When I First Click On A Worksheet, Its Tab Shifts To The Left Of All Other Tabs
Dec 9, 2008
This problem started after a lot of development of various macros in a moderate sized workbook.
I've gone back to various stages of development and am unable to find what is causing this one worksheet tab to jump to the beginning of the cue (to the left) when i first click on that tab.
Thought the most likely culprit was a worksheet change macro, but even after deleting that, the behaviour persisted.
View 9 Replies
ADVERTISEMENT
Feb 27, 2014
When I enter a value into a cell and press "ENTER" or press the Right Arrow the whole spread shifts to the left instead of just confirming the entry of the cell and moving one cell(column) to the right.
This is a spreadsheet that I have used for over 3 years so something has changed in one of the settings.
I have Office 2003.
View 2 Replies
View Related
Mar 23, 2013
I am wondering if it is possible to drag & drop, via left-click, the data in a cell but WITHOUT affecting it's reference -- i.e., like "Copy here as values only".
View 1 Replies
View Related
Jul 20, 2006
I searched a few times for the answer to my problem, using different search terms, but I've come up somewhat empty (this *might* be because I'm not up-to- speed with Excel's terminology?). Anyway, my problem is this: I have a workbook which is designed to track various data for a corporate training course ( sheets for attendance, grades, tool logins, etc). After all of these are sheets numbered 1-25 (we never have more than 25 students in a class, but usually around 20). The numbered sheets correspond to the student's number in the on the class list sheet (so, the first student would have personal "report card" information on sheet 1; the eleventh student in the class list would have their information on sheet 11, etc).
What I would like to do is have some way of putting a button on the class list sheet which would look at student list and rename the sheets to correspond to the student names. For example, if the fifth student listed was 'John Doe', it would rename his personal sheet ('5') to 'John Doe'. Obviously, I would need to do it for all of the students, and IDEALLY it would then get rid of any numbered sheets which are not used (having 21 students would only rename the first 21 sheets, but then hide sheets 22, 23, 24, and 25).
View 9 Replies
View Related
Oct 22, 2008
Running into this issue of "transworksheet macros"
I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively.
What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet.
I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.
View 6 Replies
View Related
Jul 19, 2009
I find (what look like) two extra toolbars have appeared at the top (below the standard and formatting toolbars) and to the left of my worksheet.
They have lines, dots and little boxes with an x or - in them, depending if you click on them or not. The +/- box function seems to be to make columns appear and disappear.
How did I turn this function on and more importantly, how do I turn it off?
View 4 Replies
View Related
Aug 20, 2007
When placing a control on a worksheet, the text in the label,option box etc controls is vertical and I can't find a way of changing the direction to left to right. It doesn't happen on all workbooks. I can put the control on a "normal" workbook and then copy it to the "abnormal" workbook but I would like to know why/how I can change the direction of the text.
Under Tools/Options/International the text direction states left to right
View 6 Replies
View Related
Dec 22, 2006
How can I get the worksheet tabs to show?
I have gone to : Tools,option and the sheet tabs box is checked
View 9 Replies
View Related
Sep 4, 2013
I have a worksheet in excel that I have hidden columns from AA right to the end. Which gives the user a nice worksheet with everything to the right of AA hidden in blue. What I would like to do is now centre the worksheet in the screen and have the same hidden blue effect to the Right of the worksheet in this blue.
View 1 Replies
View Related
Feb 23, 2014
I am looking to remove all blanks from a table I have and move all the data left. Right now the data is by date, and some dates are blank for some players (it is a basketball sheet) and filled for others, but I want to see it by game. So I have what is in the first table below, and I want it to look like what is in the second.
2-22-2014
2-21-2014
2-20-2014
2-19-2014
2-18-2014
[code].....
View 3 Replies
View Related
Feb 20, 2010
In the attached WB - the formula, in Col. "D", seems to be too long - although returning the expected result. Could somebody lighten my eyes with a much shorter formula ?
View 3 Replies
View Related
Jan 3, 2008
I can only view one worksheet at a time with a particular spreadsheet. There are no tabs to click at the bottom of the screen to view the other worksheets. In excel 2007, if I click on View, then Full Screen, I get the tabs (so I can view the different worksheets) but then I lose the menu and formula bar (so when I click on a cell I can only see its contents and not the formula). I need to see the formula that is applied. This has not happened with other S/Sheets, just this particular one. what else I can do to view the worksheet tabs without full screen view?
View 7 Replies
View Related
Apr 20, 2009
Is it possible to name a worksheet tab from a cell reference on a worksheet?
View 6 Replies
View Related
May 18, 2005
I have been presented with a rather odd thing with Excel. We have a wookbook with six worksheets in it. When the first of worksheets is displayed, all the other tabs "disappear". The whole bottom tool/navigation bar is no longer displayed. How can I get it back?
View 8 Replies
View Related
Jun 22, 2007
i got a question for anyone to help me with. i need help in figuring out how to type in a cell (A1) making it changing the worksheet tab as well. I watched Episode 452 of mrexcel's podcasts, but i cant see the text that he typed in. Can anyone help me with this problem or link me to another post where this same problem has already been answered.
View 6 Replies
View Related
Nov 19, 2009
I have a vb code that merges all the tabs(sheets) in my work book. however i need to know how i can change my code so it only mergers certain tabs.
here is the code i have:
Sub Merge()
Dim ws As Worksheet
ActiveSheet.UsedRange.Offset(0).Clear
For Each ws In ActiveWorkbook.Worksheets
If ws.Name ActiveSheet.Name Then
ws.UsedRange.Copy
Range("A65536").End(xlUp).Offset(1, 0).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Selection.PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
End If
Next
End Sub
View 9 Replies
View Related
Aug 23, 2006
I've received a workbook that contains maybe 60+ worksheets. To navigate the workbook, a person must use the hyperlinks on each sheet. However the worksheet tabs do not appear at the bottom of the sheet. I've checked Tools / Options / View / Sheet Tabs and the checkbox is checked. II've also tried unchecking and rechecking the box.) There are no custom views created.
View 2 Replies
View Related
Feb 16, 2007
I found the following "sort worksheet tabs" code by searching through the threads.
Sub SortSheets()
Dim lCount As Long, lCounted As Long
Dim lShtLast As Long
Dim lReply As Long
lReply = MsgBox("To sort Worksheets ascending, select 'Yes'. " _
& "To sort Worksheets descending select 'No'", vbYesNoCancel, "Ozgrid Sheet Sort")
If lReply = vbCancel Then Exit Sub
lShtLast = Sheets.Count
This code works fine but I need to adjust it a little. I have over 70 worksheets that will need to be sorted. At the same time, there are about 6 worksheets that I dont want to sort and want to keep right infront all the time.
View 6 Replies
View Related
Mar 16, 2007
I've done a search for this but cant find the complete answer for what I'm looking for. Basically I've got a "Home Sheet" set-up where the user can only navigate to worksheets via the buttons on the home page (with a short- cut to go back to the home page). It works ok (very basic though) but the user can still use the worksheet tabs at the bottom of the screen to navigate (making this system void).
how I can, either, hide the worksheet tabs at the bottom of excel, or, a better way of navigating these worksheets (there is only about 6 of them).
View 2 Replies
View Related
Jul 16, 2014
knew if there was a way to hide the available tabs in an excel worksheet.
I know you may be thinking just right click and hide, however what I am looking for is a little different.
Basically I have a Macro Enabled work sheet which works on a "one click" system. The work sheet is full of buttons with assigned macros and data validation drop down boxes which link to many different tabs. The entire sheet is for information only so I will be locking the sheets to avoid data manipulation. The problem with right clicking and hiding the tabs is that it interfears with the macros.
All I really want to do is make these tabs not visible. I have set the sheet to open in full screen mode and they obviously are still there, but this is basically what I am looking to do. Not so much hide them in terms of sending them into the background, more so make them "drop off" the bottom of the screen to they are still active but not visible.
View 6 Replies
View Related
Jun 29, 2011
I have a spreadsheet that is sent to me monthly. Here is the issue:
Each workbook contains multiple tabs. The position of those tabs may be different positions when received.
The part of each tab's naming convention does not change, while the rest of the tabs' name contains random information.
My question: Is it possible to to search/find the tab based on part of the name?
example: Name on tab:
Pivot Table Data June 2011
Search for: Pivot
View 3 Replies
View Related
Jul 23, 2013
is there a method to do this besides writing them out individually?
View 5 Replies
View Related
Sep 5, 2013
I don't know VBA code but i am familiar enough to know that a code can be written to separate out information into different tabs on a worksheet.
For example, I have a standard worksheet with say 20 columns going across and 20,000 rows going down. At each "name" change in row 1, I would like a macro to copy into a new tab. Basically the end result will have a tab for each name and the corresponding columns that go with the name.
View 2 Replies
View Related
Feb 6, 2014
I need to create a Worksheet within a macro that has 10 tabs. I had something running, then I made some changes and I got Application-defined or object defined error.
Sheets("Sheet1").Name=Sheetname(1)
Sheets.Add after:=Sheets(Sheets.Count)
I was looping thru this up to 10 now its not working. This isn't too complicated,
View 9 Replies
View Related
Aug 7, 2008
Is it possible to hide specific worksheet tabs.
I have a workbook with many worksheets and I only want to hide Sheet1 and Sheet2.
View 9 Replies
View Related
Aug 12, 2009
I am trying to do is populate one worksheet (in the same workbook) with data from many (ie 500) separate tabs. An example is as follows:
On the summary data worksheet, we will call Price Highs, I am trying to return one column of data from each of the 500 worksheets (aka their Price Highs). This is so that I can have each tabs (symbols) data next to one another for easy formula dragging and analyzing. Up to this point I have been using the Find/Replace function, but with this many worksheets I would obviously have to do it 500 times!
View 9 Replies
View Related
Aug 14, 2009
I would like to create a macro that would bring up an input box or preferably a list box that will allow me to input information for a sheet/tab name where where "TBL NPL NGRPL" appears in the code at the end of this message. The macro needs to be available to any new file created
The only worksheet names needed are below.
TBL NPL NGRPL
TBL NPL NIAU7
TBL NPL NIAU8
TBL NPL NIA10
TBL NPL NNDU4
This is the extent of my ability:
Sub Macro1()
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "TBL NPL NGRPL"
Range("A1").Select
End Sub
I created six macros, but there must be an easier way.
View 9 Replies
View Related
Feb 27, 2009
This macro helps me create a blank worksheet and automatically names it from the list in column A. Unfortunately, it adds the worksheets to the left of my 'master' sheet called "Tab Names". When I try adding "after" when it adds a new sheet, I keep getting a "compile error: Expected: end of statement". I am positive you will know what steps I'm missing.
' Vendor List Subroutine to
' Open New Worksheet called Tab Names worksheet
' With data from Tab Names
' Rename sheet to name from list and start again
' For all names in list
Sub NewTabsFromList()
Dim cCell As Object, i As Integer 'Two variables cCell (current Cell) object and i (standard counting integer)
Cells(1, "A").Select 'Ensure that we start each time at the top of the worksheet
Application. ScreenUpdating = False 'Turn of screen updates whilst macro is running
For Each cCell In Range(Cells(1, "A"), Cells(1, "A").End(xlDown)) 'Will run our code through each cell with text
Set NewSheet = Sheets.Add(Type:=xlWorksheet) 'Add new worksheet
NewSheet.Name = "Tab Names Worksheet" 'rename worksheet
Sheets("Tab Names worksheet").Name = cCell.Value
Next cCell
End Sub
View 4 Replies
View Related
Jan 24, 2007
I have an excel spreadsheet with various worksheets, each worksheet is named different according to tests that must be performed. Each test is different and inputed by rows, there is one column from each test in which we populate "passed", "failed", "pending", "N/A", or "user issue".
The problem is searching for all the "failed", and "user issue's" throughout all the tabs. I want to create a tab which will identify and display all the "failed", and "user issues" on one tab, and sort it according to its tabbed test name. Now, not to be picky, I would like to copy only a few cells along with the failed message, if not, the entire row would be fine. Could anyone assist? to sum it up, I want to create a sheet that'll identify all the issues existing throughout tabs.
View 3 Replies
View Related
May 18, 2007
I have a workbook with 37 sheets in it. 36 of them are three per month (e.g JanCash, JanWeekly, JanMCR, etc) Since we make updates/ changes to the file throughout the year I cannot reuse the files. Also since we have accounts on different fiscal years, I need a way to rename the sheet tabs from a list. Does anyone know how I can do this with VBA code?
View 2 Replies
View Related
