How to remove all the " symbol out of a string of data?
The " symbol appears at different places and i need to remove them all completely. the Find & Replace tool doesn't work because when you have say 3/4" and want it to just read 3/4 it automatically converts it to 03-Apr. even when you have changed the cell formatting to text.
How I can Removing the Black cells in list in data validation ?
View 1 Replies View RelatedI have a long list of values in column F of my worksheet. These values appear in random rows for example: cell F3 is 27, cell F9 is 7, cell F13 is 27, cell F20 is 9 ... The data is not evenly spaced any specific number of rows apart, but there are spaces (rows which are blank in column F).
I would like to put all of these values in column G but without any blank cells, and keep the order the same as well. So using the above example, Id like a way to make cell G1 read 27, G2 read 7, G3 read 27, G4 read 9.
Column F could be a very long column im not sure exactly how long as the data is being put in periodically. Some sort of formula that I could just drag down that would read the values from column F and put them in column G with no places would be ideal.
Lets say I have a column, and i have some dates in that column. between each date entry are blank cells, an undetermined ammount.
ie:
------------
column1
------------
(blank)
1/1/2007
(blank)
(blank)
(blank)
2/5/2007
(blank)
(blank)
3/7/2007
(blank)
... etc ...
I would like some type of array formula, that could
agegrate that whole column into a new column, removing the blank cells.
so the new column would be:
--------
Column2
--------
1/1/2007
2/5/2007
3/7/2007
I was thinking something like... but this doesnt get rid of the blanks...
(this is using google spreadsheet, but ARRAYFORMULA, is the same as hitting "CTRL-ENTER" - in excel.
=ARRAYFORMULA(if(isnumber(A9:A17),A9:A17,0))
how to make the cell be with fixed symbol or letter, means that one write 5 only as example then the cell will be 5m ??
View 3 Replies View RelatedMy current issue is that I need to enter a $ into multiple formulas before cell numbers without having to do it manually, is there a way to do this? I cannot drag the cell across with the $ already entered as this will change the cell reference in an adjacent cell.
If this is not clear, what my scenario is that I have a 250 x 2500 cell table. Going across the x axis the formula is: J2-AVERAGE(J$2:J$11) then the next cell K2-AVERAGE(K$2:K$11) and so on. I now want a $ to appear before J and K without having to manually insert $ into every formula, so that I can drag the columns down varying the column number.
The code brings up the message box the way I need it to
At the bottom of the code in the standard module is what I changed.
In the message box. If the GDT button is clicked the GDT chart opens. If the Symbol button is clicked the Symbol chart opens. This all works.
But will I select a symbol from the symbols chart it will appear in the cell that is double clicked. but then end up as a letter instead of a symbol.
But, the gdt chart works perfect.
I thought Cancel = True Would do the trick but does not. Any ideas what is missing??
This code below is in the sheet module
Private Sub Worksheet_BeforeDoubleClicK(ByVal Target As range, Cancel As Boolean)
ThisWorkbook.Unprotect
ActiveSheet.Unprotect
With Application
Cancel = True............
In general it looks like this: All in one column
flight 1.1
flight 1.2 paid $50 owes $100
flight 1.5 paid $80
pass paid $125
ground 1.2 flight .9
checkout flight 1.2 paid $76
I need to extract the numbers with a $ sign into a separate column. to look like this:
flight 1.1
flight 1.2 paid $50 owes $100...........50..........100
flight 1.5 paid $80...........................80
pass paid $125...............................125
ground 1.2 flight .9
checkout flight 1.2 paid $76...............76
.............. representing separate columns
I am trying to do some automatic formating of a list of data. I can accomplish 90% of what I would like to do via a simple keystroke record macro. What I cannot do is shift the contents of Column B based on the contents of Column A. Column B will have to be shifted to the right 1, 2, 3 . . . cells. Below is an example. Column A symbols as it relates to number of cells to shift Column B
Symbol......Amount of shift
-[-]..........0
--( ).........1
--[-].........1
---( )........2
---[-]........2
----( ).......3
I have included a sample .xls showing the Original Data and the Desired Output
Creating a project tracking sheet that is as automted as possible so that people dont have to populate lots. I have managed to get it to create a new sheet and populate according to a filled out combobox. The user then populates a 'milestone' section. When a button is clicked these are transferred to a GANTT chart type sheet and pasted. Before they are pasted the macro checks if the project title exists, if it does not it first pastes the title LEFT INDENTED. Then follows by pasting the milestones CENTRED. If the title exists, it inserts the milestones under the project title by copying and pasting all milestones. Hence, if milestones are regularly added, it will begin to add duplicates of the same milestone. I need to remove these. I would usually be able to do this however there is often the same milestone in numerous projects which I CANNOT remove as it would loose data. I would like a code that says between the cell I was searching for (Rng) and the next cell which is also left indented to remove duplicates. Basically I can't use x1enddown because it needs to stop at the next cell which has the same formatting... i.e. only duplicates to be removed out of the cells which are centred. I would then like it to repear this action for the whole document and move the next left indented cell and do the same.
