Error On Data Transfer Between Sheets (Method 'Range' Of Object '_Global' Failed)
I get an error message on the "Range(lstRow).Select line. (Method 'Range' of Object '_Global' failed). My goal is to transfer a specific range (C24:H24) to the first available row in Data Entry sheet.
View Complete Thread with Replies
Related Forum Messages:
Run-time Error '1004' :: Method 'Range' Of Object'_Global' Failed
I am trying to create a macro in my personal macro book such that whenever any workbook is opened the calculation settings (tools, options, calculation tab) are set to semiautomatic and do not calculate before save. The macro works when I am opening Excel itself (Book1) but when I open an already saved file it gives me
Run-time error '1004'
Method 'Range' of object'_Global' failed
From there I choose Debug, the VBE window comes up, and I hit F5 to continue the code without doing any actual debugging. Here is the code that I am using. This is in the Personal Macro book on the "This Workbook" section....
Run Time Error 1004 - Method 'Range' Of 'Object'_Global' Failed
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far...
When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code
Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])"
is highlighted in the debugger.
Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
"Run-time Error '1004', Method ' Range' Of Object '_Global' Failed"
I keep getting this "Run-time error '1004', Method ' Range' of object '_Global' failed" Here is the code that has the problem:
Dim i As Long
Dim j As Long
Dim lDup As Long
Dim lRow As Long
Dim NoDupes As Collection
Dim rRng As Range
Dim Rng1 As Range
Dim Rng2 As Range
Dim Rng3 As Range
Dim Swap1 As Variant
Dim Swap2 As Variant
Dim wks As Worksheet
Private Sub UserForm_Initialize()
For lDup = 1 To 3
It does not even loop once though the original UserForm_Initialize For/Next loop.
Mail Merge Error (Method 'Range' Of Object '_Global' Failed)
i'm tring to reuse this code which creates a label on excel. The data used to create the labels is on the "Data" sheet and the labels are generated on the "Label" sheet.
The problem is the first time i run it it generates the labels, then whenever i try again it gives me the following error; Method 'Range' of object '_Global' failed. Each row on the "Data" sheet repreents a label.
Error Method 'sheets' Of Object '_global' Failed
The following bit of code has been working fine but has now started getting the following error;
Method ' sheets'of object'_global' failed
This kicks in on line 3.
The worst thing is it will not let me get into the workbook at all
'Update Names on Sheets
If Sheets("Daily Visits May").Range("e1") = "y" Then Goto 10
If Sheets("Daily Visits May").Range("d1") > 38837 Then Else Goto 10
Worksheets("Daily Visits Apr").Range("B5:C1500").Copy
Worksheets("Daily Visits May").Select
Run-time Error '1004': Methd 'Range' Of Object '_Global' Failed
I have constructed the following code to set the print area of worksheets that have been selected to print to the range referenced in a worksheet level named range "xPrintArea". This named range is set using the OFFSET function. The procedure also sets the left footer to be a copyright notice that is also contained in a cell referenced by a named range.
Set oPrintArea = Range(sPrintAreaName)
is generating the error "Methd 'Range' of object '_Global' failed".
Note that the line
Set oCopyrightNotice = Range("CopyrightNotice")
does not generate this error. From what I've been able to determine from other research on this forum and others, I believe the problem is that I need to more fully qualify the object which Range(sPrintAreaName) is referencing. I've already tried to use
Set oPrintArea = wkSht.Range(sPrintAreaName).................
Run-time Error '1004' Method 'Add' Of Object ' Sheets' Failed Adding Multiple Sheets
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
Run-time Error '1004' Method 'Range' Of Object '_Worksheet' Failed
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed.
The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
Method 'Add' Of Object 'CommandBarControls' Failed (run-time Error '-2147467259')
i get this error on the line in bold Method Add' of object 'CommandBarControls' failed (run-time error '-2147467259'). im not sure why its giving that problem, but im not very fluent in custom toolbars.
'//The following two procedures add a custom menu to the workbook programmatically//'
'//and then delete it//'
Public currentMonth As String
Dim mybar As CommandBar
Dim myControl As CommandBarControl
Set mybar = Application.CommandBars.Add( Name:="CustomButtons", _
mybar.Visible = True
Set myControl = mybar.Controls _
Method 'intersect' Of Object '_global' Failed
item = InputBox("Please Select Row Number of Child to be Removed")
myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select
I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
Error 1004 Method 'Range' Of Object '_Worksheet' Failed
I have a cet of CommandButtons on sheet 1. The code for these buttons is in the code section of the sheet. A named range is referenced in this code. This named range is on sheet 2. Every time I try to reference this or any named range (from any other sheet), I get this "Run-time error '1004': Method 'Range' of object '_Worksheet' failed"
The last time I had this error I was able to fix it by moving the code to Module1. I tried that here, but it did not work (I can't figure out how to call it from the sheet). CommandButton. Here is the code from the sheet for one of the buttons:
Private Sub TBEnterUp_Click()
iLast = Range("WBDate_DayLast").Value '<<<<<<<
iItem = TBEnter.Value
If iItem = iLast Then
TBEnterUp.Visible = False
TBEnter.Value = iItem + 1
If iItem > 0 Then TBEnterDown.Visible = True
It is a simple number advancer. It is working in the UserForm I took it from. I have included a sample file of the problem. Feel free to look at it and borrow anything in it that you might like.
Method 'Range' Of Object '_Worksheet' Failed Error
I start in my "Action Plan for For Single Market" worksheet and if I click on the Command Button I then want to read in a couple of variables, and jump to a second worksheet (called "Market Action Plans") where I then want to copy a range, and then paste it in another area in that same sheet.
I thought I had worked out what to do, but when I execute I get a "run-time error 1004" when the macro gets to the "Range("Updated_Results").Copy" line. Excel describes the error as "Method 'Range' of object '_Worksheet' failed'" - which might as well be a foreign language as far as I am concerned!
Private Sub CommandButton2_Click()
Current_Market_Row = Range("Current_Market_Row")
First_Col_Action_Desc = Range("First_Col_Action_Desc")
Sheets("Market Action Plans").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
Sheets("Action Plan for Single Market").Select
I am an occasional macro-creator and every now and again, I come across this type of problem where I can't get variables to be reconized, etc. I think it's because I don't understand enough about Private versus Public, and how to declare variables.
Method 'Range' Of Object 'Global' Failed
I have a button on my spreadsheet which activates some code, it has worked perfectly for over a year but now for some reason I cannot get it to work.
When I click on the button now I get the message: Run-time error '1004' Method ' Range' of object '_Global' failed.
the file is far too large to attach here but here is the relevant ...
Method 'value' Of Object 'range' Failed
I have a while loop in which I'm updated information in 2 separate worksheets. I'm using the With-block statements separately to update each, but after the 30th iteration (and it's always on the 30th), the VBA code halts and get the "method 'value' of object 'range' failed" error message pointing to a line with the code as follows:
.Cells(lngRow, 9).Value = intMonths
where "intMonths" is an integer variable which I'm populated properly, and "lngRow" a long variable. When I debug both variables have proper data in them, and I have no idea why this is bombing.
Error 'Method Range Of Object Global Failed' On FindNext Method
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
Method 'Add' Of Object 'CommandBarControls' Failed
The following code below was very kindly created for me by someone approx 12 months ago and I have been using it without any problems at all.
The purpose of the code is to creates a new Menu/Title item named "Quality" on the main Excel menu bar at the top of Excel and place it between the "Windows" and "Help"
This new Quality menu then has further drop lists which i can add as suited.
Two days ago i started getting the following RunTime Error everytime i open Excel and i can not longer get the new menu "Quality" to show on my Excel menu bar.
run-time error '2147467259 (80004005)':
Method 'Add' of object 'CommandBarControls' failed ........
Method 'copy' Of Object '_worksheet' Failed
From the current open book, I'm opening a 2nd book, then copying all worksheets from the 2nd book that meet criteria, into 1st book, (in the same order), but am getting Method 'Copy' of object '_Worksheet' failed error. What am I doing wrong?
How to OVERWRITE worksheets?We'll be running the same process with new data, so also need to overwrite worksheets in 1st book.
Dim FileName As String
Dim Wkb As Workbook
Dim Ws As Worksheet
Dim WNum As String
Dim Tnum As String
Dim RegionNo As Integer
Dim Original_Wb As Workbook
. ScreenUpdating = False
.EnableEvents = False
.DisplayAlerts = False
Set Original_Wb = ThisWorkbook .........................
Method 'location' Of Object '_Chart' Failed
I'm currently working on a fairly complex VBA project in Excel 2007. Basically though, I'm downloading information from a site, massaging it, creating a lot of graphs, saving them locally, deleting the chart from excel. I then save a copy of the workbook to a local file, clear the Spreadsheet, and then Do the same for information from another site.
When I had all of the code in one Module and ran it as a macro it ran flawlessly.
Now i've put the information into a Class. And am pretty much running the same process via a UserForm.
The problem I have though is that at any point after I execute the (and please assume that all variables have been declared, because they have)
Method 'Route Object'_workbook' Failed
If IsEmpty( Range("D67")) Then
Range("D67").Value = Application.UserName
ElseIf IsEmpty(Range("E67")) Then
Range("E67").Value = Application.UserName
Range("F67").Value = Application.UserName
I am clicking on a an approve button which executes this code. But when I click the button the error reads: Run-Time error 1004, Method 'route'object'_workbook'failed.
Method 'range' Of Object 'worksheet' Fails
I'm trying to accomplish the following: on "LogSheet" sheet, click on the DailyCloseButton and have various lists on the "lists" sheet automatically sorted before I save and end. The code below gives an error: "Method ' Range' of object '_Worksheet' failed". I have no idea why it failed.
Private Sub DailyCloseButton_Click()
' DailyClose and sort routine
Range("Products").Sort Key1:=Range("Products").Cells(2, 1), _
Order1:=xlAscending, Header:=xlYes, OrderCustom:=1, MatchCase:=False, _
Network Printer 'ActivePrinter' Of Object'_Application' Failed
I am having trouble printing a page to both a local printer (which works fine) and a network printer (which does not work) Both printers are installed on the Computers. The error message I get when I try to run the macro is Run-Time ERror '1004': 'ActivePrinter' of object'_Application' failed. The codes that I have used are
Application.ActivePrinter = _
"\SAUWTPFS01.sopac.pilkington.netDespatch Toughend & Batch reports (L164) on Ne05:"
Application.ActivePrinter = _
" \sauwtpfs01pauwtp0305 on Ne05:"
Application.ActivePrinter = _
It works on the day I record the macro. As soon as the next day comes around I get the error message. When I click debug it is these lines that are highlighted in yellow. I have looked at this for several days on and off and I always get the same error.
Run Time Error '1004' Autofill Method Of Range Class Failed
I found the following code on your forum, but get the following error:
Run time error '1004'. Autofill method of Range class failed.
The error occurs when the spreadsheet either have 1 row of data completed or no data, can I get code to ignore the autofill when I only have 1 row or no rows completed in various spreadsheets. I have attached a copy of the spreadsheet.
Run-time Error '1004' : Select Method Of Range Class Failed
I have a userform that allows the user to view, modify or delete individual records (rows) of a worksheet in a workbook. If a particular item in a record is modified, a check occurs to ensure that the values for that item remain unique. All of that works exactly the way I need. The breakdown occurs when the records are then autosorted by a the values in a particular column. After the autosort, another column of values is copied and pasted to a different worksheet within the same workbook. For this to work properly, I must have the userform open along with the worksheet containing the records. If the userform is open with any other worksheet open, I get the following VBA error message "Run-time Error '1004' : Slect method of Range class failed". I need to be able to open the userform with any worksheet active and not experience this error when the autosort, copy/paste occurs. This is the code for the user form, the module for autosort, copy/paste and checking for unue values.
This is the sub in the worksheet with the records
'This checks for unique values
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim LLoop As Integer
Dim LTestLoop As Integer
Dim Lrows As Integer
Dim LRange As String
Dim LChangedValue As String
Dim LTestValue As String
Dim smessage As String
'Test first 7 rows in spreadsheet for uniqueness
Lrows = 8
LLoop = 2
'Check first 7 rows in spreadsheet
While LLoop <= Lrows.........................
Run-time Error '1004' Pastespecial Method Of Range Class Failed
I am using the following code and I'm getting a Run-time error '1004' error. When I reconstruct the macro one line at a time and run the macro between adding each new line - no error. After reconstructing the macro in its entirety, I can run it once with no error. However, if I try to run it again immediately after that, I get the error and I keep getting the error every time I run it from there on. I dont understand how it can work once and then stop working. Here is the full
Dim item As Long
Dim myString1 As String
Dim myString2 As String
Dim myString3 As String
item = InputBox("Please Confirm The Row Number Of The Child To Be Moved To The Roster.")
myString1 = "c" & item & ":e" & item
myString2 = "g" & item & ":n" & item
myString3 = "c" & item & ":e" & item & ",g" & item & ":p" & item ..........................
Method 'goto' Of Object Application Failed
why i'm getting this run time error :"Method 'goto' Of Object 'Application' Failed"?
Dim wSheet As Worksheet
Dim rRange As Range
Dim dZoom As Double
Dim wSheetStart As Worksheet
Set wSheetStart = ActiveSheet
Application. ScreenUpdating = False
Set rRange = .VisibleRange.Cells(1, 1)
dZoom = .Zoom
Run-time Error 'PasteSpecial Method Of Worksheet Class Failed'
I have a pretty simple macro that I recorded and attached to a button. The macro is:
ActiveSheet.PasteSpecial Format:="Text", Link:=False, DisplayAsIcon:= _
The user opens the file that contains this macro, then runs a report from a website that dumps into an excel file. They copy the data from the Book1 output, then click the button to paste it into the template. If done this way, it works fine.
However, if they run the report and get Book1 THEN open the file containing the macro, they get a run-time error 'PasteSpecial method of Worksheet class failed' on the 'ActiveSheet.PasteSpecial... line
Worksheet Copy: Method 'Copy' Of Object 'Worksheet' Failed
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004':
Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
How To Restrict The Cell Data To Letters 'a' Through 'e' AND 'A' Through 'E'
I am trying to come up with an excel shee which can track the progress of a student on practice exams. This exam only has multiple choice questions, with answer choices A,B,C,D or E.
What I am looking for
1) I want to restrict the cell data to A,B,C,D or E (both cases). Note that I am not looking for a drop down/combo box. It would take the user to use one or two mouse clicks to drop down the list, and I am not in favor of that.
2) I would like this validation/formula to be applied to all the cells in a particular column.
If the user enters a lower case letter, then I would like to convert to upper case.
Run-time Error '429' ActiveX Component Can't Create Object
I am trying to generate excel report output from access by click of a button. Part of the code is as follows:
Dim lngColumn As Long
Dim xlx As Object, xlw As Object, xlc As Object
Dim DBS As DAO.Database
Dim rst As DAO.Recordset
Dim blnEXCEL As Boolean, blnHeaderRow As Boolean
blnEXCEL = False
'If we do not want the first row we set Header to false
blnHeaderRow = False
'Establish an EXCEL application object
On Error Resume Next
Set xlx = GetObject(, "Excel.Application")
If Err.Number <> 0 Then
Set xlx = CreateObject("Excel.Application")
blnEXCEL = True
I worked on development on a server and worked fine. However when I have moved the code and database to the desktop of mine I am having
the following error in the line
Set xlx = GetObject(, "Excel.Application")
Run-time error '429'
ActiveX component can't create object
Run Time Error '1004' Autofill Methodof Range Class Failed
I am trying to autofill a range of cells in column L (12). I first copy the formula and add an equal to (=) sign to it. then this is copied to cell L14 (The first cell of the intended range).
After this I find out the last filled row (using FOR loop and a counter 'c').
After this I use the Autofill option but I get an error.
Run time Error '1004':
Autofill methodof Range class failed
Run-Time Error '1004' Cannot Open PivotTable Source File 'Consolidated Report'
I have a macro that takes the date from different excel sheets, consolidates the data and renders the pivot table and chart accordingly. It was working fine when the date range defined for the pivot table was static. Now I have made it dynamic since the data range changes each month depending on the number of days it has got. When I run the macro, it runs succesfully, generates the report and save & close the report, but after that I am getting this error. Errorneous
Using 'IF' With Conditional Format (change Cell Color Based On The 'P' Or 'F')
My cell has a 'P' or an 'F' plus some additional text. I'm trying to change cell color based on the 'P' or 'F' but I can't get it to recognize the letters.
Samples of what I've tried:
I can 'FIND' the 'P' or 'F' but there may be a P or F else where in the cell so the color may come up incorrect. I'm trying to get it to just look at the first character in the cell. Can the 'IF' be used with CFs?
Run-time Error '91' When 'On Error Goto' And Cells.find
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
Run-time Error '1004' :: Copying Data From Other Sheets By Macro
I've been trying to use the below code,
'This will copy data from all sheets of the selected workbooks
'To a sheet named 'Data' in the sheet in which the macro is run from
Dim pasterow As String
mainsheetname = ActiveWorkbook.Name
MsgBox ("Please select spreadsheets to combine")
filestoopen = Application.GetOpenFilename(MultiSelect:=True)...
Run-Time Error '424': Object Required
I have an Excel workbook that I have built in user-level security to log into. If login is successful I have code like this:
If 'successful conditions
'more code here that doesn't matter
'verfies that it is a new project
lgCreateProject = MsgBox("Would you like to create a new project?", vbYesNo)
'opens a userform if new project
If lgCreateProject = vbYes Then frmQuoteInfo.Show
If the user signs on successfully and is not starting a new project then they get the error noted in the title of my thread.
Run-time Error '424': Object Required...
Then the change event in the ComboBox of TB5 stopped working with the above error message.
Private Sub TB5_Change()
'Loads TB6 thru TB16 from TB5's RowSource
i = 0
If Not TB5.ListIndex < 0 Then
For i = 1 To 12
If Not i = 1 Then Me.Controls("TB" & i + 4).Text = TB5.List(TB5.ListIndex, i - 1)
The segment that is erroriung out is:
Me.Controls("TB" & i + 4).Text = TB5.List(TB5.ListIndex, i - 1)
The first time it errored debug said there was a type mismatch. That only lasted about 15 min before it changed error message to the one in the title. Debug highlighted this same code segment for both.
TB5's original RowSource is "FoodList_2" which is 12 colums wide and variable number of rows. After picking the item from the first column this code fills in the rest of the data for the chosen row. I'm not sure how wide the rowsource is with the find code.
Error - Number:429:' GetObject. ActiveX Component Can't Create Object
VBScript code snippet below is being used in an ASP page but the call to GetObject never attaches to a running instance of Excel. Since visible property is set to True, I can see the instances accumulate in the TaskBar each time the ASP page is called, so there are obviously instances to attach to.
Set excelApp = Server.GetObject(,"Excel.Application")
If (err <> 0) Then
Set excelApp = Server.CreateObject("Excel.Application")
excelApp.UserControl = True
excelApp.Visible = True
excelApp = Nothing
GetObject errors out with the following error: Error - Number:429 Source:Microsoft VBScript runtime error Description:ActiveX component can't create object