the macro mentioned below has been assigned to a combo-box form. I have 2 different datasets in the same sheet, they have the same headers (but named differently, myhead and myhead1) and the same adv filter criteria range (named as "dcrit") is applicable to both datasets. So, if an item is selected from the combo-box, both the datasets should get filtered according to same criteria. how i can combine the 2 IF LOOPS mentioned in the code?
Sub myfilt()
Application. ScreenUpdating = False
If ActiveSheet.FilterMode Then ActiveSheet.ShowAllData
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead"), Range("myhead").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
If Not (Range("indsignal")) Or Not (Range("countsignal")) Then
Range(Range("myhead1"), Range("myhead1").Offset(1, 0).End(xlDown)).AdvancedFilter _
Action:=xlFilterInPlace, CriteriaRange:=Range("dcrit"), Unique:=False
End If
Application.CutCopyMode = False
Application.ScreenUpdating = True
This is quite a easy one. I am a begineer so I don't know how to do it. I keep getting a runtime error. I want create a macro that does the following. I have this data(it is made up).
What would be the code for this? I want use the code for bigger data?. Also if you have a file which is 100 lines long and your macro does a series of steps for that file. Then you have another file and you want the same steps done but it is 500 lines long. How would you write a macro thatrun the steps taking in the last line and not just a 100 lines.
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data. DATA is the name of the raw data worksheet The criteria range should be AZ1:BC3, but of course royally breaks it...
I have an Excel sheet with a few thousand rows which I would like to filter by a column with the name TrackingID. This column contains values like:
12AA1 23452BA2 234AA1 345635CA2 ...
I would like to filter this column by the third character from the end (which is always a letter from the range [A-Z]). In the example above, this would be:
I'm trying to automate advanced filter but can't get past having just 1 critreria. I have attached an example spreadsheet where the download dump is on "Data" sheet and the result of the advanced filter is on the "Result" page. I would like, if possible, for the result to come up every time the criteria is put in (they are all data validation lists).
so for example, if i select account code, all those codes come up then select period and the list dwindles down and again for cost centre. Is it possible to do this without using macros. I have found the following code butnot sure what to do with it (sorry).
Is there a way to edit my database located on sheet 1 using the advanced filter (output) on sheet 2?
I have a gigantic database and I want to filter it down to the rows I need to edit.. so I used advanced filter to extract the rows I need on to another sheet. But if I edit the rows on sheet 2 how do I makes those changes reflect on sheet 1 (the full database)
Is there any way to use Advanced Filter placing the result (the filtered data) in another sheet??? I have tried but with no success... An error message is displayed (something like "It's not possible copy filtered data from a sheet to another").
if it is possible to write/record a macro that will automatically add a summary/total row immediately below the data that is created from an advanced filter. (XL00)
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
I work on an excel spreadsheet all day and I'm constantly cuting and pasting a value to filter another column. I would love to have a macro button that would automatically do this.
The job card sheets are labled 'Page 1' through to 'Page 175'. As I am working on each job card sheet I need to filter column on another sheet within the same workbook. This is indicated on the attached picture.
So in a perfect world as I would enter in the PLANT ID number on to any job card, then hit a macro button on the toolbar and the Pole No column would then be filtered by the value in the PLANT ID cell.
As there are multiple job cards the macro would probably need to use the 'active cell' value to filter by. But as you can probably tell I'm no expert so you judge the best way to do it.
MWTS034G22 Job Card Sheet [URL] ..... Windows 7 (32bit) MS EXCEL 2010
I searched and found a couple of different active.sheet codes but could not get it to work. What I want to do is move the worksheet tab I create in the code below all the way to the end (right) of the worksheet tabs already in my workbook.
I wrote this code today and it works - sometimes. Really it only seems to work when I have one of the sheets(zvur013) is in focus (ie, it was the last sheet to have been tabbed to). I dont understand what I'm missing, please help.
Sub lookforitems() Dim items() Dim groupnums() Application. ScreenUpdating = False
Set allitems = Workbooks("zvur013.dbf").Sheets("zvur013") Set allgnums = Workbooks("Groupnumbers.xls").Sheets("sheet1") Countgroups = Application.WorksheetFunction. CountA(allgnums.Columns(1)) countitems = Application.WorksheetFunction.CountA(allgnums.Rows(1)) ........................... allgnums.Cells(j + 1, i + 2).Value = x Debug.Print x Next j Next i
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count) ActiveSheet.Name = Range("O4").Value ActiveSheet.Range("O4").Copy ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues End Sub
Column J1 is called: Resource Name which has 1,000+ staff other columns have corresponding Hours, Project names etc
I want an advanced filter where I select COLUMN J:J and filter this whole sheet based on say 25 names (in the format they're in) e.g
Frank, James Wilkonson, Paul, etc
In the Advanced Filter, Ive selected J:J as LIST RANGE, but how do I input an OR statement in the Criteria, as above i.e where name is Frank, James OR Wilksonson, Paul OR
Alternatively, I have the list of the 25 names in Sheet 2, can the Advanced Filter do a VLOOKUP then filter entire Sheet based on the names provided?
I have a condition in advanced filtering as >90%. However, I would like the "90%" to be calculated via a formula in another cell and this condition to reference it. Is it possible?
I have a file that has a column of dates. I would like to use advanced filter to filter anything with a date that is <today()-1 but I can't seem to make the fomula work. I can make it filter on =today()-1 but when I use the < it doesn't calculate today's date and gives me nothing.
Basically I have set up a list on sheet1, this is now on a drop down in sheet2 and my raw data in sheet3.
I want the table in sheet2 to just display the product items I select in the dropdown but it is displaying all the raw data (although is updating when I update the raw data)
Granted I copied the code whilst researching but I'm just not quite there.
Could someone possibly look at the attached and let me know where I am going wrong. Also as you can tell I am very new to teh VB application in Excel, could anyone reccommend a good place to start learning the very basics?
why the Advanced Filter works in the macro but not in the UDF?
Code: Public Function strUniqueVal(rng As Range) 'rng variable must include sheet name Dim c As Range rng.AdvancedFilter Action:=xlFilterInPlace, Unique:=True
I have a worksheet that conatins multiple columns that are populated from a sql query.One column is a parts list.This has 1705 rows.
I have another worksheet that contains a list of parts in one column.This list is varying in row length.
I want to be able to produce a list that only contains matching data , including () around parts and if not too difficult an indication of data that is not in first list but is in second list.
When I do an advanced filter using the second list as the criteria i am not recieving all of the data from the filter , ie in the first list there is parts in (1234XYZ ) but in the second list the part is 1234XYZ , this part is not being resulted in the advanced filter unless I put brackets around the part in the second list . There is no way of knowing which part is in brackets in the first list.
I have a huge list (over 900,000 rows) of text codes (e.g. ABC-12345) on Column A Spreadsheet 1 and would like to remove the ones that are not included in Column A Spreadsheet 2.
I changed all of the text on Column A Spreadsheet 2 to have the in front of it (e.g. ABC-1234) and tried to run the advanced filter but it does nothing.
