Folder File List VBA Code Error
which is something that I am wanting to use in my spreadsheet.
When using this, i get a compile error on:
FSO As Scripting.FileSystemObject
The code I am using is the following:...
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View RelatedVB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
Can some see why this Code would fail intermittently?
This gets executed after a Commandbutton is selected.
The Error Message is attached.
I am using the following code to put a combo box in my userform. When I try to run it I get the following Compile Error: For without next. What does it mean and how do I fix it?
View 9 Replies View Relatedjust make some files to make my work easier. Few too many watching the game last night, and I think im lost here. Am I attempting to do too much here ? I ran the first For statement Fine, but I cant get the second to work. I dont understand where my next statement should be entered.
View 4 Replies View RelatedVBA but familiar with other programming languages.
I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.
The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.
I am new to VBA. I have been getting compile error on the below code:
Public Sub hourCalculation()
Dim rcount As Integer
Dim rindex As Integer
Dim logintime As Date
Dim logoutime As Date
[Code] ..........
Every time I wrote something wrong I stupid and annoying pop windows appears and I have to press ok different times and be quick to correct the problem, otherwise it appears again.
I'm trying to write a macro that will insert a excel formula into a specific cell. When I try to run the macro I receive a compile/ syntax error. I don't understand why as the formula works in excel. Here is the code (formula only)
View 4 Replies View RelatedI have an application that will require I create 20+ objects from a class I have created call "cWorkCenter." This is my first project using objects in VBA. I've created a string variable called "Title." THe application will loop through a list of resources on a worksheet, assign the name of that resource to the variable called "Title" (eg. Title=Range("A1")), then create an object named whatever the string is that "Title" represents. For example, if the first item in my list is "Resource1", then the first object created should be called "Resource1"
When I do this I get the following error: Compile Error: Duplicate declaration in current scope.
Below is the part of the code giving me trouble.
VB:
Public Title As String
Sub Loader_OO()
Title = "Resource1" [code].....
I attempted to initialize values on a few Dim statements, but got compile errors: "expected end of sentence".
VB:
Dim sumTtl As Currency = 0
Dim searchTxt = "West"
Trring to use function edate() in VBA macro, I've activated atpvbaen.xls in Tools/Register but get compile error:"Sub or function not defined".
View 5 Replies View RelatedHave two worksheets in same workbook. First worksheet is "ReArrangedAddr" Which basically has a command button to click to run a "Sub" behind the second worksheet "Orig SH Register". When I click on button on first worksheet, I get error "Compile Error: Sub or Function not defined"
* * * * * code behind command button * * * * *
New to VBA and just trying to make some edits to some existing code. I have basically copied a pre-existing form and module and changed names from "Appendix" to "Drawing" as I am trying to replicate what the piece of code already produces for a table of appendices, for my drawings.
However, when I try and run the form I get Compile error: Variable not defined with lstDrawings highlighted.
[Code] ...........
Is this something that should be defined in my global module which I am missing?
I was wondering if anyone knows how to fix this. I've sent out a worksheet with macros that call up userforms but when someone runs the form and tries to call up some userforms they get this error.
I've written some VB code in Excel 2003 which hides and unhides worksheets dependant upon 'Yes' or 'No' in a named range. This works Ok in Excel 2003, however if I try and use it in Excel 2007 it shows error 'Compile Error in Hidden Sheet'. When I debug it the error 'Compile Error - Method or Data Member Not Found' appears. The code in question is as follows:
View 9 Replies View RelatedI am trying to use the Find function within some VBA code but keep encountering a compile error. Code works fine on it's own as below but doesn't work within the VBA code. I can't figure out what part of code needs to be modified.
The desired result in J2 = "Jim"
the value in cell I2 = "Jim |Anderson"
Working Function as follows:
I sent the attached to a user who said it wouldn't run when the 'Draw Venn' button is click - some sort of RefEdit compile error. I can't replicate the error and can't find what's causing the error.
I had started using RefEdit control but couldn't get it to work the way I wanted, so just went with input boxes. I run this on XL07 SP2, other user has XL03 - not sure if that's relevant to the error they're getting.
Hello, Im using a script that allows me to autocomplete a data validation list using a combo box and the code shown below. However I am getting a compile error ambigous name detected and the following line is highlighted
"Private Sub Worksheet_SelectionChange(ByVal Target As Range)"
I know its because this is used twice but I am not sure what to do in order to fix this.
Compile Error: Invalid Outsid Procedure
I have Compile error coming up when I try to run Sub DeleteRecord on Sheet 2. It brings me to the VBE with sheet 1 code brought up and the Compile Error showing, with the xlup portion of the code highlighted. I okay the error and it highlights the Sub DeleteRecord on Sheet 2 with a yellow arrow.
