I find (what look like) two extra toolbars have appeared at the top (below the standard and formatting toolbars) and to the left of my worksheet.
They have lines, dots and little boxes with an x or - in them, depending if you click on them or not. The +/- box function seems to be to make columns appear and disappear.
How did I turn this function on and more importantly, how do I turn it off?
I am trying to run an SQL query to the worksheet of the workbook opened. This is worth noting, that this code is being called multiple times. Suppose if I have around 100 items in a listview, any item I will check or uncheck, this query will be fired. I tried selecting the five items, and the following code ran five times, and the excel ghost instance appeared.
View 4 Replies View RelatedI'm using Excel for holding lots of numerical data. Another software program pulls the information from Excel and is used to evaluate the data. The problem I am having is that some of the worksheets in my workbook have extra rows, and by "extra" I mean over 1,000 extra, blank, empty, rows. This means that in the other software program, it pulls over thousands of blank cells that have to be deleted every time it is opened.
View 6 Replies View RelatedI have attached the jpeg on my question. (attached the excel file). basically, on my selected range, it has number from 0 to 6 in the five columns. how can i set the formula (countif? or which other better formula) to detect if 4,1 and 1 exist in the range?
View 2 Replies View RelatedI have a sheet with about 20000 rows consisting of hundreds of names which
occur randomly.After each name is a date of the type 29-Jan-06.The dates are in ascending order.I wish to print in a third column how long it is in days since that name appeared previously in the list,if it never appeared before this will be zero.
This problem started after a lot of development of various macros in a moderate sized workbook.
I've gone back to various stages of development and am unable to find what is causing this one worksheet tab to jump to the beginning of the cue (to the left) when i first click on that tab.
Thought the most likely culprit was a worksheet change macro, but even after deleting that, the behaviour persisted.
When placing a control on a worksheet, the text in the label,option box etc controls is vertical and I can't find a way of changing the direction to left to right. It doesn't happen on all workbooks. I can put the control on a "normal" workbook and then copy it to the "abnormal" workbook but I would like to know why/how I can change the direction of the text.
Under Tools/Options/International the text direction states left to right
I have a worksheet in excel that I have hidden columns from AA right to the end. Which gives the user a nice worksheet with everything to the right of AA hidden in blue. What I would like to do is now centre the worksheet in the screen and have the same hidden blue effect to the Right of the worksheet in this blue.
View 1 Replies View RelatedI am looking to remove all blanks from a table I have and move all the data left. Right now the data is by date, and some dates are blank for some players (it is a basketball sheet) and filled for others, but I want to see it by game. So I have what is in the first table below, and I want it to look like what is in the second.
2-22-2014
2-21-2014
2-20-2014
2-19-2014
2-18-2014
[code].....
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I created a custom toolbar in excel. by right clicking on the toolbar, creating new, adding a couple buttons and assigning them to a couple macros.
I'd like to send this to people, how do i do this.
Obviously, the toobars's would have to reference the macros, these i have in an add-in.
Is there anyway that i could attach the toolbar's to the add-in so i could just send the add-in.
I also created a menu, is there anyway that i can put this into the Add-in also?
Where does the toolbar i created and the menu that i created save down. If i open a new excel without opening personal.xls, the toolbars will still be there (open one excel, then open another and it tells me that my personal.xls is in use by jason harris, i hit cancel so it opens without my personal workbook)
Lastly, if I open excel, then go into VB, I can save my personal workbook. How do I save this as or save a copy?
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
id
event_name
C83-858
sample_1_arm_1
[Code].....
I lost my command bar and tool bars (excel 97) all I have is the blue bar on top then the column letters. How do I restore them?
View 9 Replies View Relatedmy excel is no longer showing any tool bars and I can not get them back, is there any short cuts to bring back the menus? I can’t even do a right mouse click on the sells for some reason. The only tool bar that is showing is the formula bar.
View 10 Replies View RelatedI have a slight problem with some code I am using. I have a user form where I force the users to enable Macros using the hidden sheets trick. Once the user enables the macros all of the toolbars dissapear from excel. The code I use to do this is below:
View 14 Replies View RelatedI find that the picture toolbar opening automatically when I click on a picture useful (sometimes).
Is there anyway of automating other toolbars to open (such as 'chart') when I click on an object?
I've been looking at various add-ins in google - but can't find one to do that.
Everytime this meant that I had to start from scratch in order to have my customized toolbars. This is a bit inconvenient.
Can I simply save some file (containing my XL toolbar settings) from some location and if I ever run into such a situation again, I can simply copy the saved file back into the same folder...
Thanks in advance for your help and BTW would the solution work the same way for different Excel versions or?? My O/S is XP and I use both Excel 2003 (once in a while I also use Excel 97 but that is installed on my other old pc).
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
I am looking for a macro to hide all toolbars i am using this at the moment
View 4 Replies View RelatedA IT Ordering system has been created using Excel, I am prompted to enable Macros, no problem there. The problem is that when I exit the worksheet using a formulas setup as an exit button, my Excel is displayed with my Toolbars missing. I have been unable right-click at the top and re-add these I am only presented with the option to minimise, close etc. 1. How can I replace my Toolbars? 2. Is there a formula fix so that I can use this worksheet without losing my toolbars?
View 3 Replies View RelatedI use excel 2003 and have maybe 60-70 macros linked to buttons on maybe 6 custom toolbars. The macros are saved on a personal.xls that is saved in the XLStart folder so it will auto start every time I run excel. My excel crashed and my toolbars are all empty nubs and my personal.xls is still in the same folder but does not auto start...did a detect and repair no help...I manually started personal.xls no help...I found a thread that suggested looking for *.xlb didn't find it...a shared file with the same toolbars can be seen by other computers but not mine...
View 6 Replies View RelatedI want a code that removes all toolbars from excel when the .xls file is opened, then restores all toolbars back to their original setting when the .xls file is closed.
View 9 Replies View RelatedI ONLY want to show the status bar, worksheet tabs, horizontal and vertical scroll bars.
I've tried using the code below but the column and row headings will not show on the first sheet i bring up, but it reappears on other sheets. everything else works fine ....
is there any way that i can remove the excel title bar and scrolling tabs so that the excel sheet do not resemble an excel document?
View 2 Replies View RelatedThis code snippet works when executed from a worksheet (it puts Menu Bar back) but returns an error when used in the This Workbook module.
Application.CommandBars("Worksheet Menu Bar").Enabled = True
CommandBars("ToolBar List").Enabled = True
CommandBars("Ply").Enabled = True
I have a procedure that stores the Commandbar names and visibility settings in an array on open. Another procedure hides all Commandbars on open and restores their original visibility settings on close. For some reason the "Standard" and " Formatting" toolbars don't return to visible on close.
My error log says "08/13/07 18:21:37 [QA.xls]MCommandBars.bRemoveMenus(), Error -2147467259: Method 'Visible' of object 'CommandBar' failed". I have tried manually testing the hide/unhide procedure with hard coded settings and checked the correct variables are being sent and all seems to be correct.
I am pretty confident that the procedure to store settings is correct but have included the code just in case, also just noticed the "Standard" and "Formatting" toolbars are the only two visible at programme start.
Public gsaMenus() As String
Public Function bMenuSettings() As Boolean
Const sSOURCE As String = "bMenuSettings()"
Dim bReturn As Boolean
Dim iCounter As Integer
Dim cbrMenu As office.CommandBar
I have a custom toolbar created in a workbook. I have coded my workbook so that the full screen is displayed, removing the title bars, status bars etc
Application.DisplayFullScreen = True
However, there is still another menu option I am not able to remove. It is the "Add or Remove Buttons" and when you click that the "Customize..." button also is enabled.
I looked up some code on microsoft and only found code in office97 that gave me errors in 2003:
Sub DisableCustomize()
Application.CommandBars("Tools").Controls("&Customize...").Delete
CommandBars("Toolbar List").Enabled = False
End Sub
The quote from the site says "To prevent others from changing the menus and toolbars in a custom application, remove or turn off the Customize option on the Tools menu and turn off the Toolbar List shortcut menu."
I get an error saying invalid procedure when I run that.
how to disable the button or prevent users from choosing it?
I created 3 custom toolbars. I want toolbar A to be visible only in Workbook A.xls, toolbar B to be visible only in Workbook B.xls and toolbar C to be visible only in Workbook C.xls. while Workbooks A,B, and C are open at the same time. I use Workbook A to automatically open Workbooks B and C.
Problem: Since I'm openning the Workbooks automatically it only keeps the Toolbar C visible on all Woksheets.
I included the following code in the This Workbook Object on each Workbook:
For Workbook A:
Private Sub Workbook_Open()
Application.CommandBars("A").Visible = True
Application.CommandBars("B").Visible = False
Application.CommandBars("C").Visible = False
End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.CommandBars("A").Visible = False
Application.CommandBars("B").Visible = False
Application.CommandBars("C").Visible = False..............................
I have a macro that starts when the workbook is open that hides many of the headers and toolbars. It is great and works fine unless you are working on another workbook and need to see those headers and tool bars. Is there a way to display and hide those items per workbook and not for the entire application. here is my failed attempt:
Sub show_excel_headers()
Dim wb As Workbook
Set wb = ThisWorkbook
wb.Application. ScreenUpdating = False
'Display Headings in all worksheets
Dim wsSheet As Worksheet
Dim sSheetStart
Set sSheetStart = ActiveSheet
wb.Application.EnableEvents = False
For Each wsSheet In Worksheets
wsSheet.Activate
ActiveWindow.DisplayHeadings = True
I would like to hide the standard and formatting toolbars in excel when i enable workbook protection, however I have no idea how to get excel to realise when workbook protection has been enabled, and how to hide the toolbars in VBA also. Also i would like to know how to do the reverse (how to show tooldbars when workbook protection has been disabled)
View 3 Replies View Related