I have a dynamic named range in my worksheet:
Range Name = AssignDt
RefersTo: =OFFSET('Raw Data'!$W$2,0,0, COUNTA('Raw Data'!$A:$A)-1,1)
I perform a routine in VBA which deletes unwanted rows of data from my worksheet. The problem occurs if row 2 happens to be one of those rows. It not only deletes Row 2, but it also deletes my Named Range.
I have a number of crazy defined names in my spreadsheet (1,746 to be exact). Not sure where they all came from, but I need them gone gone gone. Some of them start with squares at the front of the name and most of them refer to =#ref! or similar. I've seen a number of vba solutions to this, but none of them seem to work for me - I get "400" errors or run time errors. For reference, I'm hitting Alt F11, pasting the whole sub in, saving, then running.
View 9 Replies View RelatedI am attempting to delete external named ranges after a sheet is copied out of a source workbook (the template). I have tried both the following codes, but neither one does the trick. The code is in ThisWorkbook (not a module), and I have tried it with the code both in the template and the new doc. The new doc is where I want the names to be deleted (there are no #REF names in the template).
Deletes named ranges based on the reference to the source doc:
Code:
Sub DelRanges()
Dim nName As Name
For Each nName In Names
If InStr(1, nName.RefersTo, "='T:Fin_") > 0 Then
nName.Delete
End If
Next nName
End Sub
Deletes named ranges based on a #REF in the value of the range (this is my preferred method):
Code:
Sub DeadRanges()
Dim nName As Name
For Each nName In Names
If InStr(1, nName.Value, "#REF") Then
nName.Delete
End If
Next nName
End Sub
Doesn't happen all the time, and generally happens when a macro is run.
View 9 Replies View RelatedBasically I have the code to Delete All named ranges in active workbook, but I need it to skip over two named ranges called Categories and Length. Is there a way to adjust this to delete all named ranges in active workbook except a named range Categories and another called Length
Dim rName As Name
For Each rName In ActiveWorkbook.Names
rName.Delete
Next rName
I'm trying to delete all the Named Ranges in my excel document, but it appears there are some hidden ranges, and I can't delete them! How do you delete a range that is hidden? If I try to delete it with my code it says "That name is not valid." So I created a message box to see what the name of the range is.....and it's like 30 letters long! It starts like this..."={#N/A,#N/A, TRUE "Summary....." I woud like to attach my Excel file but it's too large. Below is my code
Sub Remove_Hidden_Names()
' Dimension variables.
Dim xName As Variant
' Loop once for each name in the workbook.
For Each xName In ActiveWorkbook.Names
If xName.Visible = True Then
xName.Delete
Else
MsgBox (xName)
xName.Delete
End If
Next xName
End Sub
I was after a bit of code to delete the range names on a particular worksheet I thought it couldn't be that hard but have only been able to find this in the archives, unfortunately I get an error when trying to execute it:
Sub Delete_My_Named_Ranges()
Dim n As Name
Dim Sht As String
' Put in name of sheet where the range is located
Sht = "Org Lookups"
For Each n In ThisWorkbook.Names
If n.RefersToRange.Worksheet.Name = Sht Then
n.Delete
End If
Next n
The error I'm getting is Run-Time error 1004, Application defined or object defined error.
I have a spreadsheet, but it came from another file using the detach sheet method. It has therefore taken with it, all the named ranges that are now superfluous.
It seems a bit long-winded to delete these named ranges one by one manually. Would there be an easy to understand script that would delete them all, so I can start with a "clean sheet".
I'm using Excel 2003.
I have a chart in a workbook that works fine by looking at the following data series:
=Workings!$A$2:$C$35
In the data series above...where the numbers are 2 and 35 I have named ranges "CHART_Start_Row" and "CHART_End_Row" which will change dynamically as appropriate and can replace these static numbers - but how do I incorporate these named ranges into the data series reference?
I need to make named ranges from an unknown number of columns(at least 1) each with an unknown number of rows. Each column has the name of the named range as the first row, and then a variable number of rows containing part numbers.
I can do it 1 by 1, but id rather do it in a loop so that blanks dont cause errors. there will be different people using versions of this sheet with different model/part number information What i've tried: Count number of colums with row 1 containing data (11 max, which is more than will ever be used) add into array(I know i dont really need to add into the array, but i might use it later for some other code). The problem i'm having is finding the range of rows that need added to the named dynamic range and adding it.
modelcount = Range("G7") 'G7 (for now) contains =COUNTA(H1,I1,J1,etc)
For i = 1 To modelcount
Redim Preserve Models(0 To i)
Models(i) = Cells(1, i + 7)
Range1 = Cells(2, i + 7).Address(xlA1)
lastRow = Cells(rows.Count, i + 7).End(xlUp).Row
Range2 = Cells(lastRow, i + 7).Address(xlA1)
Reference = Cells(2, i + 7).Address(xlA1)
ThisWorkbook.Names.Add Name:=Models(i), _
RefersTo:="=OFFSET(Reference,0,0,counta(Range1:Range2),1)", Visible:=True
Next i
This gets me the range i need, but doesnt create the named range properly. If i go to insert>names>define, the named ranges are created, but they dont relate to the data in any columns. It shows the variable names rather than the cell range the variable represents.
I need to create hundreds of named ranges going down a single sheet.
The name of the first range is in cell a1 and is 13 columns wide and 7 columns high (a1:m7)
The next name is in a8 and the range is a8:m14 and so fourth
If it's easier on a separate sheet I can have a list of names I want in column A and then the cells they refer to in column B.
E.g.
A B
Range1 Sheet1!A1:M7
Range2 Sheet1!A8:M14
Range3 Sheet1!A15:M21
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I have a named range and I want to delete the rows which have zero value in the named range.
