Double Click Event With Multiple If Statements
Mar 23, 2014I am trying double click event.
Code is as follows:
[Code] .....
Not getting there yet.
ADVERTISEMENT
Before Double Click Event Procedure For Multiple Sheets
Apr 2, 2008I have a calendar userform set as Userform1 and I would like it to pop up upon double clicking in two different ranges 'date' which is on sheet 1 and 'dates' which is on sheet 4.
So far I have this code in Thisworkbook, which works perfectly for Sheet 1, but I get the following error on Sheet 4: Run time error '1004': Methed 'intersect of object'_global' failed.
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
If Intersect(Target, Sheet1.Range("date")) Is Nothing Then Exit Sub
UserForm1.Show
Exit Sub
If Intersect(taregt, Sheet4.Range("date2")) Is Nothing Then Exit Sub
UserForm1.Show .............................
Double Click Event
Jun 11, 2009I am trying to write some questions on cells of Sheet1 of a workbook. Then I want to write the answers on cells of Sheet2 of the same workbook. I want the user to be able to double click the question-cell on Sheet1 and be taken to the respective answer on Sheet2.
View 6 Replies View RelatedDouble Click Event Runs Twice?
Aug 18, 2014I have set double click event to open my userform.
It opens normally, but when I try to close It, It opens again. After that I can close It normally.
I checked Userform code, but can't figure out why event triggers twice. What's wrong ??
This is my double click code :
[Code] ......
Looping Within Double Click Event
Jun 13, 2007I would like to create a macro in which, when the user double clicks on a cell, that cell will be shaded yellow and other cells within the Workbook containing the same value as that cell will be crossed out. I have come up with the below code, but it doesn't work correctly. Any ideas on what I have done wrong? Would also like it to not cross out the cell the user double clicked on.
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim wk As Worksheet
Dim selectedName As String
selectedName = ActiveCell.Value
With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
For Each wk In ActiveWorkbook.Worksheets
For i = 200 To 2 Step -1
If ActiveSheet.Cells(i, 2).Value = selectedName Then
ActiveSheet.Cells(i, 2).Font.Strikethrough = True
End If
Next
Next
End Sub
[/code]
Run SAME Code For Different Ranges Using Before Double Click Event
Apr 4, 2013code to have check marks appear in multiple non-adjacent columns in a worksheet by double clicking.
The code I am using works for a single column : (The named range "Checkboxes1" is D4:D100)
VB:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Target.Count > 1 Then Exit Sub
If Intersect(Target, Range("Checkboxes1")) Is Nothing Then Exit Sub
[Code]......
However I also need the code to work on two other named ranges "Checkboxes2" (E4:E100) and "Checkboxes3" is G4:G100.
Apply Double Click Event To All Sheets
Jul 16, 2014I am trying to apply a double click event to all sheets. It works if I apply to each sheet but I won't to prevent from having to copy and paste into each new sheet. I am trying this code in ThisWorkbook but doesn't seem to work.
VB:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
' If the cell is clear
If Sh.Target.Interior.ColorIndex = xlNone Or Sh.Target.Interior.Color <> vbCyan Then
' Then change the background color to yellow
Sh.Target.Interior.Color = vbCyan
[Code]....
Double Click Event In Shared Workbook?
Jul 29, 2014I have a Shared Workbook that 10 or 15 users are in and out of all day. In Column A on a few sheets I have a Before Double Click Event that launches a userform. The macro works for all users except this one person. I have tried several things:
1. I closed the file and Reopened it, to make sure that the user did not disable macros.
2. I checked the file on other users computers to see if the file was working properly (It was.)
3. I went to Options>Trust Center>Trust Center Settings>Macro Settings and Enabled All Macros on this User's system
None of these actions corrected the issue.
The purpose of the BeforeDoubleClick Event is to store Columns A:E data and then let the user add more information through the form. Once the User fills out the UserForm. A:E is transferred to one of a number of sheets depending on criteria in the UserForm. A:E is transferred along with the new information that the user has entered in the UserForm.
Another symptom is that on other computers when the Before Double Click Event is activated the Userform launches and the cursor does not appear in the cell until after the User Clicks a Command Button to Update Data on the Userform. On this individual's computer the cursor does appear in the cell without the Userform launching....
Before Double Click Event Of Worksheet Created By Program
Oct 19, 2007My program(which is an add-in, or will be when I've finished writing it) creates a new worksheet called "Groups Summary" I would like this sheet to be locked so that the user can not modify anything on it. I would also like that if they double click a cell this will launch a userform if based on certain conditions.
I believe this code would have to go in the worksheet itself, so the question is how do I get the macro to enter code into a worksheet that it creates?
Is there a way to write it in a standard module and then automatically copy it when the worksheet is created?
Excel 2003 :: Double Click Event On Form Title Bar?
