Is it possible to display both the current code line number and the total line count of a macro while it's running?
I was thinking it would be handy for a progress indicator if the ProgressBar max value could be set to the LineCount total of the procedure and each line of code would increment the progressbar as the macro ran.
The code as it stands allows me to push a button and it immediately picks up on a meeting category and date of meeting, then sends emails to those that are supposed to attend based on a date that is within 7 days from the current date of pressing that button. HOWEVER; it seems to still send the email when the date has passed...is there a line I can put in this code to make it so that every date that has already passed will be discounted from future emails?
The code is as follows:
[Code].....
I have a macro that imports a report. In the header I'd like to display which day I imported the report, so I know I'm not looking at old data. I know I can use =TODAY() manually but I'd like to include it automatically in my macro.
View 7 Replies View RelatedI have a problem here.
I am trying to create an inputbox such that the text will display line by line instead of one line display
EG:
Selection = InputBox("Enter Your Selection No. 1 for aaa. 2 for bbb")
Above code will display text as:
"Enter Your Selection No. 1 for aaa. 2 for bbb"
But i would want the text to be displayed in:
"Enter Your Selection No."
"1 for aaa"
"2 for bbb"
I have a workbook with numerous macros in it and they are assigned to buttons in the different worksheets. I am trying to record a new macro and when I start recording and click on one of the other macros nothing happens. This wasn't a problem in excel 2003.
View 2 Replies View Relatedi hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
Is there any way I can display line numbers against the code in the Visual Basic Editor?
Or can I see in the current line number in the status bar?
or GoTo Line number?
The following block of code is evaluating the term in the array, if it exists and the value in col. M is a non integer, (which what I am testing for are fractions) then format the cell to a fraction number format.
That is ok, except it is changing the numberformat on text terms. I want it only to change the numberformat on numeric values.
I added the function Isnumeric to this line:
Isnumeric(cells(i, "M").value) Int(cells(i, "M").value)
which I thought would only evaluate numeric cells only, but this was unsuccessful.
Original Code: Unedited.
For i = 4 To LRowf
For Each Item In Array("HAT", "FTWR", "BOOT", "BOOTG", "BOOTY", "HWRISR", "HWBLTS")
On Error Resume Next
If (Cells(i, "F").Value = Item Or Cells(i, "G").Value = Item) And _
Cells(i, "M").Value Int(Cells(i, "M").Value) Then
Cells(i, "M").NumberFormat = "# ?/?"
On Error GoTo 0
Exit For
'End If
End If
Next Item
Next i
I have a macro, that basically runs a sub routine to count down say for example 1 min, at which time the workbook closes. However if the user opens one of the forms I would like to turn off the background timer macro. How can I do this with code? Is there code that does the opposite of 'application.run'?
View 1 Replies View RelatedI am writing a grading program, which during the course of functioning must run other code that has errors. I have used On Error Resume Next code to allow the program to keep functioning when it has run into errors so far. However, when a subroutine is called that calls another subroutine with incorrect parameters, I get a VBA error message pop up. Inserting On Error Resume Next directly into the other code doesn't stop this problem. I either need a way to have it skip over any call to a subroutine with improper parameters, or to check if a project can compile before grading it.
View 3 Replies View RelatedI have just written a macro to validate/clean up some data which I get on a monthly basis. Some of the columns come from a pdf file and thus excel recognises these as strings. I have written some code that would convert this string to an integer which runs fine when I step through the code. However when I run the macro from a button the number value goes from e.g. 5000 to 0.
The code is below:
VB:
Sub Condition2()
For k = 8 To LastRow
Worksheets("Bordx Format").Cells(k, i - 1).Value = CDec(Cells(k, i - 1).Value)
Next k
End Sub
Now..when I run any of my macros, I get the following message.. "Code Execution has been interrupted".
I'm not sure why I'm getting this message but it happens everytime I run ANY macro. Note that if I hit "Continue" every time it gives me the option, I am able to successfully run the macro, but obviously, I shouldn't have to do this.
