I am attempting to copy some numbers from one spreadsheet to another including the formats. The format I am using is a user-defined one which doesn't normally appear in the list of personalised formats.
My code seems to work fine within the same spreadsheet but fails when I do it using 2 spreadsheets.
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at.
Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100.
Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell.
Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in.
Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5.
Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
I want to create a user defined function to search a column of data for a part number.
If it exists I want to have a the UDf returna "fail" otherwise "pass"
Here is the code I was trying to use
Function firstpass(SN As String) As String
ws = Worksheets("Defects")
c = ""
With ws.Range("a1:a9999")
Set c = .Find(SN, LookIn:=xlValues, lookat:=xlWhole)
End With
If Not c Is Nothing Then
firstpass = "Pass"
Else
firstpass = "Fail"
End If
End Function
This function only returns a "#value" and I don't quite know how to troubleshoot it.
Trying to convert an Excel 2003 macro to work in Excel 2007.
The problem line is
Dim MyDataObject As DataObject
I suspect the problem is a Missing Reference, but I cannot figure out which one. I have the same ones (in 2007) as 2003 except for one which is not showing
Microsoft Forms 2.0 Object Library
Is this the one it needs? It is called something else in 2007?
The ones I do have ticked are
Visual Basic For Applications
Microsoft Excel 12.0 Object Library
OLE Automation
Microsoft Office 12.0 Object Library
Microsoft ADO Ext. 2.8 for DDL and Security
Microsoft DAO 3.6 Object Library
Microsoft ActiveX Data Objects 2.8 Library
Microsoft Scripting Runtime
Microsoft XML v2.6
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application
'
' do nothing for now
'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
I had a working subroutine which I moved to another workbook (rather than linking to it and having both workbooks open at the same time).
Now I get "user-defined type not defined" when it runs. Here is the beginning of the
Global oApp As Object
Sub UpdateForecasts()
Call Update1
Call Update2
End Sub
Sub Update1()
Dim dPath As String
Dim dDest As String
Dim dCondition As String
Dim dName As String
Dim FSO As New FileSystemObject
Base 64 Encoding.
Dim objXML As MSXML2.DOMDocument
Dim objNode As MSXML2.IXMLDOMElement
Are causing the User Defined error, but the same workbook is OK in XP and Win 7.
VB6: Free, Easy and Quick Base64 Encoding and Decoding in Visual Basic [a NonHostile article]
Says you need a reference to Microsoft XML, v2.6 (or later) and the Win8/2010 workbook does have one for Microsoft XML, v6.0
I am trying to capture with Worksheet Change a command bar action like paste but I am getting an error :
“User-Defined type not defined”
Do I need a library of sort in References ??
Public Sub Right_Click()
Dim oControl As CommandBarControl
For Each oControl In CommandBars("Cell").Controls
Debug.Print oControl.Caption
If oControl.Caption = "&Paste" Then
oControl.OnAction = "MyPaste"
End If
Next oControl
End Sub
When I try to complile my VBA project, I get the following error "User-defined type not defined" but the compiler doesn't point to any line.
I remember what I did last was to rename a form and a Module, but I replaced their old names in all my code with the new ones ... Does this have anything to do with the error I am getting ?
I can't seem to make user-defined format that puts a text in front of a number and/or a text.
Let's say I have A1: 13, A2: texttext A3: text7 and I want to format a lot of cells to "Ilike 13" / "Ilike texttext" / "Ilike text7"... ie add the same text in the front of the cell, no matter what the content is.
I did manage it seperately, with "texttext" @ for text and "texttext" # for numbers, but what's the general one?
Which I am trying to modify to fit my needs:
Code:
Sub Test()
Const cURL = "Website Here" 'Enter the web address here
Const cUsername = "XXXXXX" 'Enter your user name here
Const cPassword = "XXXXXX" 'Enter your Password here
Dim IE As InternetExplorer
Dim doc As HTMLDocument
Dim LoginForm As HTMLFormElement
[Code] .......
I get the error User Defined type not defined on line:
Code:
Dim IE As InternetExplorer
Do I need to use references? Is there a quick fix for this?
