I save a workbook, the location where I were last (ex cell Z42) is also saved and upon re-opening it again, it opens the sheet to the last location (Z42). So how could I make the workbook and all its worksheets to open at a defined location. ie. A1 for instance.
View 6 RepliesI would like to create a button on a toolbar to save my spreadsheet in 2 locations (always going to be the same, just the file name will change).
View 5 Replies View RelatedIn the attached sheet in module5 I have a save macro with this code
HTML Code:
ActiveWorkbook.SaveAs Filename:="D:Picking Logs" & _
Replace(sFile, "/", "-"), FileFormat:=52
-This saves it to my computers D drive and works fine.
Then I also have the following code whice is suppose to save it to the public drive which is U: drive, but this computer does not have direct access that that drive so i save it to
HTML Code:
ActiveWorkbook.SaveAs Filename:="wcrsan1
owley public1 picking logs" & _
Replace(sFile, "/", "-"), FileFormat:=52
-The wcrsan1 is the path i use to save it to th U:drive.
My issue is the code runs fine, but it does not save it to wcrsan1 owley public1 picking logs. If i save it manually it works but not when the macro runs it.
VBA is password protected.. The password is Kayley98 the sheet password is go
ho.xlsm
I have the following code which saves my worksheet with a name extracted from particular cells:
Public Sub SaveAsMaximoWO()
ThisFile = Range("AC5").Value
ThisFile2 = Range("E3").Value
saveName = ThisFile & " - " & ThisFile2
ActiveWorkbook.SaveAs Filename:=saveName
End Sub
This (for reasons I don't understand) saves the file to My Documents by default.
What I would like it to do is save to another folder within my documents as default.
I am using this code in my ThisWorkbook, but it keeps coming back as an error for
ActiveWorkbook.SaveAs Filename:=ThisFile
Private Sub Workbook_BeforeClose(Cancel As Boolean)
'Saves file as what is in cell "C7" to specified network location - variant below
Dim Location, ThisFile As String
Location = "\Office-pcpublicCustomers"
ThisFile = Range("C7") & Format(Now(), "dd/mm/yy")
ThisFile = Location + ThisFile
ActiveWorkbook.SaveAs Filename:=ThisFile
End Sub
way to construct my save file so that it saves to the correct location.
I have a a FileSearch that lookings in a specific Folder and the sub folders for a file type and then saves them to a different location. Here is the location of the save in regards to the original location...
Filesearch folder= C:path
Savefolder=C:path he folder its found in & " excel converted"
If that makes any sense, basically I need to call the path of the file I opened, but not including the file name.
I am currently having a slightly annoying issue that only happens 50% of the time, that when trying to re-save a excel sheet on a network location. The network location is a folder on another computer. The same happens when I try and save it as a pdf, but only happens half of the time.
The message which pops up says something along the line of 'Saving as: 'File-ServerDocumentsexcelsheetexample.xls' ' and a sort of green loading bar appears. It does this for about 15 seconds then goes off.
I've checked our anti virus (which is eset) and I've set it to not real time scan network locations.
I have attached a example of the saving message: ExcelWarningExample.jpg
I have an issue with saving the file at the desired location below is the code i have currently used . I have given the destination as "D:New folder". The new file does get saved at location "D:" but not inside the "D:New folder", instead names the file as "New folder".
View 3 Replies View RelatedIs it possible to use a macro like the one below, and have the second location save with the date / time stamp in the name? This is what I need to accomplish: I have a few folks that need to make changes to a master spreadsheet daily. The spreadsheet is in a Network share that when modified and saved, will save to that network share, but also locally. Can the second location have the date/time stamp added to the name of the file so that I know when the changes were made and have an audit trail ? This will also keep a copy of the last modified file in case the spreadsheet is corrupted. Here is what I have for saving to 2 locations:
View 3 Replies View RelatedI am trying to code a macro call where in once the file is saved with the current week start date all the other macro's should be disabled. Since am having lot of data and report sheets which needs to be added and deleted in the run. It causes me problem when I try to open it again to view the results. For example I have a sheet named apple and another one applereport. I have made my code to delete apple since it is a data sheet. I want apple report to have all the other macros disabled once its been renamed to week start date for now it is 16 Mon 2007.