Dec 10, 2012I am using excel 2003. I would like to double click on the form title bar to shrink the form to only show title bar. Double click again will restore the original size.
View 8 Replies View RelatedSUM Function And Double Click
Sep 30, 2009I have a spreadsheet that just uses the basic "SUM" function. This morning I went to use it and the function does not work after I change a number within the field of that function. If, however, I go into the SUM function and double click, then hit enter, it does the new calculation.
View 3 Replies View RelatedDouble Click To Add Time
Jun 1, 2014I'm trying to simplify some data entry on an excel sheet, by making a double click vba to add a time any where in 2 columns, specifically H and I .
[Code] ....
I tried to modify this code but my understanding of VB is very lacking.
Go To Range Name By Double Click
Jul 28, 2014I have this list of all rangenames in my workbookin column A:A
For some reason I want to doubleclick on the rangename in the list to activate this range.
The reason is that I want more smooth activation-prosess; The Excel Range List is too long to practical use as a direct lookup, so I want to activate directly from my own list (where i have added definitions to the range names.
I have tried to build a hyperlink formula, but failed. Maybe the macro below can be modified to do the job, but I am stuck here as well.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim RangeName
Application.ScreenUpdating = False
If Target.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A:A")) Is Nothing Then
Cancel = True
[Code] ...........
Open With Double-click
May 12, 2009I seem to have broken something!. Whenever I double-click to open an Excel file (.xls files are associated correctly), Excel opens, but nothing happens. That status bar says "Ready," but my workbook never appears.
If I do a File-> Open within Excel, then I am able to open the workbook. I have no idea what is going on. This occurs for all Excel files whether they contain macros or not.
Double Click Range
Aug 31, 2009I have a code for doubleclick on a cell and a gdt application chart will open.
Private Sub Worksheet_BeforeDoubleClicK(ByVal Target As Range, Cancel As Boolean)
ActiveSheet.Unprotect
ThisWorkbook.Unprotect
Dim i As Integer
Dim gdt As Long
Dim S As String
Cancel = True
With Application
If Target.Address(False, False) "C11" Then Exit Sub
'Place your direct path to open this GDT application
S = "C:Documents and SettingsUserMy DocumentsAndy's MachineINSPECTIONGDTGDT BitmapGD&T_Font.exe"
If Dir(S) = "" Then
MsgBox "File does not exist:" & vbCrLf & S, vbCritical, "Error"
Exit Sub
End If
gdt = Shell("""" & S & """", vbNormalFocus)
End With
ActiveSheet.Protect
ThisWorkbook.Protect
End Sub
What would the code be for a range of cells if doulbe clicked the range would be C11 thru C35
Also, I have a double click code for another symbol chart to open.
How, would this be used in the same manner if a coulmn or row were to apply on double click.
Highlight On Double Click
Jan 1, 2010here is what i am trying to accomplish:
on the worksheet there are six ranges...each range has three columns...the first is team name, the second is rep name, and the third is the metric being measured.
what i would like to happen is...
when a team name is double clicked in any one of the ranges, i would like all three cells (team name, rep name, and metric) to be boldfaced and have the cell interior change color for all instances across all six ranges that match the team name double clicked. when double clicked again, it should go back to original formatting.
likewise, when a rep name is double clicked in any one of the ranges, i would like all three cells (team name, rep name, and metric) to be boldfaced and have the cell interior change color for all instances across all six ranges that match the rep name double clicked. when double clicked again, it would go back to original format.
so for example, if i happen to click on a cell in the team column in the second range for "team a", all cells in each range (including the adjacent cells for rep and metric) would be highlighted.
Macro To Run On Double Click
Feb 9, 2010I have populated a listbox from a filtered list and when 'Double Clicking' a name I want a macro to run. All seems to be OK apart from it is not finding/returning any data; I know the data is there and I think it may be the way I'm referencing the listbox value;
Sub CopySignificant()
Dim DestSheet As Worksheet
Set DestSheet = Worksheets("Clients to Invoice")
Dim sRow As Long 'row index on source worksheet
Dim dRow As Long 'row index on destination worksheet
Dim sCount As Long
sCount = 0
dRow = 1...................
Reverse Before Double Click
Sep 29, 2006I am trying to create code so that when a cell in Column C (for example C1) is double clicked, it makes the font bold, italicized, blue and inserts a row below the double clicked cell. I am also trying to make it so that if the cell is double clicked again, it removes the bold, italics, blue and deletes the row that was previously inserted.
