In the code below, I am copying information from a master sheet to various sub-sheets, but I cant figure out how, based on the way I have written my code, to copy and paste special values. I commented out the line that I need pasted special values.
Dim intData As Integer
Set wsData = Worksheets("Data")
LastRow = wsData. Range("A" & Rows.Count).End(xlUp).Row
Set wsCrit = Worksheets.Add
wsData.Range("E3:E" & LastRow). AdvancedFilter Action:=xlFilterCopy, CopyToRange:=wsCrit.Range("E3"), Unique:=True
LastRowCrit = wsCrit.Range("E" & Rows.Count).End(xlUp).Row
For I = 4 To LastRowCrit
Set wsNew = Worksheets.Add
wsNew.Name = wsCrit.Range("E" & I).Value
wsNew.Range("a3").Value = "Estimator"
wsNew.Range("a5").Value = "IP Number"
wsNew.Range("b5").Value = "Project Name" ......................
I have a perplexing problem. I created code to copy a worksheet that has the correct page setup and then copy/paste special to get just the values, not the formulas from the master sheet. It works standalone - the copied worksheet after doing the paste/special just has the data along with the master sheet's original page setup. When I include the code within a For Each... loop, it only copies the worksheet and I get the formulas. What is different between the two approaches that would cause the loop code to not do the paste/special values?
I use to have a macro that could copy formulas from non contiguous ranges and paste the values in the same cells. So for example, I could select a non contiguous range like B5:B10, E10:F12, and G1:G10. The macro would then copy and paste the values in those 3 ranges, so those 3 ranges would be values instead of formulas.
I think it worked by storing each range and then looping through each range to copy and paste special values.
I have 9 worksheets in a book with sheets 1-8 used for data entry, and sheet 9 used for a weekly data upload. Sheets 1-8 are all formatted the same, they just represent different vendors. I need a macro to look through column F (invoice number) on sheets 1-8 and see if the value of each cell already appears in column c on sheet 9. If the value is not found and the row value for column M (sheets 1-8) is >0, I need to copy the data from columns D:K and paste special values into the next blank row on sheet 9.
Basically I'm trying to see if I've already paid an invoice, and if not then I need to automatically add the data for payment. I've tried to mess around with a VBA code myself and ended up with a migraine every time. I've also tried to use the advanced filter, but the cell values I need to copy over contain formulas and conditional formatting...not to mention I can't delete the data on sheet 9 that has already been added.
i would like to copy a sheet to another sheet, rename, copy and paste special values. but after the sheet is copied to another, the macro stops working...?
I am trying to create a macro to copy multiple sheets to a single named worksheet, all within the same workbook. The code below works, except I want to copy only the data (no formulas). Can I add code to paste values, or do I need to start over?
Public Sub CopyandPaste() Dim ws As Worksheet Worksheets("Summary").UsedRange.Delete For Each ws In Worksheets If ws.Name <> "Summary" Then ws.Range("a2"). CurrentRegion.Copy _ Destination:=Worksheets("Summary").Range("A65536").End(xlUp)
Been playing with this for some time and can't quite figure it out. I'm trying to copy a named range and paste special value to another named range of the same size. I recorded a Macro that does what I need, and I'll use if necessary, but thought I'd try to consolidate the code a bit and can't get it to work. The recorded macro is as follows:
Sub PasteRanges() Application.Goto Reference:="DataCopy30Yr" Selection.Copy Application.Goto Reference:="DataPaste30Yr" ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _ IconFileName:=False End Sub
My attempt to consolidate was this:
Sub PasteRanges() Range("DataCopy30Yr").Copy Destination: Range("DataPaste30Yr").PasteSpecial (xlPasteValues) End Sub
I get the Run-time error 1004 Copy method of Range class failed when I try to run this. Again, I can use the longer version with no problem, but in the interest of learning and since I have spent some time not being able to come up with the solution, I thought I'd ask the experts opinions before I gave up on it.
Need VBA macro that will copy & paste (Special > AS VALUES) from one of two (Data A & B) sheets based on the contents of a validation cell ($D$4) in a third (Report) sheet? The destination starting cell would be $F$11. ALSO - I'd like to have the Named Ranges "DataAExtract" & "DataBExtract" used in the code (for the COPY region) so I can see an example of how to reflect my actual named ranges in my working file.
The reason for doing this is that the "c.Characters...." lines in my conditional formatting macros (attached) are not working on cells containing formula output (in my working file the Report page is all populated by VLOOKUP results), but the macros run fine on hard-coded values. In my attached workbook, I'd like to have the "NEW" macro for the copy & paste step fire first in the sequence of macros running after the FORM button-click (control located in cell $D$5 of the Report sheet), whether that's by writing a new macro and calling mine before the new one ends, OR by consolidating all of my macros plus the new one into one smooth progression.
With this low-tech approach I can get updated VALUES into the report area once the user selects a data source and a customer on the report sheet. The COPY ranges in my working spreadsheet will update based on the selections made in the report page. I tried recording a macro and then modifying the recorded code to add the "If > Then" functionality I'm looking for, but I'm pretty green when it comes to VBA code and syntax.
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6() Cells.Select selection.Copy selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
For which I get 'Compile Error - Expected Function or Variable'
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
I have a person who needs to be able to copy and paste values very frequently. She would like me to set up a personal macro on her PC that will allow her to be able to right-click in a cell and have a context item that is paste values so she does not need to go to the paste special dialog continually.
E.g: She selects a range from one workbook and copies it, She then selects a cell in a second workbook and pastes the values into the second workbook. She does not mind pasting the formatting, but she does not want to paste the formulas as there are many named ranges in the formulas and if she inadvertently pastes everything, all of a sudden the next time she opens her second workbook there are links to the first. All she wants in the second workbook are the values, not the formulas.
I am trying to copy a range of cells and Need to transpose the values. Easy Enough? When I right-click and paste special, it gives me a new window with an array of options but not the standard Paste special value screen. I have used the others in the past and just pasted text. However this does not give me the paste transpose option which is what I need.
I am sure this is a User error where there is something about the way that I am copying this information but I am Drawing a Blank...
I have a workbook where I want to retain FORMATS in all of my cells in all of my sheets, but allow the user to enter data. So I got this code to undo PASTE and instead do a PASTE SPECIAL VALUES:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim UndoString As String
On Error GoTo err_handler
UndoString = Application.CommandBars("Standard").Controls("&Undo").List(1) If Left(UndoString, 5) = "Paste" Then 'Only allow Paste Special|Values Application.ScreenUpdating = False Application.Undo Target.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Application.ScreenUpdating = True End If......................
I have a macro that should allow users to change a certain range to values, but I have problems with that last piece. Can anyone tell me what the command is to paste the range as values?
Sub Change_Range() Dim UserRange As Range DefaultRange = Selection.Address On Error Goto Canceled Set UserRange = Application.InputBox _ (Prompt:="Change Range to Values:", _ Title:="Range Change", _ Default:=DefaultRange, _ Type:=8) UserRange.Copy UserRange.PasteSpecial Canceled: End Sub
Im trying to get some VBA to search in my worksheet to find a match to the value of cell B5 (the value of B5 changes depending on user choice), then once a match is found I want to highlight from the matched cell to the right 5 columns and down to row 193 (so in total 6 columns would be highlighted down to row 193), then copy and paste special values over those cells.
Do anyone know that if excel can be copy and paste special value when some of the columns are filter? It seems that you can only do copy and paste special value when unfilter everything column.
Currently I have a macro which successfully updates a value in the report page, creates a new document and then copies and pastes (as values)that sheet into the new workbook and saves it down as a unique file.
I need to have graphs on this new workbook. So gathered creating a template and getting the macro to open this template, copy the ranges and then paste into the template (which will update the charts) and then save down.
The ranges i need to paste in are: B5:D7, and B11:P37 the destination cells are exactly the same.
I am creating a simple IF function. that says IF cell (cell name) = 2007 then copy and special paste values from these cells into this location...I am not entirely sure how this should be set up.
I have a workbook which contains lots of formula and is therefore very large (about 70 mb). The sheet pulls information from field instruments every hour of every day for the entire year.
I want to write a macro, that loops through a range (B5:B8764) and copies the entire row if the value in column B is less than =NOW() - 7 days. The copied rows should then be pasted with values only exactly where they were located e.g. row 5 should be pasted back to row 5 the only difference being only the values will be pasted.
create a macro to perform paste special as value function. First scenario.. IF cell A2 is equal to 1 copy paste special values in I2:J2 cells ( this cells are formula.. need to perform paste special to prevent it in updating)then IF A3 is equal to 2 copy paste special values in I3:J3 cells.same action till A31. Second scenario is if O2 cell has a value of 100% copy paste special as values formula in K2 cell, then if O3 cell has a value of 100% copy paste special as values formula in K3 cell.. same action till O31 cell. take note I manually input values in A2 TO A31 cells as well as on O2 to O31 cells. I want the macro to perform the paste special as values only when I put value in Cell A. and Cell O (CELL A and CELL O are not dependent to each other so they should function individually in the macro).