View 3 Replies View RelatedI made the following code to merge 2 workbooks together.
The code is to be executed when the user has Workbook A opened. (All sheets in workbook KPISWD are supposed to be moved after all worksheets in workbook KPICustomers).
I keep getting a debug error on the code that is supposed to do the actual move and loop until it is finished with all of the sheets in Workbook B.
Code:
Dim KPICustomers, KPISWD As String
KPICustomers = ActiveWorkbook.Name
Workbooks.Open Filename:= _
"W:FacturatieKPI per periode SWD.xls"
KPISWD = ActiveWorkbook.Name
[Code] ..........
I have the below code, which now looks to see if a file is open or not, if it is, then copy and past 'Data' and if not open the book and copy 'Data'.
I think the code is sort of right, but im missing something, as i keep getting runtime error when i try and copy. Here is the
Sub PrintSaveKPIUpdate()
Dim sFilName As String
sFilName = "C: estCashSales_KPI.xls"
Set Main = ThisWorkbook
If IsOpen(sFilName) Then
' Book is Open.
Worksheets("Setup Data"). Range("Data").Activate
i have done a search on this topic and found many similar answers to many similar questions. All specify using Application.Run "workbookname.xls!macroname".
In my code, the filename has an assigned value as the master code goes out to many secondary files - the user selects the particular one they want at the start of the macro. The variable assigned is called "UpdateKAMsFile".
how do i get the macro called KAMsRandomColour to run in the workbook designated by UpdateKAMsFile?
so to start off im not able to attach things due to security reasons, what i need is either 1 of 2 macros. if its possible, both are related. one possible is as follows: i need it to go through a certain column (say I for example) and look at the information in it, this information can vary from peoples names along with dates and other stuff, i want it to look through these and if anything has a date today and prior i need the cell to be highlighted. problem is sometimes it might have 2 dates, or no dates. it should have todays date, their name, other information, and future date of something. but not everyone does, this is the macro i dont think that can exists.
2nd macro possibility the other macro uses the first sheet, AFTER been highlighted, normally by hand, and takes it to another workbook and puts in in certain spots. so the first sheet has names of everyone in column K. what i need is it to look at column I and if its highlighted take entire row to other book, and put into sheet under the person name in their tab. the second book has a tab for each person (at this time 18 tabs) which can fluxuate, and each tab is the persons first and last name, without spaces. since when i put sums on main page it didnt want to work with the spaces i had to omit them. again im not sure this is possible.
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow.
simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
I would like to know if there is a way to copy a spreadsheet and paste it into a new tab on another spreadsheet. We currently download 2 lots of spreadsheets from SAP and would like to create another spreadsheet to act as a 'central' preadsheet. What I would like to happen is that the data from the 2 downloaded spreadsheets will be automatically pasted into 2 new tabs on the central spreadsheet, then run some formatting macros (which I can do fine).
View 3 Replies View RelatedI have a spreadsheet that imports data, manipulates it then deletes 2 of the sheets then saves the file under a different name to the network. Is there any way to save this new worksheet without it storing the macros - so when the user open it, only the data is there and they get no prompt to enable macros?
View 6 Replies View RelatedI have created a form in a worksheet which I have added questions too and then locked all cells except the ones where I want the answers in.
I have then added a button to the bottom of the sheet called "Print and Save". This work sheet is called "form"
On a second sheet called "database", I have all the titles of the questions running from a -> k and nother else.
What I want to happen is the user input the information on "form" into the boxes available. Once they have completed the questions, I want them to be able to click on "Print and Save" so that firstly the page "form" prints, and then for all of the answers to be saved in "database" below the titles for each question.
I have had a play, but just don't know where to start. Also, once there is a row of questions below the titles, I don't want it to overwrite information already there, it needs to go onto the next empty row available.
Attached is my excel file.
You will see in the code that I have the code for printing.. I just found this on the net and it seems to work fine for me.
I have a large amount of data on NBA teams and players that is extracted from external web pages. In order to have the data shown on separate sheets to do comparisons I have to use many array formulas and from what I have read that takes up a large amount of memory. I'm now at the point where I'm receiving a message that says "Excel cannot complete this task with available resources" when I open the workbook.
Is there any plausible way that I can resolve this situation? I have thought about converting the lookup formulas from arrays (index/match) to vlookups and hlookups.
