Expand Cell Width - Compile Error Procedure Too Large

Aug 8, 2012

The following code expands a cell width to size 42 when it is clicked on, then minimises it to size 9.29 when clicked elsewhere. Just what I need.

For instance, this would work for column 4.

VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Columns(4).ColumnWidth = IIf(Target.Column = 4, 42, 9.29)
End Sub

However, I need this to cover the first 1000 columns. More if possible. I can easily copy this 1000 times, changing the column number to then look like this (First 10 shown for example)

VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Columns(4).ColumnWidth = IIf(Target.Column = 4, 42, 9.29)
Columns(5).ColumnWidth = IIf(Target.Column = 5, 42, 9.29)
Columns(6).ColumnWidth = IIf(Target.Column = 6, 42, 9.29)

[Code] .....

The problem is if I do this 1000 times i get a Compile error that the procedure is too large. Is it possible to make the code more compact to basically cover all columns from 4 onward?

View 6 Replies


ADVERTISEMENT

Compile Error: Procedure Too Large

Jun 18, 2008

I am new to visual basic editor and I have a new position which right now has me copying and pasting a macro to hide all rows that contain zeros. I have attached a piece of it. There are 1,024 rows total and I got to row 479 and I get the error message.

It is telling me to "break up" the procedure, but I have no idea what that means or how to do it. There has got to be an easier way to do this.

Sub HideZeroCells()
If Range("g18") = "0" Then
Rows("18:18").Select
Selection.EntireRow.Hidden = True
End If
''
If Range("g22") = "0" Then
Rows("22:22").Select
Selection.EntireRow.Hidden = True
End If
''
If Range("g23") = "0" Then
Rows("23:23").Select.......................

View 9 Replies View Related

Compile Error Procedure Too Large When Trying To Run Macro

May 29, 2013

I am running into a Procedure too large error when running my macro. My macro is designed to replace a cell value with another cell value in a list. When the cell value is replaced a vlookup brings in new data to my workboook. Then the macro refreshes all the pivot tables and saves the workbork. I want my macro to repeat the above 60 times, so I have copied the code 60 times and changed the ActiveCell.FormulaR1C1 to point to the next value in my list. (Is there another way to select the next value from the list without changing the Row and Column number?) This is where my macro fails.

Below is my code.

VB:
Sheets("Data").Select
Range("B2").Select
[COLOR=#FF0000] ActiveCell.FormulaR1C1 = "=RC[25]" ' AGC GRP_ID[/COLOR]
Sheets("Ship pivot and cum triangle").Select
ActiveSheet.PivotTables("PivotTable4").RefreshTable
Application.DisplayAlerts = False

[Code] .....

View 9 Replies View Related

Error Message (Compile Error, Procedure Too Large)

May 20, 2009

I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?

View 14 Replies View Related

Compile Error / Invalid Outside Procedure

Nov 21, 2011

Compile Error: Invalid Outsid Procedure

I have Compile error coming up when I try to run Sub DeleteRecord on Sheet 2. It brings me to the VBE with sheet 1 code brought up and the Compile Error showing, with the xlup portion of the code highlighted. I okay the error and it highlights the Sub DeleteRecord on Sheet 2 with a yellow arrow.

Sheet 1 code as follows:

Dim y As Long
y = Range("A65536").End(xlUp).Row
Range("A1").AutoFill Destination:=Range("A1:A" & y), Type:=xlFillDefault
Range("J1").AutoFill Destination:=Range("J1:J" & y), Type:=xlFillDefault
Range("K1").AutoFill Destination:=Range("K1:K" & y), Type:=xlFillDefault
Range("L1").AutoFill Destination:=Range("L1:L" & y), Type:=xlFillDefault
Range("M1").AutoFill Destination:=Range("M1:M" & y), Type:=xlFillDefault
Range("N1").AutoFill Destination:=Range("N1:N" & y), Type:=xlFillDefault
Range("O1").AutoFill Destination:=Range("O1:O" & y), Type:=xlFillDefault
Range("P1").AutoFill Destination:=Range("P1:P" & y), Type:=xlFillDefault

Sheet 2 code at follows:

Sub DeleteRecord()
'
' DeleteRecord Macro
'
'
Application.ScreenUpdating = False
ActiveSheet.Unprotect
ActiveCell.Offset(4, 3).Range("A1:H2").Select

[code]....

View 3 Replies View Related

Compile Error: Invalid Outside Procedure (making Changes To Row)

Jan 16, 2009

I'm making changes to row A, but am getting an invalid outside procedure, not sure why. Don't even know what it means. It's not even in the same worksheet....

View 9 Replies View Related

Shell Function Compile Error - Expected Procedure Not Variable

Aug 8, 2014

I have a VBA shell script that worked just fine on another computer, but now it won't run.

The code that won't execute is:

[Code] ........

View 12 Replies View Related

Compile Error: Invalid Outside Procedure (execute Macro On Pivot Refresh)

Jan 27, 2009

I keep getting this error:

"Compile Error: Invalid outside procedure"

What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.

View 3 Replies View Related

Macro Error: Procedure Too Large

Mar 16, 2008

Auto Merged Post Until 24 Hrs Passes; Auto Merged Post Until 24 Hrs Passes; Auto Merged Post Until 24 Hrs Passes;

View 9 Replies View Related

VBA Select Case Error / Procedure Too Large

Aug 1, 2014

I have 30 different cases working well in one module so far. Now I need to add some more cases, but the system doesn't allow me to start defining any new cases under Select - Case, it shows: compile error: procedure too large.

I'm thinking maybe there's a way to combine multiple cases like Case 30, 31, 32 in one statement, and use if, else to define each one?? So the coding won't return the "Procedure Too Large" error? see my original coding as below:

counter = 0
colkey = 0
For Each cont In PriceForm.HaveFrame.Controls
If TypeName(cont) = "CheckBox" Then
counter = counter + 1
check = cont.Value
If check = True Then

[code].....

View 9 Replies View Related

Compile Error - Text Entered Too Large

Mar 10, 2014

The code I have (without splitting) is in the attached workbook (sheet1).

When you enter something into Column H, the value of =NOW() should appear in Column K.

The original code only went up to row 212 and it works fine. Now I need it to do the same up to row 411 but get the "Procedure too large" error.

I've tried some form of:

[Code] ....

but doesn't seem to work for me.

Attached File: OLE EXAMPLE.zip

View 10 Replies View Related

Excel 2007 :: Show Tooltip Of Column Width Of When Expand Column?

Dec 2, 2013

I am having a small problem with microsoft excel 2007.the problem is that: my excel 2007 cannot display tooltip of the column width when I keep and drag left mouse

Show tooltip of the column width as attached file.

I also tried many ways to find settings of advance menu. But cannot.

Pic.jpg‎

View 2 Replies View Related

Macro - Procedure Too Large

Oct 15, 2008

I am using following event macro and it repeats itself more than 300 times. I am at a stage where I am getting a message "Compile Error, Procedure too large", I tried to break it into two but that's not working.

Option Explicit
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
Dim cl As Range
Dim lng As Long
Application.EnableEvents = False

Select Case Target.Address
Case "$E$3"
If Target.Value = "Yes" Then
SelectNumber:
lng = Application.InputBox("Please enter number 0 to 100", , , , , , , 1)
If IsNumeric(lng) = False Or lng < 0 Or lng > 100 Then GoTo SelectNumber
Range("G3") = lng
Else: Range("G3") = 0

.................................................(above statements repeat more than 300 times for different cells)..............................
Application.EnableEvents = True
End Sub

View 15 Replies View Related

Clear Contents Macro For Merge Cell (Compile Error - Expected End Sub)

Jun 13, 2014

I'm trying to use the "clear contents macro" for merge cell, but I keep receiving this "compile error : Expected End Sub" error.

FYI, I have named my merge cells to "myMergedCells"

[Code] .....

View 3 Replies View Related

Copy And Paste Special Values But Getting Error 'Compile Error - Expected Function Or Variable'

Feb 7, 2007

I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:

Sub Macro6()
Cells.Select
selection.Copy
selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub

For which I get 'Compile Error - Expected Function or Variable'

View 6 Replies View Related

Vba Macro Error: Compile Error Named Argument Not Found

Apr 26, 2006

I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:

COMPILE ERROR:
NAMED ARGUMENT NOT FOUND

Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub

It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.

View 2 Replies View Related

Compile Error Syntax Error In Macro

May 17, 2014

VB:
Selection.FormulaArray = _
"=IF(RC[-7]=""Weekly"",RC[-1],IF((ParentCode=RC[-10])*(ClassType=""Active""),IF((EndDate=EOMONTH(EndDate,0))*(RC[-7]
={""Monthly"",""Quarterly""}),RC[-1],0),IF(RC[-7]=""Daily"",IF(SUMPRODUCT(((ParentCode=RC[-10])*(FundType=""C"")*
(ClassType=""Inactive Class"")*(TermDate<>"""")*(TermDate>=StartDate)*(TermDate<=EndDate))+((ParentCode=RC[-10])*

[Code] .....

I recorded macro for this formula its giving me syntax error i did " _" after the break but its still not working..

View 4 Replies View Related

Macro: Compile Error - Syntax Error

Feb 1, 2010

"Compile error - Syntax Error"

and the following line highlighted in yellow

"Sub CreateWorkbooks()"

It worked on Excel 2000 but not now and dont work either in Excel 2007.

Heres the complete code .....

View 9 Replies View Related

Compile Error ...

May 4, 2008

Can some see why this Code would fail intermittently?

This gets executed after a Commandbutton is selected.

The Error Message is attached.

View 14 Replies View Related

Compile Error: For Without Next ..

Sep 14, 2009

I am using the following code to put a combo box in my userform. When I try to run it I get the following Compile Error: For without next. What does it mean and how do I fix it?

View 9 Replies View Related

Compile Error: For Without Next

May 2, 2008

just make some files to make my work easier. Few too many watching the game last night, and I think im lost here. Am I attempting to do too much here ? I ran the first For statement Fine, but I cant get the second to work. I dont understand where my next statement should be entered.

View 4 Replies View Related

VBA - Error Handling: Determining The Sub Procedure

Feb 13, 2007

In an error handling procedure, I want to be able to capture the name of the Module and Sub procedure (macro) that the error has occurred in.

Is there any way to do this, outside of storing the name of the Sub somehow in a variable?

The Err.Source method seems to only contain very broad information, such as "VBA Project" when an error is encountered.

View 9 Replies View Related

Macro Error: Invalid Outside Procedure

Feb 18, 2008

I'm adding a new macro and getting the error message Compile Error:Invalid outside procedure. I'm using the following code

Dim wSheet As Worksheet
Dim vFound
On Error Resume Next
For Each wSheet In ActiveWorkbook.Worksheets
With wSheet
Set Tble_Array = .Range(Tble_Array.Address)
vFound = WorksheetFunction.VLookup _
(Look_Value, Tble_Array, _
Col_num, Range_look)
End With
If Not IsEmpty(vFound) Then Exit For
Next wSheet
Set Tble_Array = Nothing
VLOOKAllSheets = vFound
End Function

View 9 Replies View Related

Compile Error: Loop Without Do

Jul 20, 2009

VBA but familiar with other programming languages.

I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.

The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.

View 9 Replies View Related

Unable To Get Rid Of Compile Error In VBA

May 11, 2014

I am new to VBA. I have been getting compile error on the below code:

Public Sub hourCalculation()
Dim rcount As Integer
Dim rindex As Integer
Dim logintime As Date
Dim logoutime As Date

[Code] ..........

View 9 Replies View Related

Compile Error - Annying Pop Up

Jun 11, 2008

Every time I wrote something wrong I stupid and annoying pop windows appears and I have to press ok different times and be quick to correct the problem, otherwise it appears again.

View 9 Replies View Related

VBA - Formula Generating "Compile Error/ Syntax Error"

Dec 3, 2009

I'm trying to write a macro that will insert a excel formula into a specific cell. When I try to run the macro I receive a compile/ syntax error. I don't understand why as the formula works in excel. Here is the code (formula only)

View 4 Replies View Related

VBA - Use A Variable To Name My Object - Getting Compile Error?

Mar 19, 2013

I have an application that will require I create 20+ objects from a class I have created call "cWorkCenter." This is my first project using objects in VBA. I've created a string variable called "Title." THe application will loop through a list of resources on a worksheet, assign the name of that resource to the variable called "Title" (eg. Title=Range("A1")), then create an object named whatever the string is that "Title" represents. For example, if the first item in my list is "Resource1", then the first object created should be called "Resource1"

When I do this I get the following error: Compile Error: Duplicate declaration in current scope.

Below is the part of the code giving me trouble.

VB:
Public Title As String
Sub Loader_OO()
Title = "Resource1" [code].....

View 2 Replies View Related

Dim Statement Throwing Compile Error

Jun 10, 2014

I attempted to initialize values on a few Dim statements, but got compile errors: "expected end of sentence".

VB:
Dim sumTtl As Currency = 0
Dim searchTxt = "West"

View 4 Replies View Related

Get Compile Error - Sub Or Function Not Defined?

Apr 9, 2014

Trring to use function edate() in VBA macro, I've activated atpvbaen.xls in Tools/Register but get compile error:"Sub or function not defined".

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved