Data Validation Using List In Another Worksheet - Works For All But One Sheet!
Dec 30, 2008
I am running into an odd issue and hope someone might be able to shed some light.
I have created several lists on one sheet in a workbook and have assigned named ranges to each individual list. So far, so good.
On various other worksheets, I have created Data Validation rules to allow users to select the relevant data from drop-down lists. (using formulas such as =List1, =List2, etc. in the Source box to capture the named ranges I had created).
Everything works perfectly...EXCEPT for one worksheet, which continues to give me the error message, "You may not use references to other worksheets or workbooks for Data Validation criteria." Can anyone explain why this error would only occur on one worksheet and work fine for all the other sheets? I'm perplexed!
View 3 Replies
ADVERTISEMENT
Jul 25, 2006
I'm using data validation to create a drop down list ina spreadsheet so that users can select from a pre-defined list. I want to be able to maintain this list in a separate worksheet, but when I try to create the list it tells me that "You may not use references to other worksheets or workbooks for Data Validation Criteria". I don't want to maintain the list in the same worksheet as there's a risk of deletion. Is there a way to create a dropdown list in a second worksheet?
View 5 Replies
View Related
Apr 22, 2008
I have a spreadsheet in Excel 2003 with many sheets all of which need to have for some columns the data entry restricted to a specific list.
To do this we have created lists defined and held in a separate sheet and then attempted to reference these from all the other sheets using Data -> Validation and then entering the relevant list in the Validation criteria.
The 1st sheet we set the Data Validation up in all is fine. The 2nd sheet however I get an error pop-up stating 'You may not use references to other worksheets or workbooks for Data Validation criteria'.
View 4 Replies
View Related
Apr 8, 2007
I have a Data Validation list in cell A1 of a worksheet called LIST. I would like to modify the macro that I have recorded, the macro uses data from various worksheets. I would like to sort out some code so that at certain points in the macro it will select the worksheet that is shown in cell A1 of the LIST sheet and then carry out the code already recorded. THis will allow me to quickly change a sheet name that is refererred to in the macro numerous times without actually manually editing the sheet name in the macro code.
View 7 Replies
View Related
Mar 26, 2009
Is it possible in data validation to have a list from other sheet? Example:my list is in Sheet of the same workbook.
View 9 Replies
View Related
Jun 2, 2009
I m using Data/Validation function in Excel2003? Is it possible to have reference list of drop down input from another sheet? I recorded the macro for this function and had the following result
Sub Macro1()
Range("A1").Select
With Selection.Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=$C$2:$C$6"
.IgnoreBlank = True
.InCellDropdown = True
.InputTitle = ""
.ErrorTitle = ""
.InputMessage = ""
.ErrorMessage = ""
.ShowInput = True
.ShowError = True
End With
End Sub
How can I change reference List from the same sheet $C$2:$C$6 to "sheet2!$C$2:$C$6" or it is a limitation for this function?
View 3 Replies
View Related
May 14, 2014
Originally I had a file with multiple tabs to sort data, this was becoming very ineffective so what I have done is modified the original WB posted into the desired new format. The WS PSM-04-03A is a vlookup based report that used to pull data from each tab based upon the WS Name (the code is still their) what I have done is combined the WS and made a column(ColumnD) for what used to be the WS Name. All WS have besides "Home" and "PSM-04-03A" have been combined into 1 WS and the title for the data from the original sheet names was added to columnD of "Recommendations" in the new file. (i.e. I did not add all files just some so you could see what I was getting at).
So using the two WBs as an example the Isomeration Unit/MEK Dewaxing Unit/ROSE Unit tabs have been combined into one tab and a new columnD added to signify what used to be done with the "tab". Now if you look at the validation on WS "PSM-04-03A" on the first WB it utilizes the WS Names to populate a list in cell A4 and cell C4 then populates with all columnA items from that WS. Now that I have combined the data I still need the validations to populate the same. So A4 in the new WB would populate with all non repeats of the unit in ColumnD of the WS "Recommendations" and then cell C4 would populate with the filtered columnA results based upon the columnD choice.
OLD FILE : (PSM-04-03) PHAR Tracking v2.xlsm
NEW FILE : (PSM-04-03) PHAR Tracking Modified.xlsm
View 2 Replies
View Related
Dec 11, 2012
I am using excel 2007
I am attempting to put a drop down list using "Data Validation". I can get it working when my list is on the same sheet (sheet 1) and the column of cells I want the drop down list to show up in....(you know..when the drop down list shows up in each individual cell)......BUT...when I put the list on another sheet (sheet 2) and try to do the "Data Validation" back on sheet 1, excel won't let me go highlight the list on sheet 2.
I even tried writing sheet2 and the range and that still doesnt work.
View 1 Replies
View Related
Oct 23, 2009
I just started using vb two days ago so the problem is probably from the code. I created a userform with 2 comboboxes and 10 textboxes, when i choose an item from the first combobox it filters out the result from the second combobox.
And when i choose an item from the 2nd combobox it shows certain textboxes corresponding to that item. Everything works fine if i run the userform while on the sheet i pull the data off of (Devices sheet), but if i try it on another sheet then the comboboxes don't work anymore.
Another question i had is if there is simpler way to view the textboxes rather than the one i used in my code. And if there's a way to autoarrange the textboxes when i they are visible so that they all are in the same row.
View 5 Replies
View Related
May 7, 2012
Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies
View Related
Feb 15, 2014
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
First Name
Surname
Paul
Smith
Paul
Jones
Tony
Phillips
View 1 Replies
View Related
Dec 3, 2006
find attached the Report file. I prepared two sheet in this file and also add my question in the file. my question is about validation selection and get data from other sheet.
View 2 Replies
View Related
Dec 10, 2006
I would like to create a drop down list. So far I have done this using Data/Valadation. I like this method alot, but would somehow like to put the data on a seperate sheet in the workbook. Data/Valadation doesn't enable this. Anyway around this?
View 4 Replies
View Related
Jun 20, 2008
I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies
View Related
Jun 15, 2007
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
View 4 Replies
View Related
Oct 28, 2011
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies
View Related
Apr 29, 2012
I have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
View 4 Replies
View Related
May 12, 2004
dear....can i set width in list box data validation (width in cell i set short).thanks
View 9 Replies
View Related
Oct 18, 2006
is there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
View 2 Replies
View Related
Dec 17, 2008
I need to get data copied from sheet1 to sheet2
depending on selection in a validation list.
The data is on the same row and all the same range.
So it would look something like this.
A B C
Fruit Orange Apple Pear
Veg Potato Carrot Onion
Animal Bear Cow Dog
I have the data in A in a dynamic range and validation list.
I need all the data copied from the specific rows ie
choose Animal from the validation list in Sheet2!A1 and
the entire row Bear Cow Dog get copied to Sheet2!B1, Sheet2!C1, Sheet2!D1.
The second problem I think is a lot more complex.
So the same scenario above but this time its a multi select on Sheet3.
I need to be able to select two (or more depending on Fruit and Animals to display in A1, A2 and then their valid options to appear in B, C and D
View 9 Replies
View Related
Jul 16, 2009
I am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
View 6 Replies
View Related
Sep 26, 2013
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
View 5 Replies
View Related
Mar 18, 2009
The idea is to create a liquor order sheet which takes items and prices from a liquor inventory workbook, which is part of the same file. i'm sure that you can do it all fancy with a macro, but unfortunately i'm not super experienced with excel. so i helped myself with what i know a bit -> drop down lists. I created an extra sheet which has 4 ranges on there... the liquor type (liquor, beer, wine), and the 3 sub classes for each type (red/white/blush/sparkling for wine, draft/import for beer and so on and so forth). On the inventory i named the range of all white wines "white", of all red wines "red" ..
On my order sheet i created a drop down list for type and created 2 more via "indirect" .. so when you select "wine" in the first one, the 2nd one will ask you for white/red/blush/sparkling and the last drop down then for the exact item according to the range on the inventory.
Hope what i did so far is understandable ^.^
Now my problem is that i want the unit cost to be copied when an item is selected. So you select "beer" in A1, "import" in A2, "corona" in A3... and the price for corona (which is written in a cell on the inventory sheet) should show up in A4.
I attached a screen of the inventory sheet so that you can see how it is structured.
View 12 Replies
View Related
Sep 9, 2009
Hello, could some one please help me with the following:
I have created a drop-down list for the range : C3:C65000 using Excel 2003 and Windows XP Pro. I did this using Excel's Data Validation Tool. The settings I used are as follows:
Allow: List
Source: =GROUPS
Check Box Ignore Blank is Ticked
Check Box In-cell dropdown is Ticked
GROUPS = GROUPS!$A$2:$A$29
Now all this works well, such that when I click in the cell range : C3:C65000, then a dropdown list appears - showing a list of all my groups.
However, when I click on any of the dropdown lists in this range, the width of the dropdown list is only as wide as the column. Column C has a width of 20.
What I need please is for the dropdown list to be as wide as the list of information showing in the dropdown list. If some one could please explain on how I can achieve this - that would be great.
View 7 Replies
View Related
Aug 29, 2008
I have a workbook that uses data validation from a list.
The same list is used in several of the individual sheets.
Can one use just one list for different sheets, as I'm having to create separate list for each sheet, which when an overall change needs to be made it is easy to miss one.
View 9 Replies
View Related
Oct 8, 2008
I would like to impose data validation on Sheet1 row A. I have a list of values in Sheet2 row A. Is their an easy way to do this?
View 3 Replies
View Related
Sep 27, 2012
How I can put a List on a separate workSHEET and refer to this worksheet when inserting a data validation list on my main worksheet?
View 4 Replies
View Related
May 28, 2014
I want to load the actual data exist in the rows by selection value from the data validation list.
E.g I have two worksheet in one excel file. One has a data activities of persons with their name like two columns i have in which one exist the name of person and second exist the activities which they perform.
On the second sheet, i made a data validation list of all the person names
Now my requirement is, when i select a person name from the list, load all the data from the 1st sheet to second sheet. Is this possible without VB code, because I want to share it on the Google sheet with my boss, where VB sheet is not supposed to work.
View 13 Replies
View Related
Jun 26, 2014
I have a cell "project titles" entered in sheet1 that populates into sheet 2 - column "Project titles".
I need to keep the values in this column unique. So can I create a data validation such a way that I won't be able to enter values into this cell that are already on the list. This way I can avoid entering duplicates.
View 3 Replies
View Related
Apr 8, 2014
I try to find a solution (with or without macro) to assign different ranges named "Failure_C..." in a data validation source depending on the value of another data validation list (32 values called)
I started in the Data Validation List Source to fill in IF function but 32 inputs are not accepted and too much caracters in the source.
The formula is starting like that:
=IF(A57=$M$78,Failure_C01,IF(A57=$M$79,Failure_C02,IF(A57=$M$80,Failure_C03,
IF(A57=$M$81,Failure_C04,IF(A57=$M$82,Failure_C05,
IF(A57=$M$83,Failure_C06,IF(A57=$M$84,Failure_C07............
View 2 Replies
View Related
