Is it possible to display all of the bars from a floating bar chart on the same line. The effect would be a single horizontal bar that turns "On" and "Off" from left to right. I'm not sure of the application, but it might represent when a room is occupied over time. I think one can create this effect using Andy Pope's "Column Chart with Varying Width Bars" charting technique (provided on his web site http://www.andypope.info/charts.htm ), but is there a more direct approach?
I have created a form that has two textboxes on. It is used to edit existing data that is selected by a combobox on the same form.
Is there a way to force the textboxes to show scroll bars if the text exceeds the textbox height or just have them always shown?
It is difficult to distinguish on some of the data whether the data goes beyond what is visible. Without actually clicking into that textbox the scroll bars will not show.
I am trying to compare the frequency of occurrence of multiple unique values within a data set and graph the results as a pareto. I have the formulas working to identify and count the occurrences, and the chart is designed and displaying the data, however I cannot get the graph to display in descending order.
I am unable to sort the data because it is generated from a series of formulas, the returned values of which cannot be sorted. (its hard to describe, see the attached workbook)
I would like to know how I can display the graph so that it shows the bars (primary axis) in descending order (highest value to left, lowest to right) since I cannot sort the data. i.e. For the attached workbook, I want the bars to display in descending number of occurrences: 81,15,5,5,3,3,2,2.
I am trying to derive the EMI for a Loan Amount and also chart a PIE graph for the same..
Instead of Manually feeding the values such as :
Variable 1 : Loan Amount : Min : Rs 50,000/- Max :Rs 5000000/- Each Spin (1 Unit) -Rs 25000/-
Variable 2 : Interest Rate : Min : 5% Max : 30% Each Spin (1 Unit) -0.25%
Variable 3 : Tenure/Duration : Min : 6 months Max : 30 years Each Spin (1 Unit) - 6 months
I want to have a Scroll-Bar where the values can change Automatically but am not aware of using the same...
Can someone please help me with a small attachment with the above variables attached to it..The values drawn should be displayed as well above the Scroll-Bar and maybe can make the Min and Max more dynamic by storing it somewhere in the Sheet..
I am looking for Non-VBA solution to do the same..
I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example: Imagine you own 3 different stores and you're selling oranges. So your table looks like this: http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis, Oranges sold on the y axis, and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
In the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?
I have a dynamic Named Ranges called ChartData containing 4 values from 4 cells on the row selected. I have a chart using this Named Ranges so that the value displayed are always referring to the current row. This works fine. I created a second Named Ranges ChartAvg which is =AVERAGE(ChartData) that I project to use in the Chart. However, I need to have 4 time the same value (average) if I want to display a line in the chart.
My problem is: I don't want (and can't) enter the Named Ranges ChartAvg in 4 cells to use in the chart. I wish to create a 3rd Named Ranges called ChartAvgData that would be used in the Chart. So now, to my question : How to create a Named Ranges that is a list of (4) values, somethine like: {ChartAvg,ChartAvg,ChartAvg,ChartAvg} This is not working, whereas {1,2,3,4} (for example) works fine.
I have a column of data that I'd like to visualize in a line chart. The cells in the column contain formulas that calculate numbers added to other sheets every month. The adjacent column has the names of each month. New data appears when the data for the month is added.
I'd like to ask the chart to not display the values that are currently zero, because we haven't arrived at that month yet. So, for instance, the cell in the column for November 2011 has a zero, because the range it sums has no data in it yet.
Is there a way to do this without having to go back to each chart every month and change the range to add-in the new data?
I insert a picture in the merged cell(2 lines) of QTablewidget,but the pictures can only display height of one line and becomes very narrow.How to solve it? I write the code in QT with C#.
I have a spreadsheet where I track income (positive) and expense (negative) items and compare budget to actual amounts. I want to create a simple bar graph comparing budgeted amounts to actual amounts for each item.
However, when I do this, I see all of my income items above the line (pointing up) and all of the expense items below the line (pointing downward).
Is there an option I can select to just use absolute values for the items so they all appear above the line?
Is it possible to display both the current code line number and the total line count of a macro while it's running?
I was thinking it would be handy for a progress indicator if the ProgressBar max value could be set to the LineCount total of the procedure and each line of code would increment the progressbar as the macro ran.
I have a exel file which has been exported from Access to exel. There are many cells which shows the data as in Cell A1 with the Linefeed character in between data in a cell. Is there any way (may be using a macro) where I can remove the character and get it to display as B1 in the same cell(A1). The file is attached herewith.
I have a textbox that constantly shows the contents of cell B1, a changing cell, as it is a total formula (to make my textbox display the contents of cell B1 I clicked on the textbox and then entered =B1 in the formula bar).
Trouble is, my textbox scrolls with the rest of my sheet and soon disappears from the screen. I need it to float on the screen and remain always visible when the sheet scrolls far up or down. How can I achieve that?
Or is there any other floating object that will constantly display the changing contents of cell B1? I’ve tried a textbox within a UserForm (which does float and remains always visible) but I cannot make that textbox display the contents of B1.
I wish to have a floating link in large spreadsheets that will always be visible and when clicked will return to a particular cell in that same spreadsheet.
Is there any code available for a floating Message Box instead of Standard Message where by the user can scroll the sheet and decide to choose "Yes" or "No".
if it is possible to create a floating Tab like you get on websites, so ehwn you move the spreadsheet to the left or right, the tab/shape with words in moves with you.
I was asked by a co worker if there is a way to make a data table float b/w tabs or in other words, it would always be visible no matter what tab or location you are in a workbook.
My first answer was no, that he would need to create that table on each tab and freeze the panes so that it was visible no matter where he was in his workbook.
cell A1 contains the numeric value: 3961.3 cell A2 contains the follwing: ="z equals "&B3-3933.7
which i would expect to give me: "z equals 27.6"
BUT, it gives me: "z equals 27.600000004"
which is awefully strange becos the 4 comes form nowhere...
what makes some sort of sense is that if the value in A1 is changed to 3961.4 or 3961.5, then the final decimal 4 in A2 changes into a 3, and then a 2.
when the value in A1 is changed to xxxx.7 the number in cell A2 becomes what one would expect it to be.
how do i get rid of these strange decimals???
(formatting cells, setting number of significant figures does not work. i naturally already tried that)
I am trying to get the first column to float down as you scroll down the spreadsheet to fill in information. How do I get that going. I can't figure it out.
I use excel 08, computers viewing the files are 03.
I have created a chart in a chart sheet (using VBA) - all well and good. Now I notice that if I place the mouse pointer over any of the pie slices, I see text similar to the following
Series 1 point "Swedbank" Value: nnnnnn (n%)
Now obviously (?), the name Swedbank is from the source data and the nnnnn (n%) are the values to be plotted. I'm wondering 2 things Can I "format" that text in any way, for example, so it shows Swedbank, value: nnnnn (n%)If I can, can I also format the numbers so that'll end up something like 1 234 567
is it possible to display the files open (the contents of the Windows drop down menu from standard toolbar) in a display that can be viewed at all times on a workstation. My reason for this is to monitor the files I have open to avoid trying to open a second copy and getting error reports from macros within. These error reports seem to frighten some of the users here and rather than read them and act accordingly they go for coffee and say thier system is down. It is my intention once I can get a system working, to introduce these people to monitor what they already have open, and more importantly what they do not need open at any particular time.
