Sheet Not Saving To Location
Feb 3, 2014
In the attached sheet in module5 I have a save macro with this code
HTML Code:
ActiveWorkbook.SaveAs Filename:="D:Picking Logs" & _
Replace(sFile, "/", "-"), FileFormat:=52
-This saves it to my computers D drive and works fine.
Then I also have the following code whice is suppose to save it to the public drive which is U: drive, but this computer does not have direct access that that drive so i save it to
HTML Code:
ActiveWorkbook.SaveAs Filename:="wcrsan1
owley public1 picking logs" & _
Replace(sFile, "/", "-"), FileFormat:=52
-The wcrsan1 is the path i use to save it to th U:drive.
My issue is the code runs fine, but it does not save it to wcrsan1 owley public1 picking logs. If i save it manually it works but not when the macro runs it.
VBA is password protected.. The password is Kayley98 the sheet password is go
ho.xlsm
View 2 Replies
ADVERTISEMENT
Mar 21, 2014
I am currently having a slightly annoying issue that only happens 50% of the time, that when trying to re-save a excel sheet on a network location. The network location is a folder on another computer. The same happens when I try and save it as a pdf, but only happens half of the time.
The message which pops up says something along the line of 'Saving as: 'File-ServerDocumentsexcelsheetexample.xls' ' and a sort of green loading bar appears. It does this for about 15 seconds then goes off.
I've checked our anti virus (which is eset) and I've set it to not real time scan network locations.
I have attached a example of the saving message: ExcelWarningExample.jpg
View 2 Replies
View Related
Jul 22, 2006
I would like to create a button on a toolbar to save my spreadsheet in 2 locations (always going to be the same, just the file name will change).
View 5 Replies
View Related
Sep 25, 2006
I have the following code which saves my worksheet with a name extracted from particular cells:
Public Sub SaveAsMaximoWO()
ThisFile = Range("AC5").Value
ThisFile2 = Range("E3").Value
saveName = ThisFile & " - " & ThisFile2
ActiveWorkbook.SaveAs Filename:=saveName
End Sub
This (for reasons I don't understand) saves the file to My Documents by default.
What I would like it to do is save to another folder within my documents as default.
View 14 Replies
View Related
Dec 20, 2008
I am using this code in my ThisWorkbook, but it keeps coming back as an error for
ActiveWorkbook.SaveAs Filename:=ThisFile
Private Sub Workbook_BeforeClose(Cancel As Boolean)
'Saves file as what is in cell "C7" to specified network location - variant below
Dim Location, ThisFile As String
Location = "\Office-pcpublicCustomers"
ThisFile = Range("C7") & Format(Now(), "dd/mm/yy")
ThisFile = Location + ThisFile
ActiveWorkbook.SaveAs Filename:=ThisFile
End Sub
View 9 Replies
View Related
Apr 12, 2007
way to construct my save file so that it saves to the correct location.
I have a a FileSearch that lookings in a specific Folder and the sub folders for a file type and then saves them to a different location. Here is the location of the save in regards to the original location...
Filesearch folder= C:path
Savefolder=C:path he folder its found in & " excel converted"
If that makes any sense, basically I need to call the path of the file I opened, but not including the file name.
View 4 Replies
View Related
Jan 6, 2010
I save a workbook, the location where I were last (ex cell Z42) is also saved and upon re-opening it again, it opens the sheet to the last location (Z42). So how could I make the workbook and all its worksheets to open at a defined location. ie. A1 for instance.
View 6 Replies
View Related
Jul 1, 2014
I have an issue with saving the file at the desired location below is the code i have currently used . I have given the destination as "D:New folder". The new file does get saved at location "D:" but not inside the "D:New folder", instead names the file as "New folder".
View 3 Replies
View Related
Aug 29, 2009
Is it possible to use a macro like the one below, and have the second location save with the date / time stamp in the name? This is what I need to accomplish: I have a few folks that need to make changes to a master spreadsheet daily. The spreadsheet is in a Network share that when modified and saved, will save to that network share, but also locally. Can the second location have the date/time stamp added to the name of the file so that I know when the changes were made and have an audit trail ? This will also keep a copy of the last modified file in case the spreadsheet is corrupted. Here is what I have for saving to 2 locations:
View 3 Replies
View Related
Apr 27, 2006
How can I freeze a sheet's tab location so it doesn't roll off of the screen? I have a workbook with 30 worksheets all hyperlinked off of the 1st sheet which is the INDEX sheet. The INDEX sheet only exists to make it easier for users to go directly to their desired sheet without tabbing horizontally through many sheet names. However when users use the bottom left arrow buttons to tab through the worksheets, the leftmost INDEX worksheet tab scrolls off of their screen. I realize that they can right click on the left/right tabbing arrows to see a list of all worksheet names, but it would be nice if the INDEX worksheet tab never rolled off of the horizontal tab scroll bar.
View 2 Replies
View Related
Jun 3, 2014
I have a table with customers and their addresses (sheet2) and I need to find their GPS locations in sheet1.
