Run SAME Code For Different Ranges Using Before Double Click Event

Apr 4, 2013

code to have check marks appear in multiple non-adjacent columns in a worksheet by double clicking.

The code I am using works for a single column : (The named range "Checkboxes1" is D4:D100)

VB:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Target.Count > 1 Then Exit Sub
If Intersect(Target, Range("Checkboxes1")) Is Nothing Then Exit Sub

[Code]......

However I also need the code to work on two other named ranges "Checkboxes2" (E4:E100) and "Checkboxes3" is G4:G100.

View 5 Replies


ADVERTISEMENT

Double Click Event

Jun 11, 2009

I am trying to write some questions on cells of Sheet1 of a workbook. Then I want to write the answers on cells of Sheet2 of the same workbook. I want the user to be able to double click the question-cell on Sheet1 and be taken to the respective answer on Sheet2.

View 6 Replies View Related

Double Click Event Runs Twice?

Aug 18, 2014

I have set double click event to open my userform.

It opens normally, but when I try to close It, It opens again. After that I can close It normally.

I checked Userform code, but can't figure out why event triggers twice. What's wrong ??

This is my double click code :

[Code] ......

View 1 Replies View Related

Looping Within Double Click Event

Jun 13, 2007

I would like to create a macro in which, when the user double clicks on a cell, that cell will be shaded yellow and other cells within the Workbook containing the same value as that cell will be crossed out. I have come up with the below code, but it doesn't work correctly. Any ideas on what I have done wrong? Would also like it to not cross out the cell the user double clicked on.

Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)

Dim wk As Worksheet
Dim selectedName As String
selectedName = ActiveCell.Value

With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With

For Each wk In ActiveWorkbook.Worksheets

For i = 200 To 2 Step -1
If ActiveSheet.Cells(i, 2).Value = selectedName Then
ActiveSheet.Cells(i, 2).Font.Strikethrough = True
End If
Next
Next
End Sub
[/code]

View 9 Replies View Related

Apply Double Click Event To All Sheets

Jul 16, 2014

I am trying to apply a double click event to all sheets. It works if I apply to each sheet but I won't to prevent from having to copy and paste into each new sheet. I am trying this code in ThisWorkbook but doesn't seem to work.

VB:

Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
' If the cell is clear
If Sh.Target.Interior.ColorIndex = xlNone Or Sh.Target.Interior.Color <> vbCyan Then
' Then change the background color to yellow
Sh.Target.Interior.Color = vbCyan

[Code]....

View 3 Replies View Related

Double Click Event With Multiple If Statements

Mar 23, 2014

I am trying double click event.

Code is as follows:

[Code] .....

Not getting there yet.

View 14 Replies View Related

Double Click Event In Shared Workbook?

Jul 29, 2014

I have a Shared Workbook that 10 or 15 users are in and out of all day. In Column A on a few sheets I have a Before Double Click Event that launches a userform. The macro works for all users except this one person. I have tried several things:

1. I closed the file and Reopened it, to make sure that the user did not disable macros.

2. I checked the file on other users computers to see if the file was working properly (It was.)

3. I went to Options>Trust Center>Trust Center Settings>Macro Settings and Enabled All Macros on this User's system

None of these actions corrected the issue.

The purpose of the BeforeDoubleClick Event is to store Columns A:E data and then let the user add more information through the form. Once the User fills out the UserForm. A:E is transferred to one of a number of sheets depending on criteria in the UserForm. A:E is transferred along with the new information that the user has entered in the UserForm.

Another symptom is that on other computers when the Before Double Click Event is activated the Userform launches and the cursor does not appear in the cell until after the User Clicks a Command Button to Update Data on the Userform. On this individual's computer the cursor does appear in the cell without the Userform launching....

View 9 Replies View Related

Before Double Click Event Of Worksheet Created By Program

Oct 19, 2007

My program(which is an add-in, or will be when I've finished writing it) creates a new worksheet called "Groups Summary" I would like this sheet to be locked so that the user can not modify anything on it. I would also like that if they double click a cell this will launch a userform if based on certain conditions.

I believe this code would have to go in the worksheet itself, so the question is how do I get the macro to enter code into a worksheet that it creates?

Is there a way to write it in a standard module and then automatically copy it when the worksheet is created?

View 10 Replies View Related

Before Double Click Event Procedure For Multiple Sheets

Apr 2, 2008

I have a calendar userform set as Userform1 and I would like it to pop up upon double clicking in two different ranges 'date' which is on sheet 1 and 'dates' which is on sheet 4.

So far I have this code in Thisworkbook, which works perfectly for Sheet 1, but I get the following error on Sheet 4: Run time error '1004': Methed 'intersect of object'_global' failed.

Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
If Intersect(Target, Sheet1.Range("date")) Is Nothing Then Exit Sub
UserForm1.Show
Exit Sub
If Intersect(taregt, Sheet4.Range("date2")) Is Nothing Then Exit Sub
UserForm1.Show .............................

View 9 Replies View Related

Excel 2003 :: Double Click Event On Form Title Bar?

