Compile Error In Hidden Sheet
Jan 14, 2009
I've written some VB code in Excel 2003 which hides and unhides worksheets dependant upon 'Yes' or 'No' in a named range. This works Ok in Excel 2003, however if I try and use it in Excel 2007 it shows error 'Compile Error in Hidden Sheet'. When I debug it the error 'Compile Error - Method or Data Member Not Found' appears. The code in question is as follows:
View 9 Replies
ADVERTISEMENT
Dec 31, 2012
When I open attached excel file excel show message that," Compile error in hidden module in sheet 1". and file stop working. this error occur in only in Pc. How I remove this error.
View 1 Replies
View Related
Oct 9, 2007
I was wondering if anyone knows how to fix this. I've sent out a worksheet with macros that call up userforms but when someone runs the form and tries to call up some userforms they get this error.
View 9 Replies
View Related
Aug 15, 2007
I get the error message "Compile Error In Hidden Module: Thisworkbook" every time i start excel 2007. I've only installed it recently and only settings I have changed in excel is install the add-ins solver and data analysis. I've also had Nitro PDF 5 Pro installed before Office 2007 was installed. I have recently uninstalled Nitro PDF5.
I'm not a coder and so I havent messed around with marcos etc. How do I get rid of this issue in excel 2007?
View 3 Replies
View Related
Nov 11, 2008
I am getting the following error when i move the cursor to a different cell in my excel sheet.
Compile error in hidden module: sheet1
When i tried to debug i found the error is shown in the line:
View 11 Replies
View Related
Oct 14, 2006
I have a workbook that contains a form that requires the user to enter a valid username and password to open the workbook. On my laptop it runs perfectly. On my desktop I have issues. When I launch the workbook on my desktop, I get the userform login as I am supposed to. Once I enter the login info I get the following error:
"Compile error in hidden module: UserForm1"
My desktop operating system is as follows:
Windows XP
Professional
Version 2002
Service Pack 2
And I am running the following version of Excel:
Microsoft Excel 2003 (11.8105.8107) SP2
Part of Microsoft Office Professional Edition 2003
Once again, it seems to work perfectly on every PC except for mine. I need to be sure I have no compatability issues. Please help. I can post the code if need be.
View 9 Replies
View Related
Dec 16, 2006
I have a problem i have written an excel macro in VBA and it is working on some computer but on the others it is not working. It says "compile error in hidden module"
View 3 Replies
View Related
Nov 30, 2012
I am currently working with a hidden sheetname "hide_template" which contains formula linking to another sheetname "rawdata" of same workbook.
In this "rawdata", the contents is updated from time to time.
The problem is when I open this workbook and update the entries in "rawdata", the formulas/results in "hide_template" is not updated and invalid (ie. #N/A, #VALUE..)
This is the overview of process that Im working with:
===> open workbook ===> paste new entries on "rawdata" ==> run a macro to copy range in the "hidden_template" to paste to new sheet of same workbook
I already have a working macro to copy range from the "hidden_template" which works as follows:
===> set to visible the "hidden_template" ===> copy range from "hidden_template" ===> paste to new sheet ===> set to hidden the "hidden_template"
View 1 Replies
View Related
May 3, 2012
This first macro works fine:
Sub UnhideHBPorCholesterolQ1toQ3()
'
ActiveSheet.Unprotect "password"
Rows("58:67").Select
[Code]....
why the second macro does not seem to work. I get a Run-time error that says "Unable to set the Hidden property of the Range Class".
View 1 Replies
View Related
Feb 7, 2007
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
View 6 Replies
View Related
Apr 26, 2006
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
View 2 Replies
View Related
May 20, 2009
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies
View Related
May 17, 2014
VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
View 4 Replies
View Related
Feb 1, 2010
"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
View 9 Replies
View Related
Aug 27, 2009
Basically my code is bombing at the red highlighted code. Error: "Run-time error '1004': Copy method of Worksheet class failed"
Sheet "Blank Form" is a hidden sheet. Can I alter the red section of code to work while being a hidden sheet? I tried a few variations but nothing seems to work..
View 5 Replies
View Related
May 4, 2008
Can some see why this Code would fail intermittently?
This gets executed after a Commandbutton is selected.
The Error Message is attached.