I have code that works for a particular website but I am having trouble making it work for others. This code seems more flexible than the other code:
Code:
Option Explicit
Public Sub Press_Button()
'make sure you add references to Microsoft Internet Controls (shdocvw.dll) and
'Microsoft HTML object Library.
'Code will NOT run otherwise.
[Code] ........
My end goal is to log on to several websites and pull data out of tables on the websites back into excel so that I can have a one stop shop instead of logging into many websites manually.
This code works fine when I use it, but not when a co-worker uses it on his PC. The code and VBA references are the same. He gets the "User-Defined Type not defined" error. I'm wondering if there is an Outlook setting that may blow this up.
the code was working on his PC and then it stopped though no changes were made to the code. That's why I think it may be blocked by an Outlook setting.
Set appOutLook = CreateObject("Outlook.Application")
Set MailOutLook = appOutLook.CreateItem(olMailItem)
MailOutLook.Subject = "E-mail"
I've made a macro that inserts an entire new row above a specified cell, then updates each column of that row using offset.value and various constants and inputbox variables. Works great so far, unless I try to apply a validation rule to one of the cells.
The code I'm using to add the validation works okay when referring to a specific cell by reference e.g:
With Range("A1").Validation
etc...
However, when I change it thusly:
With Sheet2.Range("LastRow").Offset(-1, 5).Validation
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=Departments"
.IgnoreBlank = True
.InCellDropdown = True
End With
It doesn't like that one bit.
This is part of a private Sub attached to a button in the same sheet. I've had a scan through the archives looking for validation threads, but couldn't find anything that refers to problems with offsets (if indeed that is the problem here).
In effect the code looks at sheet 'data' and creates new tabs depending on the contents of column f and then pastes data from the entire row into those tabs as appropriate - this is what I asked for and works wonderfully. What I would like it to do is to also copy the format of the row that it is copying. (most importantly the cell borders and colours)
I can (I think) identify the copy and paste elements of the code but have no idea what if anything I can change to make this work.
The code is as follows
HTML Code:
Sub CopyData2()
application.ScreenUpdating = False
Call Sample ' this inputs data into column f
Dim rCell As Range
Dim lastRow As Long
[Code]....
I have a chart with coloring for specific series sets. When I create a similar chart, can I copy the formatting from one range to the other? Why does it default to certain styles?
View 1 Replies View Relatedi have this code at minute to copy information from all my sheets to a summary sheet , is there a way i can modify this code to copy from row 6 to 35 if there is a value in col b on sheet then copy a:bq of that row to summary sheet carry on to end of data , then on next ws copy row 6 as this is machine heading and then same again and loop through all worksheets i have in my array ....
View 9 Replies View RelatedI have a user form which includes some text boxes (txtRUL.text for example) where I want to enter a number as a percentage. I divide the number entered by 100 to avoid Excel automatically multiplying by 100 and the result is displayed in the user form as the correct percentage.
Private Sub txtRUL_AfterUpdate()
EnableSave
txtRUL.Value = Format(txtRUL.Value / 100, "0.0%")
(I'm sorry I cant figure out how to format this code as code in this post)
This works well, trouble is when I save and it writes the results to the worksheet, the numbers in the user form revert back to plain unformatted non percentage numbers (ie 5% goes to 0.05)
I have a file here that already has macros in it. The file is basically a excel document generator. When you click create sku, the document will generate multiple documents based on the user inputs.
1) In the generated documents the original "generator" file creates, I need generated files to have column B and D formatted to TEXT, currently all the generated files are formatted to general. (This code is in module 1, line 84 col 34.)
2) The other problem is I need to append the value in Cell N1 in the "sku data entry" sheet to be appended to the generated file names. (this part of the code is is in module 1, line 150 col 28.)
I was unable to attach my file to this thread because it was to big. however I copied the module where I think the code is causing problems:
Sub procData()
' Starting point for read/extract process
Cells(4, 6).Select ' Range = F4 (row 4, col 6)
For x = 6 To 52 Step 2 ' col F to col AZ
[Code]...
I have a workbook with worksheets that are named in various ways that I need a VBA macro to sort.
Some sheets have names that begin with numbers.