Dec 10, 2012

I am using excel 2003. I would like to double click on the form title bar to shrink the form to only show title bar. Double click again will restore the original size.

View 8 Replies View Related

Code To Simulate A Double Click

Sep 19, 2007

I'm trying to find the code which will have the effect of a double click.

I want to use event code so that when I click on a cell once it will cause a drop-down in the cell (the cell is formatted with wrapped text).

View 9 Replies View Related

Double Click On Listbox Item To Run A Code?

Jun 4, 2014

I have a 2 column listbox storing Policy Number and Number of pages. Suppose it has 10 records. Now I want the code so that when I double click on a particular policy number of the listbox then I should be able to make the changes in that. (it might be changing the ppolicy number or number of pages if the user types something wrong by mistake)

View 1 Replies View Related

Code In BeforeSave Event Causing A Double Save

Jul 22, 2009

In the situation where I shut down my model (i.e. not just press Ctrl+S, but shut it down), the following code saves the model twice. I only want it to save once. I really can't see why it saves a second time.

NB: I know if you set Cancel to True in the BeforeSave event, it should prevent the model from saving after the event, but even when set to true in the below code, it still saves...

Private Sub Workbook_BeforeClose(Cancel As Boolean)
bIsClosing = True 'Given we shut model, this public bIsClosing is set to true...
End Sub

Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim wsArray() As Variant
Dim iCnt As Integer
Dim wsSht As Worksheet
Application. ScreenUpdating = 0
Splash.Visible = True 'Splash is codename for warning spreadsheet, this is left
'visible while all other sheets are to be hidden.......................

View 9 Replies View Related

Excel 2007 :: Run Code Only When Double Click In Any Cell Of Three Different Columns

Jul 13, 2014

How to run some VBA code only when double click any cell of three different columns (say A, G,H) and not run in any other cell. This is being run in Excel 2007.

View 7 Replies View Related

Textbox Click Stops Event Code Running

Aug 26, 2007

I have a textbox from the drawing toolbar. When someone changes a cell then clicks in the textbox, Worksheet_Change does not run. If they double click in the cell, that's OK I can capture that event and protect the sheet, stopping them clicking in it. But if they just start typing in the cell, I can't capture that. I have seen some API code which captures keypresses, but it is not practical to use as it loops repeatedly. I could lock the textbox and have the user do something to unlock it, but this is a last resort.

View 7 Replies View Related

Non-Continuous Range In Event Code: Show A UserForm When A Cell In 1 Of 31 Named Ranges Is Selected

Nov 7, 2006

I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim i As Long

For i = 1 To 31
If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then
If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................

View 3 Replies View Related

SUM Function And Double Click

Sep 30, 2009

I have a spreadsheet that just uses the basic "SUM" function. This morning I went to use it and the function does not work after I change a number within the field of that function. If, however, I go into the SUM function and double click, then hit enter, it does the new calculation.

View 3 Replies View Related

Double Click To Add Time

Jun 1, 2014

I'm trying to simplify some data entry on an excel sheet, by making a double click vba to add a time any where in 2 columns, specifically H and I .

[Code] ....

I tried to modify this code but my understanding of VB is very lacking.

View 10 Replies View Related

Go To Range Name By Double Click

Jul 28, 2014

I have this list of all rangenames in my workbookin column A:A

For some reason I want to doubleclick on the rangename in the list to activate this range.

The reason is that I want more smooth activation-prosess; The Excel Range List is too long to practical use as a direct lookup, so I want to activate directly from my own list (where i have added definitions to the range names.

I have tried to build a hyperlink formula, but failed. Maybe the macro below can be modified to do the job, but I am stuck here as well.

Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim RangeName
Application.ScreenUpdating = False
If Target.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A:A")) Is Nothing Then
Cancel = True

[Code] ...........

View 2 Replies View Related

Open With Double-click

May 12, 2009

I seem to have broken something!. Whenever I double-click to open an Excel file (.xls files are associated correctly), Excel opens, but nothing happens. That status bar says "Ready," but my workbook never appears.

If I do a File-> Open within Excel, then I am able to open the workbook. I have no idea what is going on. This occurs for all Excel files whether they contain macros or not.

View 9 Replies View Related

Double Click Range

Aug 31, 2009

I have a code for doubleclick on a cell and a gdt application chart will open.

Private Sub Worksheet_BeforeDoubleClicK(ByVal Target As Range, Cancel As Boolean)
ActiveSheet.Unprotect
ThisWorkbook.Unprotect
Dim i As Integer
Dim gdt As Long
Dim S As String
Cancel = True
With Application

If Target.Address(False, False) "C11" Then Exit Sub

'Place your direct path to open this GDT application

S = "C:Documents and SettingsUserMy DocumentsAndy's MachineINSPECTIONGDTGDT BitmapGD&T_Font.exe"

If Dir(S) = "" Then
MsgBox "File does not exist:" & vbCrLf & S, vbCritical, "Error"
Exit Sub
End If
gdt = Shell("""" & S & """", vbNormalFocus)

End With

ActiveSheet.Protect
ThisWorkbook.Protect
End Sub
What would the code be for a range of cells if doulbe clicked the range would be C11 thru C35

Also, I have a double click code for another symbol chart to open.

