Dynamic Range Used Named Cell Range

Jul 7, 2014

Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.

Range("DataSummary),(??,??) doesn't work.

View 1 Replies


ADVERTISEMENT

Reference Last Cell In Dynamic Named Range

Nov 14, 2006

In the attached spreadsheet I am trying to always reference the sum column from Qty in Det Est.

This is because the number of roads changes for each project.

I created a dynamic range name surfacing with the following formula:
=offset(qty!$a$1,0,0,counta(qty!$A$A), counta(qty!$1$1)).

My question is what formula do I use to reference the sum column for each row on the Det Est Sheet.

View 4 Replies View Related

Dynamic Named Range Sort Including Cells Outside Defined Range

Apr 3, 2008

Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:

=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)

When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....

View 9 Replies View Related

Dynamic Named Range = Last Used Cell In Column; RC In Formula

Apr 28, 2009

Can you use Row & Column numbers in a Formula the way you can in VBA?

I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula
because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)

Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C
(it would = 470)

Also I have an existing Named Range HeaderRowNum (it = 16)

Currently I have a LOT of formulas like:
=SUMPRODUCT(($E17:$E470)*(--(CO17:CO470>0)))

problem is any new data must be added between Rows 17 & 470

So I would like to create dynamic new forumlas to read like:
SUMPRODUCT( (Cells(HeaderRowNum+1,5) : (LastUsed Row,5)) * (--(Cells(HeaderRowNum+1,93) : (LastUsed Row,93))>0) )...............

View 5 Replies View Related

How To Only Allow Multiple Cell Selection If Named As Dynamic Range

May 13, 2014

I have a spreadsheet where I've disallowed selection of multiple cells using the code in the 2nd box below, but is there a way to override this protection to allow selection of a named range? My reason for doing so is to open this workbook as read only from code in another workbook and copy the entire table. My code for doing that works ok (I frequently use it in other workbooks) but, in this case, my need to disallow selection of multiple cells in this particular worksheet is tripping me up.

This is the code I'm using to try and pull the data into another workbook:

Code:

Workbooks.Open Filename:=ThisWorkbook.Path & "RSL-Jobs-Register.xls", ReadOnly:=True
Application.GoTo Reference:="JobsTable"
Selection.Copy

and this is the code I have in RSL-Jobs-Register.xls which is preventing me from selecting the (dynamic) named range called "JobsTable".

Code:

''' I'm thinking I could have something here like (in plain English) "If selected range "JobsTable" Then"
''' (apply the code below) but I'm not sure of the code

If Selection.Cells.Count > 1 Then
MsgBox "Sorry, operations on multiple selections aren't allowed here", vbCritical
ActiveCell.Select
Exit Sub
End If

The formula for the dynamic named range called "JobsTable":

=OFFSET(Jobs!$A$2,1,0,COUNTA(Jobs!$A:$A)-2,11)

View 1 Replies View Related

Creating Named Range Taking Avg To Date Of Dynamic Range

Jul 15, 2014

I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.

View 1 Replies View Related

Convert Dynamic Range To Static Named Range

Sep 13, 2007

My searches have not produced anything that I could apply to this situation.

I'm trying to write VBA that would:

1. Search a Workbook for Dynamic Ranges.

2. When a Dynamic Range is found the code would:

A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"

3. Save Changes.

4. Close File.

My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.

View 9 Replies View Related

Dynamic Named Range :: Does Not Copy The Formula That References A Cell From Another Line

May 29, 2007

I am having a few problems with dynamic named range in excel 2000.

When adding new data to the range, excel extends the range correctly, but only copies some of the formula correctly. It does not copy the formula that references a cell from another line.

I am trying to create a excel spreadsheet and have a formula =e10-e9, which does not copy down.

View 10 Replies View Related

Dynamic Named Range ..

Dec 30, 2008

I need to create a dynamic named range called "DIVLOC," that corresponds to a sheet called Divloc_List in the workbook. Then, I need to take this range and perform a vlookup against it. I tried to create the range in the sheet itself (it wasn't dynamic), and then used that in the vlookup in the vba code, but I got error 2402 (I think). I'm not sure how to define the dynamic range in vba code, and then use the range in the vlookup.

View 9 Replies View Related

Dynamic Named Range Somehow Changes

Jan 4, 2009

what would cause the formula for a dynamic named range to keep changing on its own? I enter the following formula:

OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!D:D),1)

Which I save and somehow gets changed to the following formula:

OFFSET('Raw Data'!$D$2,0,0,COUNTA('Raw Data'!XFD:XFD),1)

This is happening to several named ranges I created. Iíve tried to correct this by editing the formula which seems to work but changes again. Iíve also deleted the named range and recreated it with the same change process taking place.

In case it matters the named ranges are being created on a table imported into Excel via MS Query.

View 9 Replies View Related

Dynamic Named Range

Nov 6, 2009

I am trying to create a dynamic named range to select a list of text entries from a number of different columns that I am using for Data Validation. The columns have entries of variable length, none more than 30. What I am seeking to achieve is that having selected a heading in cell C3 the available list in DV dropdowns elsewhere are governed by the contents of C3.