I am able to get the macro to sort them all alphabetically but those with numbers are always put at the start of the work book instead of within the alphabetical format I want to use
I may have sheet names like:
CAT 3CAT 1CAT 2CAT MONKEY DOG 4DOG 3DOG
This is how I want these sheets sorted:
CAT 1CAT 2CAT 3CAT DOG 3DOG 4DOG MONKEY
The sheet names are examples and not actual sheet names.
Below is my code so far
Code:
For lCount = 1 To lShtLast
For lCount2 = lCount To lShtLast And Not IsNumeric(Mid(UCase(Sheets(lCount).Name), 1, 1))
If UCase(Sheets(lCount2).Name) < UCase(Sheets(lCount).Name) Then
[Code].....
I did this macro which formats five worksheets in the same file. I saved this macro as a PERSONAL.XLS file. Last night when i open new files to re-run this macro it was working fine excep one of the worksheets wasnt formatting properly....the macro on this sheet wasnt working for some reason.
Then this morning when i opened new files and tried the macros again it wouldnt work at all. And there is no reacord of them I did five of them and they are all gone! I saved them so why did they disappear! I thought that when you saved a macro as a PERSONAL file that you could open new files and re-run that macro again and again????
- I have a worksheet (W1) which i have filters
- I have another worksheet (W2) that is formatted for a institutional purpose where i must put the things selected in the W1, but the problem is that: in the W1 i have a cell (A1) with some data but in W2 i have a space composed with one line but with several columns and excel says that he cannot paste the information copied in W1 to put in W2.
there is any way to avoid this problem because at the moment i am making copy paste one by one, and it takes to many time and i would like to copy and paste the information selected by the filter in W1 to paste in W2.
I'm having trouble getting a User Defined formula to work. I received an email containing a User Defined formula for SUMCOLOR and COUNTCOLOR. The first sums all the values in like-colored cells, and the second counts all the cells of like-color in a given range. The VB code for the module is as follows:
View 2 Replies View RelatedPossibility of creating "on measure" functions for the necessities of every customer, but I have some things to ask in merit and I hope that you can answer to me:
- which are the differences between a User Defined Function and a Macro?
- also User Defined Function is written in Visual Basic?
Can you create user-defined events in excel? I ask because the worksheet_change event does not capture pastes or undo/redo.
View 4 Replies View RelatedI am trying to create a function using the functions of IF and "And", but for any reason I don't know how to add the Add function
My function written in excel will looks like =IF(AND(A80="00",C80<>"8300"),"yes","no")
LOB Cost Center
00 1000
00 2000
00 8300
01 5000
02 8300
Function Allocation(LOB As Integer, CostCenter as Integer) As String
If LOB = 00 And CostCenter <> 8300 Then
Allocation = "Yes"
ElseIf LOB = 1, 2, 3, 4, 5 Then
Allocation = "No"
End If
End Function
I have created a custom add-in with custom functions and am trying to make it user friendly for other users. By running the following macro I can add functions to different categories, but I was wondering if there was a way to do this automatically so that anyone that adds this add-in will have the functions show up in the proper category without having to manually run this macro.
View 6 Replies View RelatedMy goal is a macro that exports a .txt file where the user selects desired rows (strains, not necessarily contiguous), header columns (collection data), and a single sequence column. The output format (called fasta) is:
>headerA1 headerC1
sequence1
>headerA4 headerC4
sequence4
where each new ">" is a new strain (row). My code so far gets caught up in the string assignments in the for loops:
My question is about creating User-Defined Data Types. Is there ANY way possible i can create a User-Defined Data Type that declares a variable of another User-Defined Data Type instead of the Pre-Defined User Types like String, Integer, etc?
The following explains my problem in more detail.
I know to create a User-Defined Data Type at the top of the module before any procedures. Like this:
I can't get a simple function to work. I attached a screen shot of my function. It's very simple -- adds two numbers.
View 4 Replies View RelatedThis is what I'm trying to achieve: Display a list box (or any other appropriate form/active X control) to get input from the users which is usually a list of several terms. Once they've input the list, upon clicking 'OK' it should add them all to Col. B.
The above request WILL be a good solution, but if there is an advanced solution to this for eg., something like a list box with buttons, for instance: click on 'Articles' and it populates 'a,' 'an,' & 'the, click on 'Prepositions' and it populates all the pre-fed prepositions, etc. that would be PERFECT!