It feels like a kind of backward conditional formatting is what I am looking for
Here is my code as it stands
Dim FindString As String
Dim Rng As Range
FindString = Range("D2").Value
If Trim(FindString) <> "" Then
[Code]....
i am removing cell contents using fallowing code
Private Sub CommandButton1_Click()
Dim row, col
row = ActiveSheet.UsedRange.Rows.Count
col = ActiveSheet.UsedRange.Columns.Count
For i = 1 To row
For j = 1 To col
Cells(i, j).celarContetents
Next
Next
End Sub
but next time the cell count is showing previous rows value?
I've put together a macro to format an extract from a fuel report but at the end of it I need to remove numbers in front of drivers names.
E.g.
1. John smith
10. Joe bloggs
123. Peter piper
Should end up as
John smith
Joe blogs
Peter piper
All without the number, full stop and the space before the name.
I have a column of numbers that are in sets of 3. (123 456 789) I need to remove these spaces and just see 123456789.
View 3 Replies View RelatedI have a excel sheet and inside certin cell are vales of "0". I would like to delete those 0 but keep the other values I have around them. Is there any way to delete only the "0" without going cell by cell by cell?
View 3 Replies View RelatedI have inherited a spreadsheet that had check boxes in it. I don't want to use them. I was able to delete all but 4. I can't figure out how to get them removed.
View 4 Replies View RelatedI have a lists of e-mail address (up to 15 rows long) in adjacent columns.
At times one or more addresses need to be removed. After removal I need the list to 'bunch up' so that the space caused by the now blank cell is removed.
At the moment I am doing this with vba as follows:
Sub Clear_Blanks()
With Range("e13:e27")
. AutoFilter
.AutoFilter Field:=1, Criteria1:="<>"
.Copy Range("e35")
.AutoFilter
.ClearContents
End With
Range("e35:e49").Cut Range("e13")
End Sub...
I have a spreadsheet which reads:
A1 E012345678
A2 126789433
A3 ABCDEFGH
A4 CDEEGFFH
A5 E0456783
A6 98765432
etc.
I need only the the data in Cells A1 A5 etc. which means the 3 cells below (A2, A3, A4 ) should be deleted. A5 I need the data, and then A6, A7, A8 I do not need ... A9 need and so on.
the data should be in in one below the next with no spaces in between.
Data is only in column A.
I have imported data and it shows "Check 1234". How can I use a formula to remove "check" from this cell?
View 3 Replies View RelatedI have been sent a spreadsheet that was populated from another system. I need to run some VLOOKUPS but the cell that I need to compare has a ' in front of the text/number eg 'VB123456. I have found a thread on how to remove it for a number but it does not work with letters.
View 6 Replies View RelatedE122112 David Hall
Robert Townsend
Micheal Keel
Tanya Smith
Elizabeth Charles
E004587 Andrea Tummings
The problem is for those names that come thorugh with the Letter and than the number...I don't need the names like that....I would like a Macro that would look at each cell in column A and remove that from those selected cells. I would like my result to look like this...
David Hall
Robert Townsend
Micheal Keel
Tanya Smith
Elizabeth Charles
Andrea Tummings
I have a bunch of cells that have City and Zip Code combinations.
Ex: Chicago 606
Fayettville 72701
SACRAMENTO 95691
Some of them are 3 digit zips and others are 5 digits. I just want to weed out anything with a number leaving the city names.
How do I shift all the cells up labelled data, so that there are no blank rows in between? I tried using the ones found on the forum via search but it is stuck in an infinite loop.
View 5 Replies View RelatedI have a combination chart with data from Sun thru Sat (7 days). My manager wants to display only the weekday data (M,T,W,Th,F) and remove the weekend data (Sat,Sun). However, I also need this data to be included in other charts I need. I was thinking in years past, that I was able to remove specific data from the chart directly without having to alter or change the spreadsheet data? I have copied a second set of data and hid the weekend data, however, I have gaps in the data, which I need to remove in the chart display. Not sure what to do, or the best avenue?
View 2 Replies View RelatedI have a spreadsheet where members of my team can run filters to view stats.
On close I have a basic script to remove all filters and show all cells to keep it consistent for the next user
VB:
Private Sub Worksheet_Deactivate()ActiveSheet.ShowAllData
End Sub
However, If i open the spreadsheet and don't run a filter when I go to close it debugs as alldata is already shown.
Any work around to keep the existing code working but to not error if all data is shown?
I have a column that is filled with various car brands that a dealership might sell. The data in the cell may look like CHRYSLER; CHRYSLER; CHRYSLER which I would want to just say CHRYSLER. If the cell says CHRYSLER; FORD; CHRYSLER; FORD I want it to just say CHRYSLER; FORD.
View 1 Replies View RelatedI'm compiling several old worksheets into a single database for a research study. The worksheets contain patient data. Some of the worksheets have the patient's last name, first name, and middle initial entered all in one cell like this: Smith,John R. Compounding the problem is the fact that sometimes the name is entered with a space between the comma and the first name, sometimes not.
I have formulas to break the name out into three separate columns "lName, "fName", "midInit". However, if the name in the original cell has a space between the coma and the first name, then the “fname” column will contain a blank space in front of the name. This is problem because patients names can appear in the database more than once. Some patients are in the database several times.
If patient “John R. Smith”, for example, is entered in the database as”
“Smith” “John” “R “
and also as
“Smith” “<space>John” “R”
then the database won’t recognize them as the same name when I search for John Smith’s data. Right?
If so, then I need a way to eliminate the empty spaces in front of the first names. Like I said, some have empty spaces and some don’t. I could do this by hand, but there are over 1000 entries in these worksheets.
I am creating a formula. The formula needs to be something like this:
[Code]...
Basically, I need the formula to read the value in cell A and if it is a "1" then the value in Cell G will remain, all other values in cell A will erase the values in cell G.
This is my first post on this forum and I am an Excel novice. I have a worksheet with lots of blank cells and I need to shift all the cells with data all the way to the left (to column A). I cannot get the sort or filter functions to do this for me, and I've never used macros but it appears they might be useful for my problem. I'd like to find an automatic process to move the data left rather than drag and drop hundreds of times. I'm attaching the complete xls file for your viewing.
View 5 Replies View RelatedI have problems with dynamically adding and removing checkboxes. I have a form and there is a button to add more rows to the table. Every row includes a checkbox too.
So first i add a row, and then add a checkbox to a specified cell in that row.There is a button for removing rows as well (witch should removes checkboxes as well).
My problem is when i ad the checkbox the linked cell property only works for the first one.When i add the second row the linked cell of the firstly added checkbox changes to the one in the new row and the new checkbox has no linked cell. I am adding the stuffs as follows:
VB:
Private Sub addBtn_Click()
Dim y As Integer
y = findFunc("end") // Y define where To insert the New row
Cells(y, 11).EntireRow.Insert
Cells(8, 11).Copy
[Code] .....
Any way to add checkboxes dynamically.
I have an Excel file with several worksheets and each of those worksheets has over 600 rows (a list of employees) and above or under 30 columns. Most of cells have trailing spaces in them and they vary in length. For example:
B5: "Jacobson "
C5: "jacobson@jacobson.org "
(Seems like it's not allowing me to post long gaps between the last letters and the "
I'm aware of the TRIM function and know that I could at least get a column or a few copied with the spaces removed. However, it would just take so much time. What would be the most efficient way of getting rid of all the trailing spaces in all the cells in all the columns in all the worksheets?