View 14 Replies
View Related
Sep 14, 2009
I am using the following code to put a combo box in my userform. When I try to run it I get the following Compile Error: For without next. What does it mean and how do I fix it?
View 9 Replies
View Related
May 2, 2008
just make some files to make my work easier. Few too many watching the game last night, and I think im lost here. Am I attempting to do too much here ? I ran the first For statement Fine, but I cant get the second to work. I dont understand where my next statement should be entered.
View 4 Replies
View Related
Jul 20, 2009
VBA but familiar with other programming languages.
I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.
The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.
View 9 Replies
View Related
May 11, 2014
I am new to VBA. I have been getting compile error on the below code:
Public Sub hourCalculation()
Dim rcount As Integer
Dim rindex As Integer
Dim logintime As Date
Dim logoutime As Date
[Code] ..........
View 9 Replies
View Related
Jun 11, 2008
Every time I wrote something wrong I stupid and annoying pop windows appears and I have to press ok different times and be quick to correct the problem, otherwise it appears again.
View 9 Replies
View Related
Dec 3, 2009
I'm trying to write a macro that will insert a excel formula into a specific cell. When I try to run the macro I receive a compile/ syntax error. I don't understand why as the formula works in excel. Here is the code (formula only)
View 4 Replies
View Related
Mar 19, 2013
I have an application that will require I create 20+ objects from a class I have created call "cWorkCenter." This is my first project using objects in VBA. I've created a string variable called "Title." THe application will loop through a list of resources on a worksheet, assign the name of that resource to the variable called "Title" (eg. Title=Range("A1")), then create an object named whatever the string is that "Title" represents. For example, if the first item in my list is "Resource1", then the first object created should be called "Resource1"
When I do this I get the following error: Compile Error: Duplicate declaration in current scope.
Below is the part of the code giving me trouble.
VB:
Public Title As String
Sub Loader_OO()
Title = "Resource1" [code].....
View 2 Replies
View Related
Jun 10, 2014
I attempted to initialize values on a few Dim statements, but got compile errors: "expected end of sentence".
VB:
Dim sumTtl As Currency = 0
Dim searchTxt = "West"
View 4 Replies
View Related
Apr 9, 2014
Trring to use function edate() in VBA macro, I've activated atpvbaen.xls in Tools/Register but get compile error:"Sub or function not defined".
View 5 Replies
View Related
Jul 9, 2014
Have two worksheets in same workbook. First worksheet is "ReArrangedAddr" Which basically has a command button to click to run a "Sub" behind the second worksheet "Orig SH Register". When I click on button on first worksheet, I get error "Compile Error: Sub or Function not defined"
* * * * * code behind command button * * * * *
View 14 Replies
View Related
Aug 12, 2014
New to VBA and just trying to make some edits to some existing code. I have basically copied a pre-existing form and module and changed names from "Appendix" to "Drawing" as I am trying to replicate what the piece of code already produces for a table of appendices, for my drawings.
However, when I try and run the form I get Compile error: Variable not defined with lstDrawings highlighted.
[Code] ...........
Is this something that should be defined in my global module which I am missing?
View 3 Replies
View Related
Mar 31, 2009
I am trying to use the Find function within some VBA code but keep encountering a compile error. Code works fine on it's own as below but doesn't work within the VBA code. I can't figure out what part of code needs to be modified.
The desired result in J2 = "Jim"
the value in cell I2 = "Jim |Anderson"
Working Function as follows:
View 3 Replies
View Related
Jul 9, 2009
I sent the attached to a user who said it wouldn't run when the 'Draw Venn' button is click - some sort of RefEdit compile error. I can't replicate the error and can't find what's causing the error.
I had started using RefEdit control but couldn't get it to work the way I wanted, so just went with input boxes. I run this on XL07 SP2, other user has XL03 - not sure if that's relevant to the error they're getting.
View 4 Replies
View Related
Feb 16, 2010
Hello, Im using a script that allows me to autocomplete a data validation list using a combo box and the code shown below. However I am getting a compile error ambigous name detected and the following line is highlighted
"Private Sub Worksheet_SelectionChange(ByVal Target As Range)"
I know its because this is used twice but I am not sure what to do in order to fix this.
View 11 Replies
View Related