I developed a program which uses Date function in several places. Problem is that on some machine this function is not working and I'm getting compile error.
What is the reason for that. Is this a system setting??
I have the following
Private Sub Workbook_Open()
Worksheets("Sheet1"). Range("L5").Value = Date
End Sub
When i try and run the code it returns an error saying: "Compile Error, Cant Find Project Or Library" and it highlights the word "Date"
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
For which I get 'Compile Error - Expected Function or Variable'
Trring to use function edate() in VBA macro, I've activated atpvbaen.xls in Tools/Register but get compile error:"Sub or function not defined".
View 5 Replies View RelatedHave two worksheets in same workbook. First worksheet is "ReArrangedAddr" Which basically has a command button to click to run a "Sub" behind the second worksheet "Orig SH Register". When I click on button on first worksheet, I get error "Compile Error: Sub or Function not defined"
* * * * * code behind command button * * * * *
I am trying to use the Find function within some VBA code but keep encountering a compile error. Code works fine on it's own as below but doesn't work within the VBA code. I can't figure out what part of code needs to be modified.
The desired result in J2 = "Jim"
the value in cell I2 = "Jim |Anderson"
Working Function as follows:
I have a two set of Macros in a workbook. One is to create a command button on a sheet and other macro will run onece the created commond button is clicked.
Macro runs fine. Command button gets created, but when I click the command button to run another macro it gives error "Compile Error: Sub or Function not defined" highlighting the code "Call Add" at the code entered for sheet. This code is added by macro in the sheet1. I am attaching a sample file as well as codes.
Sub CreateButton()
Dim Obj As Object
Dim Code As String
Sheets("Sheet1").Select
'create button
Set Obj = ActiveSheet.OLEObjects.Add(ClassType:="Forms.CommandButton.1", _
Link:=False, DisplayAsIcon:=False, Left:=600, Top:=30, Width:=100, Height:=35)
Obj.Name = "InsertInvoiceButton"
'buttonn text
[code]....
Why do I get the below error when I open my workbook? The highlighted function is below.
Private Sub CommandButton1_Click()
Dim myText As Variant
If TextBox1.Value = "code" Then
UserForm1.Hide
Else
Me.Label1.Visible = True
Me.Label1.ForeColor = vbRed
End If
End Sub
Can someone explain the concept of defining the "Sub" to me.
View 5 Replies View RelatedI have created the following defined function in excel VBA but i get the complie error:-
'Block if without end if'
This this the code I have written for the function:-
Public Function Rule_45(Current, Previous, Result)
' RED: 'Decreasing Trend' OR 'Same' AMBER:'Increasing Trend' GREEN:'>83%'
If Result = "-" Then
Rule_45 = "-"
[Code].....
I have this code snippet..
Code:
Function appointment(ByVal day As String, ByVal hour As Integer) As String
' Insert code to return any appointment for the given day and time.
Return "appointment"
End Function
But I get this error. Compile error: Expected: end of statement
Need the right direction to stop the error 'Compile Error Expected Function or Variable' appearing. I have both of the following codes in a module. The AddNewTenancy works perfectly but the EditTenancy comes up with the following error.
Both the Userforms exist so I know it's not that.
Sub EditTenancy()
EditTenancy.Show
End Sub
Sub AddNewTenancy()
NewTenancy.Show
End Sub
i'm trying to call a function from another one, i'm getting this error 'Compiler error: = expected' but i don't know the reason, the functions simply take some values an store them in an here is the
Dim productos(19, 3) As String
Sub agregarProducto(ByVal descripcion As String, ByVal modelo As String, _
ByVal precio As String, ByVal unidad As String)
Dim r As Integer
For r = 0 To 19
If productos(r, 0) = "" Then
productos(r, 0) = descripcion
productos(r, 1) = modelo
productos(r, 2) = precio
productos(r, 3) = unidad
End If
Next
End Sub
Sub agregarProductoTelas()
Dim descripcion, modelo, precio, unidad As String
If Selection.Column = 1 Then
descripcion = Selection. Offset(0, 0).Value
modelo = Selection.Offset(0, 0).Value
precio = Selection.Offset(0, 3).Value
unidad = Selection.Offset(0, 2).Value
agregarProducto(descripcion, modelo, precio, unidad) 'error happens right here
MsgBox (descripcion)...
I'm trying to use MATCH to identify the Column number that contains "DL_Error", then I'll use this Column # to select a cell (found Column # & "34"), but I get the error shown in the title of this post.
Here's my current
Sub Macro15()
' Macro recorded 6/18/2009 by me
Range(Match("DL_ERROR", "A31:CW31", 0) & "34").Select
End Sub
I have a VBA shell script that worked just fine on another computer, but now it won't run.
The code that won't execute is:
[Code] ........
I receive: "Microsoft Visual Basic Compile error:
Sum or Function not defined" after I have run a macro. I recorded the macro.
The macro code is: ..
I get this error : Compile error : Sub or Function not defined. I found out that this might be caused by the solver not being referenced. But, this is fixed now but I still get the same error message.
I'm using Excel 2007 - Windows.
Here is the code :
Sub Macro1()
Dim i As Integer
Dim j As Integer
j = 4
For i = 1 To 4000
If ActiveSheet.Cell(i, 12).Value = 1 Then
ActiveSheet.Cell(j, 15).Value = ActiveSheet.Cell(i, 2)
[code].....
Because countif cannot be used across multiple tabs, I'm using the following workaround where "MySheets" is the range of tabs and E8 is the cell I want "counted".
=SUMPRODUCT(COUNTIF(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented"))
This works perfectly, except that I really need COUNTIFS... I want Excel to count either "Fully implemented" or "Partially implemented" when in E8. I cannot get the formula to work and keep getting an error message.
=SUMPRODUCT(COUNTIFS(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented",(INDIRECT("'"&MySheets&"'!E8"),"Partially implemented")))
I have set of data in which i want to put filter Milestones Type <> Milestone
and a filter Actual date is greater than or equal to 30 days ago and is less than or equal to today.
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
View 14 Replies View RelatedI am rewriting functions for my companies inventory spreadsheets. Excel for some reason took the item codes and formatted them into date format. Right now it is in 10/01/1902 format, and it needs to be in 10-1902 format. I've tried reformatting the cells but so far I haven't found one that works.
View 5 Replies View RelatedVB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*
[Code] .....
I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..
"Compile error - Syntax Error"
and the following line highlighted in yellow
"Sub CreateWorkbooks()"
It worked on Excel 2000 but not now and dont work either in Excel 2007.
Heres the complete code .....
I have added 3 tables data .. also I had created a sample solution calc for emp1 and project1 ... I need to calculation the ratio between the months based on the working days and allocate the efforts accordingly.
View 2 Replies View RelatedCan some see why this Code would fail intermittently?
This gets executed after a Commandbutton is selected.
The Error Message is attached.
I am using the following code to put a combo box in my userform. When I try to run it I get the following Compile Error: For without next. What does it mean and how do I fix it?
View 9 Replies View Relatedjust make some files to make my work easier. Few too many watching the game last night, and I think im lost here. Am I attempting to do too much here ? I ran the first For statement Fine, but I cant get the second to work. I dont understand where my next statement should be entered.
View 4 Replies View RelatedVBA but familiar with other programming languages.
I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.
The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.
I am new to VBA. I have been getting compile error on the below code:
Public Sub hourCalculation()
Dim rcount As Integer
Dim rindex As Integer
Dim logintime As Date
Dim logoutime As Date
[Code] ..........