Sheet 1 code as follows:
Dim y As Long
y = Range("A65536").End(xlUp).Row
Range("A1").AutoFill Destination:=Range("A1:A" & y), Type:=xlFillDefault
Range("J1").AutoFill Destination:=Range("J1:J" & y), Type:=xlFillDefault
Range("K1").AutoFill Destination:=Range("K1:K" & y), Type:=xlFillDefault
Range("L1").AutoFill Destination:=Range("L1:L" & y), Type:=xlFillDefault
Range("M1").AutoFill Destination:=Range("M1:M" & y), Type:=xlFillDefault
Range("N1").AutoFill Destination:=Range("N1:N" & y), Type:=xlFillDefault
Range("O1").AutoFill Destination:=Range("O1:O" & y), Type:=xlFillDefault
Range("P1").AutoFill Destination:=Range("P1:P" & y), Type:=xlFillDefault
Sheet 2 code at follows:
Sub DeleteRecord()
'
' DeleteRecord Macro
'
'
Application.ScreenUpdating = False
ActiveSheet.Unprotect
ActiveCell.Offset(4, 3).Range("A1:H2").Select
[code]....
The following code has been used previously to enter data from a userform to a worksheet without a problem. However, since I added some new bits of code I am getting a compile error with the message variable not defined.
Here is part of what I have so far and the bit that is highlighted after the error comes up is the 'Set ws' line;
Code:
Private Sub CommandButton1_Click()
Worksheets("Duties").Range("C5") = txtdate
Worksheets("Duties").Range("H5") = txtarea
Worksheets("Duties").Range("N5") = txttea
Set ws = Worksheets("Duties")
'find first empty row in database
iRow = ws.Cells(Rows.Count, 1) _
.End(xlUp).Offset(1, 0).Row
The code I have recently added:
Code:
Private Sub UserForm_Initialize()
Set wsRes = Worksheets("Resources")
With wsRes
.Range("B1", .Range("B" & Rows.Count).End(xlUp)).AdvancedFilter xlFilterCopy, , .Range("L1"), True
With .Range("L2", .Range("L" & Rows.Count).End(xlUp))
cboTeam.List = .Value
.EntireColumn.Clear
[Code] .......
I have a two set of Macros in a workbook. One is to create a command button on a sheet and other macro will run onece the created commond button is clicked.
Macro runs fine. Command button gets created, but when I click the command button to run another macro it gives error "Compile Error: Sub or Function not defined" highlighting the code "Call Add" at the code entered for sheet. This code is added by macro in the sheet1. I am attaching a sample file as well as codes.
Sub CreateButton()
Dim Obj As Object
Dim Code As String
Sheets("Sheet1").Select
'create button
Set Obj = ActiveSheet.OLEObjects.Add(ClassType:="Forms.CommandButton.1", _
Link:=False, DisplayAsIcon:=False, Left:=600, Top:=30, Width:=100, Height:=35)
Obj.Name = "InsertInvoiceButton"
'buttonn text
[code]....
Why do I get the below error when I open my workbook? The highlighted function is below.
Private Sub CommandButton1_Click()
Dim myText As Variant
If TextBox1.Value = "code" Then
UserForm1.Hide
Else
Me.Label1.Visible = True
Me.Label1.ForeColor = vbRed
End If
End Sub
Basically I want the macro to look through a column of values and if any cell in that column has the value 'LOCK' the macro would hardcode 'n' into the adjacent cell. Additionally, because the column in which the LOCK cells would appear is part of a vlookup, it returns #N/A which I would like my macro to ignore and then continue to evaluate the next cell all the way to the end of the column.
The code is the following:
Sub Hard_Code_Cells()
On Error Resume Next
lastrow = Cells.Find(What:="*", After:=Range("A1"), LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlPrevious).Row
[Code] .......
I've been receiving the error message 400 when I trigger the macro and I'm not sure how to correct my code to resolve the issue.
why this would suddenly stop workin and start giving the above? Error occurs on the first GoTo ExitProc
Code:
Sub ConsolidateDataUsingFileList()
'--Purpose is open each file specified in sheet Info, then copy
' that file's data and append it to the dataset
[Code]....
I found this code in the Mr. Excel archives. It is designed to add a sequential number to a cell if the cell next to it contains text and then stop as soon as it encounters a blank. Problem is that I keep getting a Compile Error: Object Required on the Set nos line. I tried using a qualifier and also expirimented with CreatObject but still received the error.
Sub AddNos()
Set nos = Range("B1", Range("B1").End(xlDown)).Offset(0,-1)
nos.Resize(1,1).Value = 1
nos.Resize(1,1).AutoFill nos, xlFillSeries
nos.NumberFormat = "General""."""
End Sub