View 6 Replies View RelatedI need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedMerge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
I have a master sheet and 102 'advisor named sheets'. The master sheet is updated daily with information (number and text) along 1 row in different columns (A:W). I would like when the advisors name is typed (W) =joebloggs! for this whole row to be auto input on joebloggs sheet. There can be multiple of these entered daily for same person, so the information would need to populate on the next row so not to type over the previous entry.
View 3 Replies View RelatedI am trying to make a UDF that searches for a header, grabs everything under the header, and pulls it somewhere else. My UDF has three parameters:
1) Output_Range: the named range where the parameters will be pulled to
2) Header: the header to search for in order to copy the data underneath it
3) WorkbookName: the name of the workbook to search in
It looks like this:
VB:
Function LoadParameters(Output_Range As Range, Header, WorkbookName As String)
MyTimer = Timer
'Defining the variables.
Dim HeaderCell, HeaderCellEnd, HeaderRange, Output_Range
[Code]....
I have some named ranges that refer to 5 pieces of data organized into a row. For example, the name MyNamedRange might refer to $C$5:$C$10.
I am trying to loop through each column and get the values in MyNamedRange, then change corresponding values in a different named range. However, when I try to use Offset to access the subsequent columns of MyNamedRange, it doesn't work. It only gets the value of the first column right, the rest return <EMPTY>.
Sample .......
How do I go about using named ranges instead of cell names(ie A4:A9)
Private Sub UserForm_Activate()
Dim lngRow As Long
Dim intIndex As Integer
UserForm1.ComboBox1.Clear 'Clear combobox
lngRow = 2 Do While Sheet1.Range("a" & lngRow).Value <> ""
For intIndex = 0 To UserForm1.ComboBox1.ListCount - 1
If UserForm1.ComboBox1.List(intIndex) = Sheet1.Range("a" & lngRow).Value
Then
Goto NextRow
End If
Next intIndex
UserForm1.ComboBox1.AddItem Sheet1.Range("a" & lngRow).Value
NextRow:
lngRow = lngRow + 1
Loop
End Sub
I wanted to change "a" to the defined range "search"?
the code to add two independent named ranges cell by cell in vba. Both of the named ranges have the same structure and the sum would be posted to a third area of the same structure cell wise.
View 7 Replies View RelatedAt the moment I have to click in the cell and then look at the cells used and look across to the title of the rows.
So for example, performance = D3*D4*D5*D6
I would like, performance = vehicles*availabliity*utilisation*TKM.
That is easy if I have just 1 option. But what if I have 3 options? Naming each cell would be a way to do it but pretty laborious, is there a 'smart' way to use named ranges here?
I'm creating a KPI spreadsheet which utilizes named ranges to allow for Dynamic charting. I've created the first data input sheet for one of the 10 areas being KPIed. The sheet has 60 named ranges in it.
The goal is to duplicate the existing sheet (Area 1A) 10 times and adjust the named ranges and formulas within the named ranges according to the sheet names.
Is there a way to accomplish this without having to manually recreate or edit every named range for each new sheet?
I want a sumIF function (based on three criteria) to fill the values of cells in a column so long as there are values in the cells in the column before that one. I was working with trying a loop, but have been shown a faster way is using the With function.
There are four named ranges that all exist on a separate sheet in the file: Crude, Location, Year and Volume. Based on the first three columns of the file I wish to have an output for the sum of volume based on crude, location and year.
Right now, my output simply returns the total sum of the "volume" range in each cell in the output column.
For example, if total sum of values in the volume column is 100 then my output column currently looks like:
100
100
100
100
etc...
Here is my code including the named ranges:
[Code] ......
I created a simply macro that will adjust the headings of a group of cells as follows.
But if I add a row/column to the sheet, it will then of course attempt to place the headings in the wrong cells.
I have now given that group of cells/range a Name of "AR_Buckets". But I'm not certain how to modify the macro to ensure it always places the information in the correct place.
[Code] ....
What is the correct syntax if I want to replace two named ranges below to Rng and Rng2 in my code?
View 5 Replies View RelatedI am having problems getting the code below to follow my intentions. I have 2 files. I have a temporary file that holds all the data that I need. I have a destination file that needs to have data copied into it. In the temp file, I have data for several dates and product types. What I intend to do is to do a vlookup in VBA to look for the date and the product type in the temp file and copy the appropriate data to the destination file. I have numerous named ranges both in my temp file and my destination file. For the code below, I wanted to make a loop to find the date in the temp file that is listed in the destination file. Once this is done, I wanted to find the product type in the temp file that is listed in the destination file. If both conditions exist, then copy a certain range from the temp file to the destination file. My intention is evident in the code, but I don’t think that I am putting in the correct “code format”.
View 9 Replies View RelatedMacro for two named ranges. I have this code, which works fine...
View 4 Replies View Related(Using Office 2003 on XP Pro) I have two named ranges that I want to union into one big named range so that I can use the big named range in a validation table. Unfortunately the big range does not appear on the list of named range so I switched to VBA to try and lick this but really I was hoping a non-VBA solution exists. Exploring possible VBA solutions, here is what I have so far:
View 6 Replies View RelatedI'm trying to make my worksheet generate a bunch of named ranges whenever it is activated. However, I'm getting a "Not a valid name" error on the line in red. The value of r is a string, so I really don't see what the issue is. Another time, I got a object defined error, but I think I've declared everyhing too. That line is very similar to the line above, and tends to work once (the first time around the loop). After that, I get the errors I mentioned.
View 4 Replies View RelatedI have two named ranges, LV1 and LV2 and wish to select them for printing. If the ranges were fixed I would use - Range("A2:H4,A8:H10").Select - how do I do the equivalent using the named ranges in vba?
View 2 Replies View Related