I have a large list of data.
Approx 10,000 rows.
All I'm looking to do is delete in each row everything after the / symbol.
So everything after a forward slash gets deleted.
All my data is in ColA from A3 downwards.
Ideally would love a macro I can assign a button to.
As an example;
info@123croieres.com/Categories/travel-and-tourism-lodging.htm
So the above after the macro run would look like;
info@123croieres.com
Have written all the code to remove various words,numbers, etc from cells but this one symbol...I can not figure it out.
It looks like this:
Its the degree symbol, however using that symbol in VBA has proved to fail me. I have a large data set that is created for import but it will continue to fail until I remove this, Find(Replace) should work right? But using a search in VBA it deletes the entire cell.
I need a code for filtering the cell's content.
What i want to filter and delete is all/any text found following after the symbol ">" .
I have a sheet that when printed out, will have 1 or more check boxes (depending on a formula) beside various items. Basically, if in a datafield it shows that there should be 3 boxes beside a line, it will show similar to this (except the O's are check boxes).
Usable 3 times per day. O O O
In the actual symbols list, there are no such symbols. I think there must be another type of symbol available as I use: ►
I grabbed that symbol from another spreadsheet, and I have no idea where it came from. I have wanted a similar arrow that points to the left or up, but I have no idea where to find them. I only know that the spreadsheet accepts a copy/paste of this symbol, and it does not seem to be related to any particular font set.
where I could find a "empty box" symbol, and also tell me where symbols like ► come from.
I need to use the following symbol (,, ▬ ) to show when my prices went up or down but when I try to use them in the VBA, they are replaced by a ?
I considered using the CHAR function, but its 255 characters do not incorporate the one I need.
I'm logging temperatures and I want to add the degree symbol "" to the end of the numbers, how do I do that? It's easy if I just use one number (#), but how do I do it when adding the lowest and highest in the same cell, e.g. 33-35?
View 9 Replies View Relatedi would like to automate the inserting of the symbol ...
i can do in a cell as the first entry, but i can't do at the end of a string's entry in a cell...?
ActiveCell.FormulaR1C1 = ""
or
ActiveCell.FormulaR1C1 = "Schukas"
I am trying to create a document and i'm not sure if this is possible or not, but i'd like to type in a number in column A (1-10) and then in column B have a symbol appear corresponding to the number.
So if i type in 5 in Column A, Column B will have 5 squares pop up (or something along those lines), etc.
I would like to count all fields which contain the symbol checkmark.
In another instance I am using the formula
=COUNTIF(B124:B137,"X") to count all fields
which contain an X.
However I don't know the reference for the symbol checkmark.
I am trying to create a custom number format that will put a plus sign in from of the value in a cell if the value is positive.
Here is what I have been using:
+#,###;-#,###;"On Forecast"
There have been a few problems with this. Firstly, the values are have two decimals, and I have not been able to adjust it accordingly. Secondly, there are some cells that contain only a zero, and the custom format above changes the zeros to 'On Forecast. Other than these two issues, that custom format works.
I am wondering if there is a symbol for "text" that I can use in a formula. I.e., =if(C="text", "", INDEX(C:C,MATCH(D16,A18:A23,0)))
View 4 Replies View RelatedI'm using a large database - excel based, with lots of VBA and macros inside - where the default decimal format is “.” (period). When I copy and paste into a normal excel workbook format I want to replace the periods with comas. The paste function I'm using is “Match Destination Formatting (M)”.
I've recorded a macro to replace all of the periods with comas - still some of the values come up as a whole number, the period not being replaced with the coma.
I've tried almost all of the formats - text, general, number .... Still does not work.
I want to show the insert symbol dialog through vba code. How?
View 12 Replies View Relatedis it possible to take a cell, and add a symbol in between every word?
for example:
cell1 = i am having a good day
desired cell1 becomes = i-am-having-a-good-day
cell2 = super awesome
desired cell2 becomes = super-awesome
i have looked into the option of using Data > Text To Columns, then using = CONCATENATE(B54,"-",C54,"-",D54) to form the string
however, since the different cells have different lengths of words, the concatenate(cell,"-",cell...) is not flexible...
For copying cell content into an other cell one can use = in the receiving cell.
Is there an equivalent symbol that will only copy the formatting into the receiving cell, without using format painter?
Can complete formatting instructions for each cell be seen somewhere, similar to the data in the formula bar?
how to add Indian currency symbol before all numbers in my excel worksheet?
View 5 Replies View RelatedData in field A1 currently appears as below.
8/10
I want to extract everything to the right of the "/" in a new field.
The formula that I am using is =RIGHT(A1,FIND("/",A1)-1)
For some reason, I am only receiving a 0 in the new field and not the 10 that I expect.
What's odd is that the formula is working as intended on every other field except this one.
I have tried to create a simple formula, but I am unable to make it work correctly. I need a * symbol in a column if the number to the left is greater than zero, and blank if left cell is also blank. My current formula that does not work displays the symbol if there is a blank or number in the left column. If this is needed, the formula A5 to the left reads another worksheet and displays a "" blank if no data.
Current formula that needs correction. B5 formula reads A5 and should enter "*" if >0 and "" blank if A5 is blank.
=IF(A5>0,"*","")
The current formula is incorrectly returning * if A5 is blank or if it has a number greater than zero. Correct formula that will return the correct results.
Quick VBA question: does anyone know how to let VBA open the Insert symbol dialog box?
View 9 Replies View RelatedIn general it looks like this: All in one column
flight 1.1
flight 1.2 paid $50 owes $100
flight 1.5 paid $80
pass paid $125
ground 1.2 flight .9
checkout flight 1.2 paid $76
I need to extract the numbers with a $ sign into a separate column. to look like this:
flight 1.1
flight 1.2 paid $50 owes $100...........50..........100
flight 1.5 paid $80...........................80
pass paid $125...............................125
ground 1.2 flight .9
checkout flight 1.2 paid $76...............76
.............. representing separate columns
Need a formula if there is one to extract from a cell only that data which is to the Right of the symbol > and to the left of the symbol (
View 3 Replies View RelatedI'm looking at some VBA code that I have to convert into another programming language and I'm having a little trouble reading it. Here's the line that's throwing me...
Application. Range("Rx_BlueMoles") = 2 * (1# - Application.Range("Rx_BlueMoisture")) * Application.Cells(i, iColDraw) / Application.Range("Rx_BlueMW")
In particular, what is "1#"?
I need to take cells such as the following from A1 down:
Baker, Helen
Brown, Joe
Smith, John
Roberts
Thompson, Karen
White, Daniel
Wright, Lisa
I need to move this to the next column but where there is a cell such as the 4th without a comma it needs to add ", N/A".
Basically it should make "Roberts" from A4 become "Roberts, N/A". I think it needs something to search for a comma and if it's not present to add that to the end.
how to make the cell be with fixed symbol or letter, means that one write 5 only as example then the cell will be 5m ??
View 3 Replies View RelatedHow to remove all the " symbol out of a string of data?
The " symbol appears at different places and i need to remove them all completely. the Find & Replace tool doesn't work because when you have say 3/4" and want it to just read 3/4 it automatically converts it to 03-Apr. even when you have changed the cell formatting to text.
I would like to insert images (like a questionmark symbol) into a spreadsheet I'm working on, and then when the user hovers the mouse over the questionmark a "help-text" pops up. I've noticed that it doesn't seem to be that simple making a tooltip, however, is it possible to replace the small red triangle that is inserted into the sheet to indicate a comment with an image?
View 14 Replies View RelatedMy current issue is that I need to enter a $ into multiple formulas before cell numbers without having to do it manually, is there a way to do this? I cannot drag the cell across with the $ already entered as this will change the cell reference in an adjacent cell.
If this is not clear, what my scenario is that I have a 250 x 2500 cell table. Going across the x axis the formula is: J2-AVERAGE(J$2:J$11) then the next cell K2-AVERAGE(K$2:K$11) and so on. I now want a $ to appear before J and K without having to manually insert $ into every formula, so that I can drag the columns down varying the column number.
If we mouse click any cell (right/left) it put √ symbol in that cell... How can I do it?
View 2 Replies View RelatedI'm writing some VB in an Excel macro to search and replace a string of text.
The problem is that the string contains the " symbol, so when Access gets to that symbol it thinks that it's reached the end of the string.
e.g.
I want to replace "0519","863027" (including the quotes) with "0001","863027"
This is what the code looks like, but it obviously doesn't work :
Is there a way to define the end of a cell in a find/replace? I.e. I want to find characters like this:
;;[space character][end of cell]
and replace with
[end of cell]
(that is just delete the ;;[space character] bit when it is followed by end of cell)