I have created a defined name, StartPos that uses the contents of C3 to evaluate to the cell reference (e,g $H$4) of the topmost cell in the relevant column. However when I try to use it in the usual formula

=OFFSET($A$1,0,0,COUNTA($A:$A),1) formula I try

=OFFSET(StartPos,0,0,COUNTA(StartPos:[ ],1)

I get stuck at what to put in the brackets. Ideally I would like to use the COUNTA to go down to the last entry in the column. However, even when I try to give the range a height of 30 rows:
=OFFSET(StartPos,0,0,30,1) I still get an error.

View 9 Replies View Related

Determining If Cell Is Part Of Named Range And What That Named Range Is?

Aug 16, 2014

Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:

Code] .....

here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.

View 5 Replies View Related

Dynamic Named Range With GETPIVOTDATA

Jun 18, 2013

I want to create a charts on a pivot table, but I don't like the way Pivot charts function and the limitations they have.
So I want to create a normal charts that is dynamic and based on a pivot table.

In order to do so, I want to create dynamic named ranged for the data in the pivot table to use for the data series for the chart.

I can reference the week numbers (headers in the pivot table) for one data series and get the data by this formula:

=OFFSET(Weekly!$C$15,0,0,1,COUNTA(Weekly!$14:$14)-1)
$C$15 is the first cell that holds the data for the series.
Row 14 holds the week numbers (headers in the pviot)

However, I want to make that formula even more dynamic by having it reflect the changes done to the pivot table who's cells it references to.

So how do I do this using the GETPIVOTDATA function? (or some other function that makes it dynamic and reflect changes done to the pivot table and accounts for the row numbers with the data can change)
If I generate the GETPIVOTDATA formula and try to substistute the fixed cell reference for $c$15 with it, the OFFSET formula for the dynamic range gives an error.

And how can I grab the column headers (week number) dynamically?

View 1 Replies View Related

Dynamic Named Range Changing?

Feb 25, 2014

I am doing an Advanced Filter, and I am using a named range in my VBA code that decides the Criteria range.

The dynamic named range is called 'Criteria' and this is the code:

VB:
=OFFSET(Sheet1!$A$2,0,0,Sheet1!$BZ$23,41)

However, when I run the VBA code, although it works perfectly, afterwards the named range has changed to:

VB:
=Sheet1!$A$2:$AO$3

I just want this to remain unchanged, as it works great. This is my VBA code:

VB:
'Filter and send data to new sheet
Sheets("Sheet2").Select
Cells.Select

[Code]....

View 4 Replies View Related

Offset Dynamic Named Range

Jul 23, 2014

I know how to create a dynamic named range so that no blanks appear in my data validation list but have only ever done this for a list in a column, i.e...

-----A-----
1--Apple
2--Orange
3--Pear
4--Bannana
5--
6--

A1:A6 would be named Fruit, then name manager, edit: =OFFSET($A$1,0,0,COUNT($A1:$A6),1)

The Data Validation list then shows Apple, Orange, Pear, Bannana. And if I add Peach into A5 later, that then appears in the list.

What I need though is to edit this as if the named range 'Fruit' covers cells A1:F1.

------A---------B-------C--------D-----------E-----------F
1--Apple---Orange---Pear---Bannana---
2--

View 7 Replies View Related

Dynamic Named Range With Dates?

Mar 4, 2014

create a dynamic named range with dates.

Example file. !

Dynamic-test-sheet.xlsx

I need an dynamic named range for column B(Project) with a date criteria.

so for example: I need a range with all records from Colomn B(Project) from year 2013.

I want to use this range to filter all unique projects by year.

I have already a filter/formula to collect a unique list of all projects.

View 9 Replies View Related

Dynamic Named Range But Unselect First Set?

Aug 16, 2013

I have a named range in a column for January data (non-contiguous cells). Every month I insert new data in the column to the right. Is there a way to have a dynamic range that grabs the same exact cells but in the new column but unselects the previous month data? Spreadsheet attached.

View 1 Replies View Related

Add Item To Dynamic Named Range

Dec 13, 2009

In the attached workbook, I have identical sets of data in column A separated by an blank cell. I need a macro for the user form that i need to build. The code needs to find the end of each named range, (Range1,Range2 and Range3), to insert blank row at the end of each range and to copy the value of the textbox from the user form in each row so to keep the sets of data identical.

View 9 Replies View Related

Refers To A Dynamic Named Range

Jan 13, 2010

My file has a code that refers to a dynamic named range. When I run the macro that range gets corrupted and I cannot figure it out why. before the macro the named range refers to:

=OFFSET(Manager!$A$1,0,0,MATCH("*",Manager!$A:$A,-1),3)

and right after I run the macro it turns to:

=OFFSET(Manager!#REF!,0,0,MATCH("*",Manager!$A:$A,-1),3)

View 2 Replies View Related

Dynamic Named Range With Userform?

