Dynamic Range Borders Via VBA
Aug 16, 2006
With Range("A12", Range("E65536").End(xlUp))
With .Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
With .Borders(xlEdgeTop)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
With .Borders(xlEdgeBottom)
.LineStyle = xlContinuous
.Weight = xlThin......................
It is supposed to border data from columns A to E for all rows where data exists in column A. (like a dynamic range). How would I change the dynamic reference I have now?
View 5 Replies
ADVERTISEMENT
Nov 26, 2013
What I'm trying to do is put top&bottom borders on ALL cells in a range, not just the margins of the selected area. See spreadsheet below for explanation if required.
Surely there must be a way to do this through Excel menu, tools and whatever.
Alternatively, this could be solved if I knew how to select all rows in a spreadsheet (not Select All), because if I select rows one by one it will obviously apply the borders correctly. Is there a way to select multiple rows then?
View 5 Replies
View Related
Dec 4, 2009
This ia a recorded code to draw borders around cells on a given range
I am sure it can be shortened to 1-2 sentences!
Range("J11:O16").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
View 9 Replies
View Related
Jul 12, 2009
I have a spread sheet I use to track tools. One tool may be checked out / returned several times a week. When I do custom sorting I end up with the Tools listed neatly by date and number. EX: ...
View 10 Replies
View Related
Oct 19, 2012
I'm looking for the least amount of code to apply a border around every cell in a selected range. The standard With Selection approach is to go through six times for the sides, top, bottom, and insides, which results in a lot of code.
I attempted a single code line approach (Selection.Borders.LineStyle = xlContinuous), but I cannot seem to influence the color or thickness of the line. I'm not looking for fancy here...standard xlThin in black color is all I need.
View 3 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Jul 15, 2014
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
View Related
Oct 28, 2009
I am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:
=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
View 3 Replies
View Related
Sep 13, 2007
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
View 9 Replies
View Related
Nov 5, 2009
I have a range of data that will grow as the days of the month pass but I need to run calculations on this range. The data is 13 columns wide but the number of rows will increase daily. I remember using a formula in the Define Range that would automatically take into account new additions using the OFFSET function but cannot for the life of me think how exactly to do it.
View 4 Replies
View Related
Jul 7, 2014
Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
View 1 Replies
View Related
Mar 6, 2008
I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:
Method ‘ range’ of object ‘_worksheet’ failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
View 3 Replies
View Related
Mar 22, 2007
I have a spreadsheet containing data in coloumns A to L.
Where all the codes in column B are the same then a border must be placed around all the codes that are the same i.e the border must start in Column A and end with column L.
provide me with the code the will put borders around the codes in column B that are the same ...
View 9 Replies
View Related
Oct 2, 2008
I have created a 4 page chart in landscape with text in each of the 4 columns in the chart.
When I looked at it in print preview the chart did not fill the page and so to widen the last 2 columns I dragged them over to the right hand margin. I am still definitely within the right hand dotted line showing the margin limit.
The problem is that I cannot now put a border line down the extreme right hand column. Every time I click on any of the border instructions in the Font tab nothin appears on the right hand side of the box.
View 9 Replies
View Related
Feb 4, 2010
I am trying to write vba code that will highlight the row in the range if a field is over a certain percent. The column number won't change but the number of rows will. I'd also like the code to automatically work on all tabs of the workbook when a button is clicked.
Data Info:
Currently there are 4 tabs, but can have more/less
Columns used are A:O
Data for shading starts at A3 and should go to however many rows have data and ignore blank rows
Formula should be if data in column E is over 10.00% then the data in that row A:O should be shaded in the color off yellow & have black thin orders
If the data in column E is not over 10.00% then the data in that row should not be shaded but still have thin black borders.
View 9 Replies
View Related
Aug 19, 2007
Is it possible to stop excel from pasting border formating with cell data other than to select paste special-all except borders?
View 5 Replies
View Related
Jan 22, 2014
The attached file works with 3 Drawers and 3 Doors but if I use 2 Drawers and 2 Doors the Borders do not line up. I think the Drawers are right the Doors appears to be the problem.
Same thing happens with 3 drawers and 4 Doors. It has and extra border on the right side.
See Attached : ozgrid cabinet error.xlsm
Also I would like for the Measurements to be in the cell to the right of the left hand border and center across each of the sections.
Change B3 and B4 to 2 then click draw. 3 and 3 work 3 and 4 don't but 4 and 4 does.???
View 2 Replies
View Related
Jul 6, 2009
I want to remove some cell borders for printing so that on paper it will look like 2 separate tables (ie, I want a space between the 2 tables). I have tried removing the borders and changing the colouring to white but they still show.
View 5 Replies
View Related
Jul 9, 2009
i am trying to do the following but having trouble getting my head around it!
if a2=0 then b2:b13=border
View 10 Replies
View Related
Aug 20, 2013
I need to change the thickness of the borders line but I couldn't find out how.
View 6 Replies
View Related
May 19, 2014
A cell on sheet1 needs to count the number of cells on sheet2 (D3:D31) that has a complete (top, bottom, left and right) border. This is my best shot at it.
[Code] .....
Sheet1 cell I input =CountBrds('sheet2'!D3:D31)
One issue, on sheet2 for example cell D4 is merged with E4 and F4 as is every even cell in the D column down to row 30. Not sure if that throws a wrench in things or not.
View 4 Replies
View Related
Jun 2, 2014
Trying to select all cells below the last row of data based on column B and remove borders.
So far I have this.
[Code] .....
View 4 Replies
View Related
Aug 1, 2009
I am using a user form to display a splash screen. In the user form, I have a picture that is being displayed as splash screen for 5 seconds and then it disappears.
I only want to display the picture in the splash screen.
I want to to remove the following three items from the user form:
1 - remove all borders
2 - remove the menu/caption bar
3 - remove the "x" button that allows user to close form.
View 7 Replies
View Related
Apr 29, 2009
This piece of code is run from a form when the user click OK. It dumps the data the user filled in on the form, below the last row on the sheet.
View 2 Replies
View Related
Apr 17, 2007
I have a spreadsheet that has descrptions in column D. Where the descriptions are the same ,
I need the VBA code that will do the following:
1) Sort the data by columns C (descending), G (ascending) & E (ascending)
2) Putting a border around all the data where the decriptions are the same
i.e from column A to Column I beginning from row 2
I have attached a sample file for ease of reference....
View 9 Replies
View Related
Jun 27, 2009
i have just recorded a macro to put thin borders in columns L and M, but it needs cleaning, ...
View 9 Replies
View Related
Jun 20, 2006
I have designed a form with Grey horizontal borders.
When I print to my HP LaserJet 2420, the borders are black.
I have other forms with Grey borders where the borders print Grey.
I have not chosen to print Black and White in Page Setup.
How do I correct this?
View 6 Replies
View Related
Mar 29, 2007
I have a report that is imported into excel with all thick borders. Does anyone know a VBA code (or simpler way) to change all of these borders to skinny borders?
View 4 Replies
View Related
Jun 19, 2009
I have this macro named ABC to bring the name ranges to another worksheet. The name ranges are already saved in the workbook with the below name range. I used "***" so that this formular can go to the last cell that has "***" on A column and it worked untill someone typed "(xxx)" and the range now stops right before the "(xxx)"
=OFFSET(Storage_Team2!$A$1,0,0,MATCH("***",Storage_Team2!$A:$A,-1),37)
What would be the best to create the range according to the specific words in a column?
View 9 Replies
View Related