Private Sub Worksheet_BeforeDoubleClick _
(ByVal Target As Excel.Range, Cancel As Boolean)
If Target.Font.Bold Then
ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select
Selection.Insert Shift:=xlDown
ActiveCell.Select
Cancel = True
If Not Target.Font.Bold Then
ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select
Selection.Delete Shift:=xlUp
ActiveCell.Select
Cancel = True
End If
End If
End Sub
Run Macro On Double Click
Oct 26, 2006I want a X to be put in the activecell if empty or removed if already there. By searching this forum I found and read the article "Adding a Command Button to the Excel Right Click Pop-up Toolbar/Command Bar" and was able to add the code to do this to the right click sub menu. Is there a way to do the same thing by double clicking on the cell? This probably seems a bit nit pickey but I would just like for it to work using double click for my users. I wrote the following code to performe the action
Sub Toggle_Macro()
If IsEmpty(ActiveCell) = True Then
ActiveCell.Value = "X"
With Selection
.HorizontalAlignment = xlCenter
End With
With Selection.Font
.Name = "Arial"
.FontStyle = "Bold"
.Size = 12
.ColorIndex = 3
End With
Else: Selection.ClearContents
End If
End Sub
And placed the code below in Private Module of the Workbook Object.................
Double Click On Cell To Run Macro
May 22, 2014I am trying to run a macro when I double click on a certain cell (D34). The cell has data in it (Southeast NSC). What I am expecting to happen is once I double click on the cell the macro will run the retrieve and I will end up at expense chart page.
The macro I am trying to run is an Essbase retrieve.
[Code] ....
I tried using the macro below but no luck:
[Code] ....
And i tried:
[Code] ....
Double Click Is Unlocking Worksheet
Dec 3, 2008Testing my worksheet, I found that if I double click on any cell that is not locked, the worksheet becomes unprotected. I need to prevent this from happening. I tried the following code, but it didn't work.
View 6 Replies View RelatedDouble Click To Bring Up Form
Apr 6, 2009I'm using a little sub routine to bring up a pop up calendar when i click in a cell, everythings lovely but it annoyingly comes up when i select a clolumn or row that also contains that cell. modification to require a double click to display the calendar?
View 2 Replies View RelatedShortcut Key That Acts Like A Double Click
Jun 15, 2009In Excel is there a shortcut key the replaces using your mouse to double click to get into the cell?
View 2 Replies View RelatedDouble Click And Copy Data
Jun 16, 2009I have a sheet with some 300 plus rows of data. I use filters to sort through the rows to get down to anywhere from 8 to 10 or so rows. At that point I would like to be able to select (doule click) a filtered row of 10 cells (A:J) copy the data and paste it to a different sheet starting with cell B18. I want to be able to perform this process up to 5 seperate times.
I have recorded a macro to do basically what I am trying but with many short falls. It only selects one row, I cannot double click on a row and it dosen't always paste to the proper cell.
Disable Double Click Shortcut
Jul 10, 2009When we double click between two cell it goes to the last entered cell. I would like to disable this through a macro. Can anyone pls provide me a code to disable this.
View 3 Replies View RelatedDouble Click To Activate Message Box
Sep 9, 2009Double Click to Activate Message Box
modify my code to do the following:
How To Double Click On A Cell In Column
Dec 5, 2011I want to be able to double click on a cell in a column. If it has a certain word in it, it will take it to that worksheet. Auto filters are used so these cells can move in a column at any time. This is why I am looking for a code to validate the contents in the cell first.
ie. Cell has the word: BSALT, when double clicked it will take it to the BSALT worksheet.
Cell has the word MLW, when double clicked it will take it to the MLW worksheet.
And so on.
These values are in one column only. If they weren't able to be autofiltered i could do it, but the mere fact that they can move around is giving me trouble.
VBA Double Click To Copy Cells
Nov 27, 2013I am looking to double click a cell in Column "A" to copy the ajacent cells to another sheet.
In worksheet "Summary". When I double click Cell A5, I want to copy Cells B5:D5 to Sheet "Timesheet", insert Row "5" and paste in Cells B5:D5.
Popup Menu On Double Click
Jul 11, 2014Is it possible to create a menu that could be called by a double click which would allow you to click on a value from that menu and insert it into the double clicked cell. I know I could use a data validation list, but that is tacky and you have to scroll down the list to find the data you would like. I'd like to have a menu pop up that stores different values in 6 columns and 25 rows. Any way without having to jump into an access database?
View 2 Replies View RelatedDouble Click To Enter User ID
Aug 20, 2007i have some code that allows my users to enter their user ID on double clicking. The worksheet code below shows how on double clicking into Colum 3 (If Target.Column = 3 Then) then the user ID will appear. Q: How do i get the code to work in Columns 3, 5 and 7 but not those inbetween?! I tried using "or" but it allowed the ID to be entered into all columns! i.e. 3,4,5,6 and 7 which is not what I require. In short I need the ID to appear on double clik into every other column.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim user As String
'This refers to the function ReturnUserName, which takes the name from the NT environment
If Target.Column = 3 Then
Target = ReturnUserName
Cancel = True
End If
End Sub