I'm not as advanced with using Excel as most of you, and I realize I may be at a point to where I will need to use different software to analyze my data, but I would prefer to stick with Excel as it would be difficult to start from scratch and learn how to use a different program.
I am looking some suggestions for a good book i can buy online to learn about writing VBA for excel. I find this forum very useful for help on solutions to write VBA code but i would like to learn the basics so i can understand what it is i am adding into my excel files. Moderators... If this breaks the forum rules (i've read them and can't see anything).
View 3 Replies View RelatedI Have been working on a spreadsheet for attendance recording. I will be keeping a new one for each month. I need to be able to take accumulated data from one book and put it in the new one. I have the Following
View 2 Replies View RelatedWhat do I need to do to get my vlookup formulas to look into another workbook(or excel file) without having to open it up.
Here is a sample of formula that I have:
[=IF(C13="","",VLOOKUP(C13,Data,21,))]
I have data like this:
Sammi Alvarez-Vegan
1201 E. Ponce De Leon Blvd.
Coral Gables, FL 33134
Angie Penns
6870 SW 44th Street
Building G28- #110
Miami, FL 33155
Some names and addresses are 3 lines and some are 4 lines. All have a blank line between. There is a double blank between different name blocks.
I tried to Concatenate so all parts would be in B1 cell. =A1&","&A2&","&A3&","&A4&","&A5&","&A6&","&A7
That did what I wanted for B1, and when I copied it down, B2:B8 was part of an address.
It was not until B9 did the actual next name come into play.
I know there must be a better way
I am using WindowsXP and Excel2007
I am generating Excel reports (with different names) using VBA. The problem I'm having is that for a certain macro, it needs to create a new book, and then activate the original window. But because all the new reports have new names (but using same macros), the name written in code doesn't equal the book's new name. How can I set a variable to be the book name? I do know that the name of the original book will be equal to two letters plus the value in A7. The problem is this: I have written a macro that shows the following
Worksheets("Sheet2").Select
Workbooks.Add
Windows("FT Bi Test.xls").Activate
I need something more like this (though this exact code doesn't work):
Worksheets("Sheet2").Select
Workbooks.Add
Windows("FT " & Range("A7").Value ".xls").Activate
Or something like this:
Worksheets("Sheet2").Select
Workbooks.Add
Windows("FT " & Variable ".xls").Activate
I have only the basic knowledge of the VBA programming. Are there any books you can recommend?
View 2 Replies View Relatedhow to get excel to open a work book in my c drive if i have given it the location in cell m2
eg: the cell is M2
C:AVERAGE PRICE (update 2009) 240809
i need the macro to open this workbook when i click the button in the workbook i have open that has the above in cell M2
I have a workbook with two worksheets. I have an "E-Mail" button within the workbook that, when clicked, emails the entire workbook (using Outlook). The button essentially triggers a macro that makes a copy of the file, opens the dupilcate, mails it, then deletes the duplicate ... all the while the original is still open and not changed at all.
Everything works fine, however I would like to know if there's a way to have the "E-mail" button to just email one of the worksheets. For example, I have two worksheets entitled "WFS" and "CAR". When the email button is clicked, I would like to only have the "CAR" sheet emailed. Here's the code I currently have in place:
I have a workbook that contains two worksheets. The columns are the same between the two, column A is the Employee ID in both worksheets. The other column headings are: Name, address1, address2, city, state, zip, EmgerName, EmgerType, Cell, Address1, Address2, City, State, Zip.
What I'm looking to do is compare WS1 with WS2 and in WS2, what ever is different from WS1, the font color changes to RED. For example let say for employee number 1234, everything is the same expect for EmgerName and Cell, then these fonts are changed to RED in WS2 so I can identify them quickly.
Hi everybody, I'm doing my first excel application program and everything is going good,
but I have one problem.
I want to click on a command button in one workbook that is supposed to lead me to a specific sheet in another workbook and to close the first workbook.
I used the following ....
This is the error i get by doing> edit> move or copy sheet
A formula or sheet you want to move or copy contains the name 'HTML', which already exists on the detination worksheet. Do you want to use this version of the name?
I want to do is copy a sheet into the same book. If I click yes, two more errors pop up.