I am attempting to run a MS Ecel macro that is stored on a MS Excel shared file in a MS Ecel target file (locally stored on my C drive) from a VBA module in Ms Access. That is, from a code i want to open the .xls file that houses the macro, and then open the .xls file that i want to run the file in, and then run the macro.
Here is my situation: the file that houses the macro has the workbook hidden and causes in error.
if i unhide the workbook i get a Run-Time Error 91...object variable or With block variable not set.
if i hide the workbook the vba coding can't find the macro...run time error 1004
once again, i currently have an excel file that houses macro whose workbook is hidden.
does anyone know how this can be accomplished?
here is the ....
If I number my lines of code and an error occurs, the use of Erl in the VBA will then return the exact VBA line number that the error occurred on. Is it possible to automatically capture or record that same effect when the macro process leaves its current sub and goes to another?
Reason: I'm trying to create a Call Stack that can be reported through an Error Handler that will include the exact location and process that the error occurred to better troubleshoot and understand where and why the error occurred.
The best I can come up with so far is manually putting in bookmarks along way so I know how far along the macro went before the error. From all of my searching I believe retrieving the Excel Call Stack is not possible and so one must be manually created.
Enclosed is an example of what I have so far. It goes through several macros and logs the Call Stack. It’s a work in progress so it is a little sloppy looking but it is functional. If a Sub finishes it is then taken out of the Call stack.
Several "BookMarks" are placed to give an idea of how far along the Macro has gone within that Sub. The Code for the Erl example is:
Sub SampleErrorWithLineNumbers()
Dim dblNum As Double
10 On Error Goto PROC_ERR
' Errors if table doesn't exist
20 Select Case Rnd()
Case Is < 0.2
30 dblNum = 5 / 0
40 Case Is < 0.4
50 dblNum = 5 / 0
60 Case Is < 0.6
70 dblNum = 5 / 0
80 Case Is < 0.8
90 dblNum = 5 / 0
100 Case Else
End Select
110 Exit Sub
PROC_ERR:
120 MsgBox "Error Line: " & Erl & vbCrLf & vbCrLf & _
"Error: (" & Err.Number & ") " & Err.Description, vbCritical
End Sub
I want to be able to run a certain chunk of code in the macro if a certain condition is true, or if that condition is not true then I want to bypass that chunk of code. It doesn't matter if this is accomplished with an if... then... else statement, or some other way.
View 6 Replies View RelatedI have a macro code that will create line graph referring the data given in defined column A1-C4,
Code with Static column range:-
ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=Range("'Sheet2'!$A$1:$C$4")
ActiveChart.ChartType = xlLineStacked
I tried to modify the above code, so it will refer undefined/dynamic data column, but getting an error during execution "Run Time Error - 424:" "Object required"
Code with Dynamic column range:-
ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=ActiveSheet.Range("a1", _
ActiveSheet.Range("a1").End(xlDown).End(xlToRight)).Select
ActiveChart.ChartType = xlLineStacked
I have built a small userform with 3 fields. The macro ran OK first few times. Now, when user enters data in the form and clicks OK nothing happens. I found that repeated clicking on OK or Cancel button on form had no effect. I then observed that VBA editor was open and the yellow cursor was displayed on the first code line under cmdOK_click procedure. The code line was also highlighted in yellow. There are no errors to debug and no break points etc. When I clicked the Run (or Continue) icon from the VBA toolbar, the macro completed OK. Question: Why is the macro pausing on the first line and how can I make it run without pausing for no apparent reason.
View 4 Replies View RelatedI've got a worksheet_selectionchange macro on a sheet, and another macro that you can run after it. The issue is that when the second macro runs, it also runs the selectionchange macro, and wipes some of the info that the second macro should be copying.
Is there a piece of code that I can use in the second macro to block the selectionchance code from running until it's compelte?
I have to append the cell value with a user input string in to the same cell.
i.e, if the user types "Issue" in the cells ranging C1:C200, I would like to make a mandatory issue description to be entered by the user. So a user form with text box and command button was introduced which should append the cell value with the user input in the text box.