How, would this be used in the same manner if a coulmn or row were to apply on double click.

View 9 Replies View Related

Highlight On Double Click

Jan 1, 2010

here is what i am trying to accomplish:

on the worksheet there are six ranges...each range has three columns...the first is team name, the second is rep name, and the third is the metric being measured.

what i would like to happen is...

when a team name is double clicked in any one of the ranges, i would like all three cells (team name, rep name, and metric) to be boldfaced and have the cell interior change color for all instances across all six ranges that match the team name double clicked. when double clicked again, it should go back to original formatting.

likewise, when a rep name is double clicked in any one of the ranges, i would like all three cells (team name, rep name, and metric) to be boldfaced and have the cell interior change color for all instances across all six ranges that match the rep name double clicked. when double clicked again, it would go back to original format.

so for example, if i happen to click on a cell in the team column in the second range for "team a", all cells in each range (including the adjacent cells for rep and metric) would be highlighted.

View 9 Replies View Related

Macro To Run On Double Click

Feb 9, 2010

I have populated a listbox from a filtered list and when 'Double Clicking' a name I want a macro to run. All seems to be OK apart from it is not finding/returning any data; I know the data is there and I think it may be the way I'm referencing the listbox value;

Sub CopySignificant()

Dim DestSheet As Worksheet
Set DestSheet = Worksheets("Clients to Invoice")

Dim sRow As Long 'row index on source worksheet
Dim dRow As Long 'row index on destination worksheet
Dim sCount As Long
sCount = 0
dRow = 1...................

View 9 Replies View Related

Reverse Before Double Click

Sep 29, 2006

I am trying to create code so that when a cell in Column C (for example C1) is double clicked, it makes the font bold, italicized, blue and inserts a row below the double clicked cell. I am also trying to make it so that if the cell is double clicked again, it removes the bold, italics, blue and deletes the row that was previously inserted.

Private Sub Worksheet_BeforeDoubleClick _
(ByVal Target As Excel.Range, Cancel As Boolean)
If Target.Font.Bold Then
ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select
Selection.Insert Shift:=xlDown
ActiveCell.Select
Cancel = True
If Not Target.Font.Bold Then
ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select
Selection.Delete Shift:=xlUp
ActiveCell.Select
Cancel = True
End If
End If
End Sub

View 3 Replies View Related

Run Macro On Double Click

Oct 26, 2006

I want a X to be put in the activecell if empty or removed if already there. By searching this forum I found and read the article "Adding a Command Button to the Excel Right Click Pop-up Toolbar/Command Bar" and was able to add the code to do this to the right click sub menu. Is there a way to do the same thing by double clicking on the cell? This probably seems a bit nit pickey but I would just like for it to work using double click for my users. I wrote the following code to performe the action

Sub Toggle_Macro()
If IsEmpty(ActiveCell) = True Then
ActiveCell.Value = "X"
With Selection
.HorizontalAlignment = xlCenter
End With
With Selection.Font
.Name = "Arial"
.FontStyle = "Bold"
.Size = 12
.ColorIndex = 3
End With
Else: Selection.ClearContents
End If
End Sub

And placed the code below in Private Module of the Workbook Object.................

View 2 Replies View Related

Double Click On Cell To Run Macro

May 22, 2014

I am trying to run a macro when I double click on a certain cell (D34). The cell has data in it (Southeast NSC). What I am expecting to happen is once I double click on the cell the macro will run the retrieve and I will end up at expense chart page.

The macro I am trying to run is an Essbase retrieve.

[Code] ....

I tried using the macro below but no luck:

[Code] ....

And i tried:

[Code] ....

View 1 Replies View Related

Double Click Is Unlocking Worksheet

Dec 3, 2008

Testing my worksheet, I found that if I double click on any cell that is not locked, the worksheet becomes unprotected. I need to prevent this from happening. I tried the following code, but it didn't work.

View 6 Replies View Related

Double Click To Bring Up Form

Apr 6, 2009

I'm using a little sub routine to bring up a pop up calendar when i click in a cell, everythings lovely but it annoyingly comes up when i select a clolumn or row that also contains that cell. modification to require a double click to display the calendar?

View 2 Replies View Related

Shortcut Key That Acts Like A Double Click

Jun 15, 2009

In Excel is there a shortcut key the replaces using your mouse to double click to get into the cell?

View 2 Replies View Related

Double Click And Copy Data

Jun 16, 2009

I have a sheet with some 300 plus rows of data. I use filters to sort through the rows to get down to anywhere from 8 to 10 or so rows. At that point I would like to be able to select (doule click) a filtered row of 10 cells (A:J) copy the data and paste it to a different sheet starting with cell B18. I want to be able to perform this process up to 5 seperate times.

I have recorded a macro to do basically what I am trying but with many short falls. It only selects one row, I cannot double click on a row and it dosen't always paste to the proper cell.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved