Excel 2011 :: Inserting Rows In Checkbook Register
Apr 3, 2013
I've been looking for a free checkbook register template that will automatically calculate the balance as you add or subtract various amounts.
I found one which seemed to be just what I wanted but once I had reached the end of the rows for the worksheet and tried to add more rows the automatic feature quit working.
I found another Checkbook Register which seemed even better than the first one as it had a notation at the end of the rows.
It said to " Insert new rows above this point" and it had the last row greyed out.
I tried adding a new row and tested it out by adding some amount but it did not continue with the automatic calculation either.
Working on a Checkbook Register/Monthly Budget.In column A I have the Check # or Type of Transaction, in column D is Debit, in column F is Credit, and in column G is Balance. I am writing the Check #, Debit, Elect., or Bill in column A.What I want to do is write a formula in column H to find all the Bills in column A and add all there Debit in column D together. I don't know if I change the word Bill to a code # if that would work or not. If it does, could I use a range of number of different bills like 200-299.
Example: If (A2-A50) = "Bill" or (200-299) add the same row # in column D for a total sum.Would like to use the code # if possible so I can budget the Bills individually if possible.
Using the Formula: =IF(ISBLANK(C3),"",G2-D3+F3) in column G for Balance, don't want to mess with this formula.
I'm wanting to make a checkbook register. That part I can do (I am totally an Excel idiot, but I'm fairly decent with Google and I couldn't seem to find anything about this), but I'm wondering if auto-drafts are possible. What I'd like to do is have a table of regular auto-withdrawals (or deposits, for that matter) and then on the appropriate day have them auto enter into the register. Ideally, I'd like them to enter 2-3 days in advance, or even at the beginning of the month.
For example: Netflix on the 1st, Life Insurance on the 12th, Auto Insurance on the 15th, etc.
I have problems inserting new rows in selected files. The files with the problems have a macro. I don't know if the problem can lie within the macro. There is no error message, it just won't insert the new row(s).
For some reason I don't seem to be able to insert any columns/rows/cells in to my excel spreadsheet. This is a problem in both basis sheets and more advanced ones.
I'm building a spreadsheet which includes a few columns which have activex check boxes which are linked to cells. I want to allow the users of the spreadsheet to insert new rows if necessary. Ideally, when these new rows are inserted, the check boxes would also automatically appear in the corresponding columns of the new row (and be linked to the relevant cells), just the same way that pull-down menus and formulas automatically copy into the new row. Is there a way to do this?
What is the VBA code for inserting text in all column B-cells of multiple selected rows?
I am creating a worksheet with a table containing various data related to orders of various materials (this is more or less data gathering from an older, paper-based 'system'). This table spans, columnwise, from A to D and expands downwards as more orders are added. The information in each column is: A=order number, B=type of material and C=material specs. and D=additional comments.
I've set it up so that the only thing I really have to do is to insert the type of material in the cells of column B, and the rest will sort itself out. Instead of having to insert a new row for each new entry and manually typing in the name of the material (these entries are often done in the midst of already existing data), I created several similar, macroed buttons for the different types of materials we use. These macros work by selecting the row of the currently active cell, inserting a new row and then add the name of the material in the column B-cell of this new row. What I am having trouble doing though, is to get the text-entry to work for a selection of multiple cells.
As an example, lets say that I would like to add 5 orders of "Grade A Steel" in the middle of the table - in the row above row 8. With the macro I currently have I can select cell B5, click the macro, and a new row will be inserted with "Grade A Steel" in column B of this new row. This action could be performed 5 times over, but would be easier if I could just mark a range of 5 cells, say B8:B12, click the macro and get the text/data inserted the column B-cells of all 5 of the new rows. So far I've been able to create a macro that inserts multiple new rows, but I've only been successful in filling the column B-cell in the first row leaving the 4 below empty.
I am running Excel 2011 on Mac OS X. I am trying to save a file (.xls) to a server (Autumn). I have tried several configurations to try to get the file saved properly. File name is "Testfile.xls"
When I try this, I get an Error 1004 indicating that it cannot find the file. Do I need to eliminate the .xls and then specify that when I do the saveas?
For Mac Excel 2011, though I think my question would apply to any modern version of Excel.
This is a little odd. I have a sheet where, for various reasons (see below ### if interested), I need to copy a hyperlink, replace a substring, and then return the new hyperlink (with old friendly text) to the original cell. (I actually have to do this with an arbitrarily-long column of links.) This was my plan of attack:
* Pull the URL from the hyperlink cell. * Use FIND and RIGHT to strip out what I need and replace it * Use HYPERLINK to build a new cell with the original friendly text and the new hyperlink. * (Manually) copy this new link (really, a column of links) back to the original cell (really, column of cells).
Here's where it breaks down:
a) If I simply cut-and-paste, the formula used to pull the hyperlink becomes circular (as do several others), and Excel complains. b) If I cut-and-paste-special (values only), I get just the friendly text, no link info. Likewise if I try to reference the "fixed" hyperlink.
The erroneous hyperlinks are in column K. My calculated correct hyperlinks are in column S. (There are similar errors and fixes in L and T, respectively.)
I want to open all csv files in a folder and just copy and paste some columns into another file. I am having a bit of trouble with the following code which can be found at ozgrid and I have modified slightly so it looks in the current directory instead of a fixed path...
Code: Sub RunCodeOnAllFiles() Dim lCount As Long Dim MyDir as string
[Code]....
For starters, if I don't use on error resume next I get a runtime error 445: object doesn't support this action. So when I use the on error resume next, then by the time it gets to the foundfiles line, there are no variables set, so on the next line (workbooks.open) nothing happens.
Is there an easier (more up to date?) method to open all csv files (or excel files) in a folder?
In MS Excel 2011 for Macintosh can I assign a macro to an object, such that if the user clicks the object it runs the macro? That is creating a button on the spreadsheet that will execute a macro.
So i am working on an attendance tracker here. I already have aligned on a separate tab all of the works aligned next to their manager
EX Column A: Column B: Worker Name Manager
What i would like to do is create a drop down menu with all of the Managers name listed to where someone can select that manager and when they do all of the workers names show up in Column A and then that Manager Listed next to them.
Is there a way to do this... I am using office 2011 btw. Once when i get this last part completed with this drop down menu i should be complete!
I have a friend using Excel for Macs 2011 and the column and row headings (ABC & 123) are not showing on the spreadsheets on the screen. How to turn them on. I fgure they got turned off somehow?????
I need to exact some data from a file. I can open the file, but can't see any data of it. I am afraid I need to do some setting so that I can see the data, but I don't know what should I do
I'm using Excel 2011 on a MacBook Pro. Here's my situation:
I'm running a monthly budget report that's got three spreadsheets within the workbook. Spreadsheet #1 is summary sheet with a few pivot tables. Spreadsheet #2 is the data sheet, where all of the information is entered, and is what feeds the pivot tables on Spreadsheet #1. Spreadsheet #3 is just a list page that populates the drop-down list on the second sheet.
As this is a monthly budget report, I'd like to find some way to archive the first spreadsheet (the summary sheet) every month. Ideally, I'd like to be able to create a macro-driven button that, when clicked, does the following actions:
1) Creates a new spreadsheet, with each click, named for the current month and year. 2) Archives the exact contents of Spreadsheet #1 by making an exact copy of its current contents, and places this copy into the newly created spreadsheet. 3) Clears the data from Spreadsheet #1 AND Spreadsheet #2.
To summarize, I'm trying to use a button that, when clicked, runs a macro that archives the current month's data into a new spreadsheet, and then clears the data from Sheets #1 and #2 so that I can start each month with a clean slate. If there's a way to only clear the data from certain cell ranges (as opposed to a complete wipe of the sheet), that would be even better.
How to insert a Calendar Dropdown for Mac Excel 2011? Also, do I have to readjust this (for lack-of-a-better-word) 'add-in' everytime the calendar year changes? This will be used for a payroll template.
My software is Excel for Mac 2011 version 14.4.3 (140616).
I am using the present value formula =PV(rate, nper, pmt, [fv], [type]), with the pmt expressed as a negative number, to determine the present value of a lump sum that would generate specific, equal, regular annual payments, exhausting itself in the process. I fill it in this way: rate is an annual rate, nper is the number of years the payments run, pmt is the annual amount paid each year, fv =0, type =1
I would like to be able to have a similar formula in Excel that would do the same thing except that it would take into account a time period where no payment is made, ie a "delay".
For example using the PV formula I know that if I have $49,019.96 invested at 1%, it will generate $10,000 per year for 5 years, leaving a net investment of 0. I would like to know the formula that would tell me how much I would need to invest at 1% to yield $10,000 per year for 5 years, again exhausting itself completely in the process, with the first $10,000 payment starting 3 years from now. I know it would be less because I would have the full amount earning interest for 3 years at 1% before any payments need to be made.
I am working on a spreadsheet for my Building company. I'm building a tool to price for Fascia, Soffits and Cladding.
I'm using Macbook Pro Microsoft Office for Mac 2011
Please see attached file
The first sheet holds all the lists of products, Category Headings list is in column A and then all the relevant products and prices are then from B to BI. I have defined each category with a name by selecting the cells and entering a name in the name box.
The second sheet is a Calculator in which I would like a to have a drop down list in the Category Column (Which I have worked out how to do myself - good old google) and then a drop down list in the second column which lets the user select from a list of results based on the selection from the previous column.
Example: Category(B3) - 18mm Fascia/Replacement Board (Square White) - Drop down menu taken from sheet 1 A3:A33 Description (C3) - Drop down list containing all the options from D2:D15 Named "FasciaReplacementBoard18mmWhite"
So basically, whatever the user selects in Column B (from the category list) a drop down list would be available in Column C
The Value column would then show a value based on the options selected.
I am using Excel 2011 and we have a link data source to the outside SQL Server.
For the 1st step, I linked to the Database and retrieve the data.
P1.png
2nd step. Sort the data by using the column "Description" Descending. Add another column to the table and put the 1, 2, 3, etc in that column.
P2.png
3rd step. I clicked on "Refresh" and the new column values are not consistent. I mean they are moving. So, I added another row in the database to test and it becomes very obvious. It can be clearly seen at the following image. The value of "A" should always be "10", but it has been changed to "1" after the refresh.
P3.png
how I could retain the position of another column after the data refresh?
I have Excel MAC 2011 and my spreadsheet was created with multiple cell colors randomly throughout the spreadsheet.
I need to change all the royal blue colored cells to "no color" without changing the data contained in the cell. For example; Cells A5:A38 are blue, A39 is green, A40:A50 blue, A51:60 green, ... Cells B5:B15 are grey, B16:B20 are blue, B21 is yellow...
I can't find the "Advanced Options" for Find and Replace that might have allowed me to specify a color change.
I have switched from an ageing Mac Powerbook, Excel 2004 for Mac, and an out-of-date version of Firefox to an IMac with Excel 2011 for Mac and Safari as a browser. The only reason why I mention this is because I don't know if it was easier to do this on an older platform (one of those bizzare situations where going forwards is actually a step backwards).
In short I like doing things with Sports data in Excel. Usually I would hit my favourite website for pulling sports data (which incidentally I don't know if this has changed as I've been too busy to do much of this kind of thing for about 4 months - or if it is just a different format on a newer machine/different browser);
[URL] ....
The link should be showing NFL results for this year so far (I like the site as it has a handy amount of other sports etc.).
I would usually then go edit/paste special - unicode text and then hit the paste options, use the text import wizard, go delimited, tabs - and usually everything would come in on a row and then I could do what I need to do with it (e.g. use Excel's text functions to get the data - taking spaces out for example - to where I want it to do other things).
The problem I seem to be having now is that when I do the above - things no longer seem to come in on the same row (which makes life difficult for doing things easily with the data). Once things end up on different rows it becomes a pain to do basic things.
In short is there a way round this (or do I need to find another source for my data with tables laid out in a more friendly way to "borrow" data)?
I am building a code based on a command button in a row, which will check is a worksheet exists (message), if not create a worksheet from a template (from another worksheet specific to a on a cell value in the same row), rename the worksheet based on a cell value in the same row.
I am having some success for each task with exception to relative cell values .....
As the code will be specific to the row (one button per row) Questions:
how to i determine the location of the button that is clicked? (I assume once this is established i can use to pull values in the same sheet on certain columns....?)
I'm using Microsoft Excel for Mac 2011. I'm creating a drop down box from List within Data Validation. It's only letting my create a list of 17 names. My longest list is 63 names. What do I need to do to create a list that will support that?
What I need is to clear and lock some cells based on a drop down list selection.
The case is like this:
In Cell [E14] is a drop down list : 0,1,2 or 3
Cells: (D19:E19), (D21:E21), (D23,E23) Merged are PART DESCRIPTION
Cells: [G19], [G21], [G23] are COST
So I need when 0 is selected in the dropdown list, all of the above cells are cleared and no input is permitted, Cells locked.
If 1 is selected, just the first row is allowed for data entry and the other 2 are cleared and locked as this values populate another worksheet for calculations.
So far I did this code:
Private Sub Worksheet_Change(ByVal Target As Range)
I am trying to sort a list of business development leads. When a lead is dead I enter the date in the column entitled "Closed". Therefore, the Closed cell for active leads is blank. Whilst I still wish to retain the information of dead leads, when sorting I would like them listed at the bottom of the list. However, whenever I sort on the Closed column, whether using newest to oldest or oldest to newest, the blank cells are always at the bottom, instead of the top.
Sheet 1 will act as a summary for sheet 2, showing only the last 5 entries from sheet 2.
Sheet 2 is based on football results of a season which will have a total of 34 league games plus cup games.
Sheet 2 has 4 columns:
Game Number Home Team Result Away Team 1 United 2-0 City 2 Sportive 4-2 Uniao 3 Real 1-0 Ateltico 4 Villa 1-3 City 5 United 2-1 Real 6 Atletico 0-0 Villa
So sheet 1 will show the last 5 results as the season progress's and new data is added.
I have been able to extract column 'GAME NUMBER' using the following formula:
=INDEX('Back end 1'!A:A,MATCH(9.99999999999999E+307,'Back end 1'!A:A)-ROWS('Back end 1'!A2:A$6)+1)
I am struggling to find a way to pull the last 5 data that is text based.
