Excel 2007 :: VBA Change Pivot Table Filters Using Form ComboBox In Another Sheet
Jun 26, 2013
I'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE"
I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday Dig Drive
Dave 4 5
Bill 2 7
Tuesday Dig Drive
Dave 2 7
Bill 8 1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig Drive
Dave 6 12
Bill 10 8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row Column Value
Bill Dig 2
Bill Dig 8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
I have pieced together a VBA script to create a pivot table. Which is all great and works fine BUT for some reason it is now forcing the table onto a new worksheet. see code below, why it might be creating a new sheet. Alsothe sheet Worksheets("TICKETS BY OWNER & DAY") does exist.
Code: ' HERE WE CREATE THE PIVOT TABLES AND CHARTS FOR REPORTS Dim WSD1 As Worksheet Dim WSD2 As Worksheet Dim WSD3 As Worksheet
I have 3 pivot tables and with 3 filters each (they are all the same filters). I just want to change 1 of the filters for each of the pivot table (meaning the other 2 stay the same for all of the pivots). Is it possible to have a filter change automatically to match a filter in another pivot?
I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.
I have a pivot table in Office 2007. I want to filter the last column such that the values in the data area are greater than a certain number. But all those filter options are grayed out. The only option available (and working) is to select the top n entries. So clearly a reference into the data field to filter a column works, but why not by value?
1. Age (up to 20, 21-30, 31-40) 2. Gender (male, female) 3. Location (London, Paris, Berlin)
I want to see Age and Gender as column labels and Location as row labels. However, I don't want Gender as a sub-set of Age - I want Age Labels followed immediately by Gender labels ie:
Upto20 / 21-30 / 31-40 / Male / Female
I don't want: 21-30 Male / 21-30 Female / 21-30 Total / etc etc..
In Excel 2003 I created a macro that copied data from a table, pasted into a new sheet, created a pivot table, copied and pasted that data next to pivot table, sorted, copied and pasted into chart data. I've used this macro in Excel 2007 with no problems.
Now I'm trying to create a similar macro but it won't complete the pivot table. My Pivot Table Field List should have the Row Label and Values populated but when I run it all that is populated is the Values field.
Is there something in 2007 that will not allow me to create a macro using a Pivot Table or am I doing something wrong? The code is below if that helps ...
filter a pivot table that contains these 3 column fields: User 1, User 2, and User 3.
However, when I want to see the results for "John" in all those fields, I need to use one filter at a time. Is there any other way to see all results of the Pivot Table where "John" is a User, no matter if he is the 1, 2 or 3 user?
I have A3 and A4 as report filters in the pivot table. Is there any way can combine A3 and A4 into one cell. The new cell is something like drop-down list contains contents from A3 and A4. When picking up the from this drop-down, the corresponding data list will be shown (like the data in B3 and B4).
I am trying to arrange data (pay by week) for regions and sites within a region. In the first Report filter, I select the site, and the second report filter gives me all of the sites - not just those in that region.... How I can either arrange my data or change my pivot, so only the appropriate sites show under the region?
I can't know what fields will be filtered on so, so I need to extract all filters at run time.
I tried activeCell.PivotCell.PivotTable.ActiveFilters and this returns 0 although there are definitely filters available.
The workaround which I'm not is very good I'm considering is:
activecell.PivotTable.PageFields.Items collection which also behaves weird:
activecell.PivotTable.PageFields.Count returns 2 at the same time it has 3 elements: activecell.PivotTable.Item(0);activecell.PivotTable.Item(1);activecell.PivotTable.Item(2)
I have a pair of Pivot Tables with matching Pie Charts that look at Project Costs and Schedules. When I filter one, I'd like the other to filter automatically.
I found these links and used the code that Jerry supplied but I am running into trouble.
pivot table question
Pivot Table- "Master" Report Filter My filters (PivotField names) include Contractor RCEs District Year Month
When I select a contractor from PivotTable1 it does not change PivotTable2.
There is additional code in this workbook that Jerry recently wrote concerning drilldown formatting. It was initially created for a different report but now I use it in many of my other reports. I don't think it's causing the problem, I placed the new code above it (including in the module) and there is a line breaking it up from the new code.
As a side note, I may or may not need to change every filter. In this case I only want to change the contractor, but other times I may want to change other items.
Is there a way to loop through pivot table filters in VBA? In my case, I need to loop through the filter "Month" which contains January - December. For each of the month, I have to select and double click the total cases in each month.
So for every loop, for example,
Pivot 1 January Count
Case 1 2
Case 2 1
Total 3
I need to open the drill down in B3 (this drill down will be opened in a new sheet, Sheet 1), copy the data and paste it in another sheet named "January Cases". Then the code will delete "Sheet 1" and proceed with the same with February till December. Is it possible to loop through pivot table filters?
I have a pivot table that summarizes jobs that need to be completed on a specified date. I need to put that information on a calendar, but I would like to concatenate all information from that date so I can do a vlookup from the calendar. My other problem is that the number of cells change for each date, so I cannot specify exact cells, (some only have 1 entry, but others may have 4 or more). Can I specify a range of cells based on the result of the pivot table?
I have attached the pivot table, calendar and the data sheet with the vlookup info. Am I using the proper calendar or method to find this info?I have struggled with this for over a week now.
I have created a pivot table using a family name in row labels. The names appear in alphabetical order unless the person's name is the same as a month or day of the week. The result is that I have Mr Sun and Mr May at the top of my list, rather than listed alphabetically. Sorting the list does not solve the problem. It switches Mr Sun and Mr May, but does not included them in the main list. Is there a setting I can use that will stop Excel 2007 thinking that these words are something that they are not?
I believe that I am finally getting the hang of pivot tables and VBA ... pretty nice. Now for my latest frustration - calculated fields.
I have a pivot table created which compares two years of data. The problem seems to be that this data is from the same data field (PINSAL) even though it shows in two columns (year 2007 and year 2008).
1 - I need to subtract the 2007 figure (column C) from the 2008 figure (column D) in a calculated field called DollarVariance
2 - I need to divide DollarVariance into the 2007 figure to create a calculated field called PercentVariance
This seems easy to do if I had two different variables used to create the 2007 and the 2008 data but it is the same datafield. Can I use column letter? Can I use the column name assigned by the pivot routine (12 - 2007 and 12 - 2008)?
I have a pivottable that has a calculated field returning a percentage of two other feilds. I have pivotcharted the result and now want to include a median of the calculated feild results on the same chart.
I want to use a pivot chart as it'll accomodate changes to the data range and different page fields.
I'm using Excel 2007. My pivot table seems to be limiting me to 256 columns in the Values/Data area. In researching below I believe that I should be able to have 16,000 columns in my Pivot Table.
[URL] The "Big Grid" and Increased Limits in Excel 2007
PivotTables Maximum rows displayed in a PivotTable report is 1 million. Maximum columns displayed in a PivotTable report is 16,000. Maximum number of unique items within a single Pivot field is 1 million. Maximum number of fields visible in the Fields list is 16,000.
I have a table of data which I am analysing in a Pivot Table. For the majority of the data, the Pivot works very well: however I have a small issue, but it subsequently means the Pivot is useless.
Within the table array that I am referring to, there is a column of data of "Days per employee for a given period". The rows of data within the table array relate to every absence entry per employee, but this final column of data always contains the same figure (although can differ from employee to employee).
When I put the data into the Pivot, I can summarise the absence(s) as a simple sum. However, this final column of data should not be summed, since it is already the sum figure.
This figure though needs to be part of the Pivot, since I need to report on the percentage of absence days per type over the given period. So, the simple representation of =absence day(s)/worked days does not work... well I cannot get it to work. Additionally I have tried features like % of, but nothing.
I have a stripped down data source for debugging purposes. I only have 4 rows of data for test purposes. The dates are formatted as dates.
When I create the pivot table the dates become my column values. When I select the first date in the pivot table the Group By Field menu option is grayed out. I tried setting a tabular format but didn't work.
In Excel 2007 is it possible to filter the "Values" in a Pivot Table?
I am tracking the Gross weight of shipping containers. My table sums the weight of all items in a container by container number. So my rows are 9 digit container numbers and my data values is a Sum of part weights. I want to be able to filter out containers above a certain weight.
for example:
Row Labels Sum of Gross Wt. - Lbs 10003150588929 10003153258700 10003155984958 1000315651530 10003156549761
I know I can simply copy and paste into a new tab and sort it there, but I'd like to be able to do it internal to the pivot table if that is possible.
Using Excel 2007 I have a pivot table that counts that number of incidents based on month and year. To get the month and year I group the date field as months and years.
My problem is if I want to filter specfic months in say year 2012 it also takes out the month in 2013. I though it used to give you the option of year and date in the filter but mines are 2 seperate filters.
PIVOT TABLES -- Old data remains in pivot table filters
One more Pivot Table Question:
I have workbooks i have built and re-use with fresh data after verifying that the previous data has been cleared. Unfortunately there are times in the drop down filter, old data will remain, but is not at all in the data set. How to clear this out? I have ensured that before pasting in new data the old data has been cleared below the headers. I keep my headers so I don't need to re-do the Pivot Tables or adjust the Name / SUM capabilities in the VALUE FIELD SETTINGS.
I have created a pivot table and I'm using report filters for both Client and Asset (obviously there are a lot more data points). When I filter on Client 1 I would expect to only see Port 1 - Port 7 available in the Asset filter however, I see every asset in the data set. I need to pick and choose using the Select Multiple Items check box without having to scroll through every single asset. Is there a way to easily do this?