The issue that I have is with the cell selection within the code for the form.
ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")"
For example if the user tabs out from cell C3, the output from the userform will be written to D3 ? or if the user hits Enter key to come out, the output will be written to C4 and so on.
How can I make ure the output is going to the same cell?
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Application.Intersect(Target, Range("$C$1:$C$200")) = "Issue" Then
Dim MyForm As New UserForm1
MyForm.Show
Else
Exit Sub
End If
End Sub
'Code for the userform is below:
Private Sub CommandButton1_Click()
If TextBox1.Text = "" Then
' the user input is mandatory
MsgBox "Issue Details is mandatory", vbCritical, "Mandatory Field"
TextBox1.SetFocus
Else
' append the cell value with user input in the text box
'****issue is here in the next line
ActiveCell.FormulaR1C1 = "Issue (" + TextBox1.Text + ")"
Hide
End If
End Sub
Although not a complete novice, I am fairly new to EXCEL/VBA.
Is there a script that can be embedded into an EXCEL workbook that checks the Macro security of the PC, and if set to HIGH, shows a message that states that "Macro security is too high to open this workbook".
With security set to high, Excel will open my w/ book, but not run any of my checks that are set in the module. So a "catch 22" really, I need the macros to run to that it is being opened on an authorised computer etc, but if security is set to HIGH, then they don't run, similarly, if I put a macro in to check the macro setting, it won't run unless the security is set to medium.
I have a program that screen scrapes data fom a mainframe emulation program. There are many loops used in order to slow the program down checking for things to load before taking the information. I would like to build some kind of display showing the user what the program is doing and allow them to stop the program if they like. Right now while the program is running everything is frozen and unresponsive.
View 3 Replies View RelatedI want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
I have a running list of to-do items sorted by date due (the dates are in the "C" column and start at row 9 to make room for some title info.)
VBA code that would highlight the rows of items that fall in the current week or next 7 days, whichever is easier.
I have a worksheet with 15 procedures running after each other and repeated about 50 times. How can I display to the user which procedure is running at the moment. I'm using a form with a label on at the moment, but it doesn't update after the first display.
View 1 Replies View RelatedI have the =NOW() entered in to a cell on my excel dashboard. Is there a code or other method that I could use to refresh the time every second so that the current time is always visible.
View 3 Replies View RelatedI am dealing with several very large spreadsheets using VBA to do various things. I found that my code worked well, but was taking a long time to run. The biggest time consumer was my use of the AutoFilter features. I have since turned calculations to manual before my code runs and set it back to auto when my code is done running. What are the potential consequences of my turning calculations to manual and then back to auto?
View 2 Replies View RelatedI have a worksheet that displays all the current months weekdays from a starting date in cell b2 using the weekday formula it works accross a row checking next day is a weekday and adding 1 but since some months have more weekdays than others the few cells that are sometimes not needed are then filled with a weekday from the next month how can I stop this? and only have the current months weekdays
View 3 Replies View RelatedI'm trying to create a completion statement on where I will add up the money my client has sent to me and also add up the money I need to pay out in order for them to complete their transaction. The end result I want is I would like to display whether my client has given me to much money and I need to repay them. Or if they haven't given me enough then I need to invoice them. I need excel to display for me after all the figures have been added and subtracted if the end figure is negative then display in D19 (balanced owed to you). If the end figure is positive (Balance required from you) display in D20.
View 12 Replies View RelatedI currently have a spreadsheet with 500ish renewal dates. I need to be able to take the renewal dates (dd-mmm) in column B and then display the current year with renewal date, if the date has not yet come, or the next year with renewal date, if the date has already passed in column C (dd-mmm-yy).
View 3 Replies View RelatedI have a tab set up to display information that has been colletect on other tabs. What I would like to do is change this information depending on what month is selected.
For example, if I select December then data would be pulled from other tabs and displayed. If I Select June the information would change and select other data from the same tabs.