I guess the logic would need to be something like this:
find CityName and StreetName in sheet1 where StreetNo is between minStreetNo and maxStreetNo return GPS X and GPS Y
with the formula or VBA code?
Example.xlsx
View 2 Replies
View Related
Jul 8, 2006
if it is possible to save just one sheet out of a workbook. I suppose it would save as a whole new workbook with just that one sheet, which is fine.. but is there a command that does this?
View 9 Replies
View Related
Nov 19, 2009
I have a excel sheet which is completely formula driven and no macros in that.
I want to macro which can save that excel sheet to a specific location.
View 9 Replies
View Related
Oct 6, 2009
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow.
simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
View 6 Replies
View Related
May 26, 2013
I got a problem saving an Excel Sheet as PDF. The problem is that i cant see some parts of sheet on the PDF file. I have uploaded 2 files one of which is that .xlsx file which i want to save as PDF, the other is the PDF file that i see after saving which is not desirable.
View 1 Replies
View Related
Jan 27, 2012
I've got a macro that generates some parameters and after they have been generated, the values have to be saved in text file. The problem that I'm facing is that the text file saves the values in double quotes.
I've been searching online for a solution to the problem and what I've found is that if the cell value in excel includes a comma, the resultant text file will store the entire value in double quotes.
I'm using the save as method and I read that if you provide the save format as xlTextPrinter this problem will not occur, but the limitation is that it can only work with values less than 240 characters in length.
View 5 Replies
View Related
Aug 11, 2009
I am working on a project for work and my first tab is titled "Directions". I have over 500 users coming in and edit multiple tabs at the same time. Is there a macro/or option that would after a user saves changes, would return to the first tab "directions" so that my other users wont be in the middle of what the last person edited?
View 9 Replies
View Related
Mar 14, 2013
All I want to do is save a copy of one sheet called "Patient Stock Form", change the name to "Patient Order", and put it into an email. But my code is putting the entire workbook into the email. Here's the code:
VB:
Sub EMAILFORM()
Dim oApp As Object ' Outlook.Application
Dim oEmail As Object ' MailItem
[Code]....
View 8 Replies
View Related
Oct 21, 2008
I am trying to write code which copies the activesheet (called "Data"), opens a new workbook, pastes the data into it and closes the new sheet as "sales 2008" followed by the date. What I have at the moment is:
View 3 Replies
View Related
Dec 2, 2011
I would like code to automatically save my spreadsheet with the name that is present in cell F4 of the activesheet. For example, I would like to save my file to desktop and cell F4 contains the text 'hitec 348'
View 5 Replies
View Related
Jun 18, 2008
I have a workbook with sheets of data that should be imported into another system. So i would like some code that does the following:
1.) make a copy of worksheet x and paste (paste special) the values in a new worksheet.
2.) Delete row 1 in new worksheet (the labels)
3.) Ask the user for a file name and path and save the worksheet as a tab delimited txt file.
4.) Delete the worksheet created in 1.)
5.) Leave the user with the original .xls file
I will assign this macro to a button so the experience for the user is:
1.) press button
2.) input file name and location and have a text file saved
3.) be left in the original xls document.
I tried with the following code but get stuck with this error : "Run-time error 91: Objeck variable or with block variable not set."
Sub Export_x_DK()
Dim w As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
ThisWorkbook.Sheets.Add After:=Sheets(Sheets.Count)
ActiveSheet.Name = "Export_2023"
Sheets("Depreciation x (DK)").Select
Cells.Select.........................
View 2 Replies
View Related
Oct 11, 2006
I have been trying to create a macro in excel to chart a selection of data and to output the chart on the active sheet where the data was taken (as opposed to a named sheet). So basically, I have about 300 worksheets with data, and I would like to have a button on each page that automatically charts that data when clicked, and outputs the chart to the page where the macro was clicked. However, I have not been able to figure out a relative reference that will allow me to make the LocationasObject reference simply the ActiveSheet as opposed to a specifically named sheet. See my code below, which references an output to a worksheet called "Charts". Right now, all of my charts are outputting to the sheet called "Charts", as opposed to the active sheet.
Sub ConsDiscChart()
ActiveCell.Offset(29, 11).Range("A1").Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlDown).Select
ActiveCell.Offset(0, 1).Range("A1:B1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Offset(0, -1).Range("A1:C24").Select
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.Location Where:=xlLocationAsObject, Name:="Charts"
With ActiveChart
.HasTitle = False
.Axes(xlCategory, xlPrimary).HasTitle = False
.Axes(xlValue, xlPrimary).HasTitle = False
End With
End Sub
View 5 Replies
View Related
Mar 24, 2014
I want two sheets of my Excel workbook to be saved as txt file. The name of the file is compiled of a fixed part ("TrialList" or "BlockList") and two values from another sheet (subject and session number):
[Code] ........
Now, saving the text files with the desired file names works perfectly. However, Excel decides to change the names of the sheets that have been saved as text files accordingly. This is something I want to prevent from happening, since a second loop of actions will end because of the unexpected sheet names...
View 1 Replies
View Related
Dec 10, 2012
I want to save a single sheet from my Excel file to PDF. But this Macro saves all the sheets in separate pdf files. How do I adjust it to only save the breakdown sheet of my Quoting workbook?
Sub Save2PDF()
'
' Save2PDF Macro
Range("L66").Select
ActiveWorkbook.SaveAs FileName:= _
"Macintosh HD:Users:myratriegaardt:Desktop:Q1Breakdown.pdf", FileFormat:=xlPDF _
, PublishOption:=xlSheet
ActiveWindow.SmallScroll Down:=-160
End Sub
View 4 Replies
View Related
Apr 14, 2009
I am looking to save a range of data from an input sheet, to a data sheet.
I know how to save indivdual cells to a worksheet in the form of a data
what i am looking to do is save A6 - J6 down A19 - J19, but only saving the data which is entered
A6 - J6
A7 - J7
View 6 Replies
View Related
Dec 21, 2011
My set up office 2007 win xp pro ie8
is it possible using vba ideally with a button marked save, to save a single worksheet and name it, in CSV format
Then I would like to be able to do the reverse load a CSV file back in to a work sheet
Expanding upon this
1. Click a command button with caption “save”
2. Take the name of a given sheet, in my case DataToUpLoad and append it with a number to give a sheet name of DataToUpLoad 1 the first time it is save and DataToUpLoad 2 the next time and so on
3. Click another command button with the caption “load” interact with usual dialog box.
My current work around is to copy a sheet open a new work book past the sheet in the save that work book as CSV
The reason this is required is to mate up with the php on the server side
View 3 Replies
View Related
Dec 31, 2013
I have this excel sheet I'm trying to create (to make my life better at work). It's to track credit card refunds. It'll be saved on sharepoint. So my department will fill in the data on the "Ops" side, and then the accounts department will fill in their side. It's very rudimentary, but anything is better than the old, tattered BOOK we are currently using.
So far, I have the user/date/time stamps autofill, when the user fills in "Entered by" or "Recieved by". I have those cells locked so no one can edit it. I have separte passwords for both sides (Ops and Accounts).
What I want now is to be able to:
1. Lock each line once it's been entered and saved. Say my department fills in one entry. We save it. After that, it CANNOT be edited. If there are any changes, I'll put in a remarks column so people can enter stuff.
2. If someone enters the first two columns (Guest name, booking number), then the "Entered by" HAS to be filled, or the workbook cannot be saved.
3. ONLY letters can be used for Guest Name and Entered by. I've tried different things for this. While I've managed to make it work if the user enters a digit first, I can still enter John56, and it'll pass. I need it to only allow letters (and spaces).
4. The "Booking Number" should only allow six digits. No less no more than six digits. It can be 000001 even. But it has to have six. And, obviously, no letters, no spaces.
In the "ThisWorkbook" module, I've got this code:
Code:
Private Sub Workbook_Open()
Dim wSheet As Worksheet
For Each wSheet In Worksheets
wSheet.Protect Password:="hurlEy!", _
UserInterFaceOnly:=True
Next wSheet
End Sub
In the sheet1 module, I've got this code:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
On Error GoTo enditall
Application.EnableEvents = False
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(, 1).Value = Environ("username")
[code]....
View 1 Replies
View Related
Jan 30, 2003
I have a spreadsheet that imports data, manipulates it then deletes 2 of the sheets then saves the file under a different name to the network. Is there any way to save this new worksheet without it storing the macros - so when the user open it, only the data is there and they get no prompt to enable macros?
View 6 Replies
View Related
Jan 7, 2009
I have created a form in a worksheet which I have added questions too and then locked all cells except the ones where I want the answers in.
I have then added a button to the bottom of the sheet called "Print and Save". This work sheet is called "form"
On a second sheet called "database", I have all the titles of the questions running from a -> k and nother else.
What I want to happen is the user input the information on "form" into the boxes available. Once they have completed the questions, I want them to be able to click on "Print and Save" so that firstly the page "form" prints, and then for all of the answers to be saved in "database" below the titles for each question.
I have had a play, but just don't know where to start. Also, once there is a row of questions below the titles, I don't want it to overwrite information already there, it needs to go onto the next empty row available.
Attached is my excel file.
You will see in the code that I have the code for printing.. I just found this on the net and it seems to work fine for me.
View 9 Replies
View Related
Jul 6, 2007
How do I write a VB Script to take the user back to where they came from.
Example:
User is on Sheet 1 and clicks a macro that takes him to Sheet 10.
I need a macro that is on Sheet 10 that takes the user back to Sheet 1.
BUT if the User is on Sheet 5 and clicks on a macro that take him to Sheet 10
I need that same macro on Sheet 10 to take him back to Sheet 5.
View 14 Replies
View Related
