function strUniqueVal(rng As Range) 'rng variable must include sheet name
Dim c As Range
rng.AdvancedFilter Action:=xlFilterInPlace, Unique:=True
[Code]....
Having big problems getting an advanced filter macro to work on-going (meaning again and again and again once I update the table it filters from).
Macro is as follows:
Range("A1:O1").Select
Range("A3:O65536").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"H1:H2"), CopyToRange:=Range("T1:AH65536"), Unique:=False
Range("A3:O65536").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range( _
"G1:G2"), CopyToRange:=Range("AM1:BA65536"), Unique:=False
Do I need to specify the sheet that this filter should occur on? If so could someone indicate how I would get that into the macro?
I have a worksheet that conatins multiple columns that are populated from a sql query.One column is a parts list.This has 1705 rows.
I have another worksheet that contains a list of parts in one column.This list is varying in row length.
I want to be able to produce a list that only contains matching data , including () around parts and if not too difficult an indication of data that is not in first list but is in second list.
When I do an advanced filter using the second list as the criteria i am not recieving all of the data from the filter , ie in the first list there is parts in (1234XYZ ) but in the second list the part is 1234XYZ , this part is not being resulted in the advanced filter unless I put brackets around the part in the second list . There is no way of knowing which part is in brackets in the first list.
I have a huge list (over 900,000 rows) of text codes (e.g. ABC-12345) on Column A Spreadsheet 1 and would like to remove the ones that are not included in Column A Spreadsheet 2.
I changed all of the text on Column A Spreadsheet 2 to have the in front of it (e.g. ABC-1234) and tried to run the advanced filter but it does nothing.
This code works, but I would like to cut (remove) the records from the original record list.
Range("A:F").AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range _
("H1:H3"), CopyToRange:=Range("J1:O1"), Unique:=True
I need to lookup and concatenate all the header values where the value in the corresponding row equals a certain value. For example, column D, has the column header value if the cell values equals "X". Likewise column E has the column header value if the cell values equals "Y". I have too many columns (this is just a simplified version) to use nested if statements.
resource1resource2resource3 XResources YResources
Jeff X resource2
John X X resource2 resource3
Jim Y resource1
I'm not an excel newbie, but I keep thinking there must be a simple solution that I am missing.
i am trying to work out the coinage for wages ie. 5546.75 needs to brake down into dominations ,notes and change i live in south africa so we use the desimal system. i have tried to use floor and mod as formulas but at some points it returns an error or incorect result.
View 8 Replies View RelatedI am trying to create a function using vba and the advanced filter function.
The spreadsheet I am using changes from week to week so it can have different amounts of columns and also rows.
This is my code.
Sub FilterCGML()
Dim rngToFilter As Range
Dim rngFilterCriteria As Range
Dim LastRow As Long, LastCol As Integer
With Sheets("Main FTE")
Range("b2000").Value = "Cost Code"
Range("b2001").Value = "5*"
It works ok if I have values in columns A:X but if for example I only have information in A:S I get a runtime error.
I know how to find the last column and last row by using
LastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
LastCol = Range("IV1").End(xlToLeft).Column
But I don't know how to modify my code to use these.
I am trying to perform a function that searches through the first column for any active "A" account and then copies the corresponding rows information into another worksheet. I think I need to use the advanced filter function however I can't seem to figure it out.
I have a list of subscribers, each with an account id and the years for which they have subscribed. Each account id can be listed up to five times. I am trying to find out how to use advanced filter(or some other way!) to find those accounts that were subscribers in any of the previous four years but not the current year.
View 9 Replies View RelatedI want to create an advanced filter criteria along the lines of
=AND(col1>begindate,col1<endate)
where 'col1' is the title in the cells at the head of the appropriate columns in the data range (B1), criteria range(F1) and extract area range (I1), and 'begindate' and 'enddate' are named single cells.
Why doesnt this work?
i am trying to use the autofilter command to paste 4 columns else where on the page using unique = true. this only will run once. when i try to run it again everything is blank. please see code below.
Sub copyindex01()
Columns("L:O").Select
Range("O1").Activate
Selection.Delete Shift:=xlToLeft
Range("G2").Select
Columns("G:J").AdvancedFilter Action:=xlFilterCopy, CopyToRange:=Columns( _
"M:P"), Unique:=True
Range("L1").Select
End Sub
I created an advanced filter macro which analyzes the "Orig_Appmt_Data" dataset from the "Summary" worksheet and provides the resulting analysis on the "Effective Rate" worksheet. However, when I change the name of the workbook, the macro fails. I was hoping someone could provide some assistance in helping adjust the vba code to take into account the subsequent changes in workbook filename. Here is the
Sub ER_Analysis()
'
Range("B8:R109").Select
Selection.ClearContents
Columns("P:R").Select
Selection.EntireColumn.Hidden = False
Range("Q5").Select
Range(" Conversion 3-28-07.xls'!Orig_Appmt_Data"). _
AdvancedFilter Action:=xlFilterCopy, CriteriaRange:=Range("Q5:Q6"), _
CopyToRange:=Range("B8:R8"), Unique:=False
Range("B8:R8").Select
Selection.AutoFilter
Range("B8:R87").Sort Key1:=Range("P8"), Order1:=xlDescending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Selection.AutoFilter Field:=1, Criteria1:="<>", Criteria2:="<> TOTAL"
Columns("Q:Q").Select
Selection.EntireColumn.Hidden = True
Columns("P:P").Select
Selection.Font.Bold = True
Range("P8").Select
End Sub
I am trying to create my critera section for an Advanced Filter, but it seems like Auto Filter uses each row as a specific filter.
i.e. If I need to filter all the "2"s in column A, but both the "1"s and "2"s in column B, I need to create two different filters like this:
Column A Column B
2 1
2 2
Instead of just:
Column A Column B
2 1
2
Is there any way I can use auto-filter without having to put in every possible combination of my criteria in as different filters? Auto Merged Post;I did try creating columns next to each other, but that seems to only work as an "AND."
Per my example, I need to return everything with column A = 2, and column B = 1 or 2.
Except in my actual spreadsheet, it's more like where A = {1,2,3,4,5} and B = {0,9,8,7,6} and C = {a,b,c,d,e}
I've written a macro in an attempt to automate the advanced filtering in Excel.
VB:
Sub FilterData()
Sheets("Filter").Select
Range("B10").Select[code]....
I have a large spreadsheet of data, with various columns with different bank names, the amount (column H) each bank holds plus loads of other columns. Some of the banks are duplicated, so in a way I want to do an advanced filter to get rid off the duplicate lines, except that I need the amounts (column H) summed.
View 2 Replies View Related