Oct 20, 2011

I have dynamic named range that lists by columns. I can use this with data validation pull down on my worksheet and all is fine. But when I use this named range in the RowSource of a combo box in a userform, I only get the first column of data, or basically, the data in B1, but not C1, D1, ect. Here is the formula for the named range.

=OFFSET(INFO!$B$1,0,0,1,COUNTA(INFO!$1:$1)-1)

View 2 Replies View Related

Get Values From Dynamic Named Range With VBA

Feb 7, 2013

How can I retrieve the values from a dynamic named range with VBA?

Let's say we have created a dynamic list with the OFFSET function, how can I get the values of that dynamic range?

View 9 Replies View Related

Is A Dynamic Named Range The Answer

Jun 1, 2007

I have a sheet containing three drop down boxes which gives me a count of data in a table matching the criteria. (Between 2 dates and equals a depot name).

I am trying to create a chart to only show this data, but I don't want to do it using a pivot table as the end user has no understanding of them and just wants to fill in drop down boxes.

I am beginning to think that using a Dynamic Named Range might be the answer. I believe I am able to achieve what I want with this process but I am not entirely sure how to do it.

View 11 Replies View Related

Keeping A Named Range Dynamic

Sep 13, 2009

In the following line of code in my subroutine I name this range
which runs from A2:J2, the problem is later in the routine I delete certain unwanted columns which then shrinks this range. I always want it to be 10 colums wide. How do I make it dynamic with vba?
ActiveWorkbook.Names.Add Name:="TranslateShow", RefersTo:=Worksheets("TemplateTest").Range("$A$2:$J$2")

Can I also substitute the workbook actual name for ActiveWorkbook?

View 9 Replies View Related

Dynamic Named Range Without Offset()

Oct 15, 2009

When I make a dynamic named range, I typically do something like:

=offset($A$1,,,counta(A:A),counta(1:1))

I remember awhile ago I saw (within some of the comments on Jon Peltier's site, I believe) a way to make a dynamic named range without using offset. Does anyone know how to do it?

View 9 Replies View Related

Dynamic Named Range Cause Crashes

Jan 4, 2010

Anyone run across this.....Over the past 1-2 years...I have setup a number of complex excel workbooks, that automate a lot of reporting for my employees. Suddenly, over the past couple months, I am finding that if I try to go back and edit many of my named ranges (created a while ago) that were created dynamically: "=OFFSET(Sheet1!$A$4,0,0,COUNTA(Sheet1!$A$4:$A$65000),4)"...excel crashes. I can't figure out why.

All I have to do is simply CLICK in the "Refers to:" field of the "Define Name" window (for the dynamically named range)....and I get "Microsoft Office Excel has encountered a problem and needs to close. We are sorry for the inconvenience."

If I drill down on "What is in the report", I see this "Error signature":..

View 9 Replies View Related

Disable Dynamic Named Range

Jul 19, 2007

How can I DISABLE dynamic named ranges ACROSS worksheets? Is there an option or code?

View 3 Replies View Related

Add Dynamic Named Range Via Code

Nov 30, 2007

I am using follwoing piece of code for offset function. For Some reason it is not working.

Reference = Cells(TableRowNumber, TableColumnNumber).Address
Col = Application.WorksheetFunction. CountA(rngF.Columns(TableRowNumber, TableColumnNumber).EntireColumn)

ActiveWorkbook.Names.Add Name:=TableName, RefersToR1C1:= _
"=OFFSET(Reference,0,0,Col-3,1)"

Col value is also being calculated to zero. TableRowNumber and TableColumnNumber are the variables which store the starting location of the column.

View 2 Replies View Related

Charts With Named Dynamic Range

Feb 6, 2008

I have a Defined Dynamic Name which is used to select my data. How do I call that when I create a chart in excel within the data source, so that the data source always refers to this dynamic range.

I have data A B C D E
1 2 3 4 5
9 4 5 6 7

this is so the series names will be the row and for each series the rows represent the data within each of the columns. I have a dynamic range that always selects the whole range called chartdata. How do I put that in the data source when it asks me in Excel 2007 as there is no wizard for seprate x and y ranges in this version.

View 4 Replies View Related

Dynamic Named Range Without Blanks

Jun 17, 2008

I need to populate a cell with a dropdown list via data validation. The source is a list that contains blanks both in between data and at the end of the list. Like this:

John
Peter
(BLANK)
Ann
(BLANK)
Carol
(BLANK)
(BLANK)
(BLANK)
etc.

The blank cells are actually not empty, but contains formulas (and I therefore assume I cannot use COUNTA for leaving them out).

Anyone knows how to create a source list for the data validation dropdown list that leaves out any blanks (containing formulas) in the middle and the end of the range?

View 4 Replies View Related

Dynamic Named Range Not Recognized In Formulas?

Dec 30, 2013

I have a Dynamic Named Range (Entries) that shows in my Name Manager...but is not being recognized in formulas.

The range is defined with a standard DNR formula, and selecting the code in Name Manager highlights the Dynamic Range.

[Code].....

But, when I use the NAME in a simple formula, I get an error. (#NAME?)

[Code] .....

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved