I have an excel sheet with multiple pivot tables. I would like to customize the output based on a criteria when I double click on these pivot tables. Criteria could be different for each pivot table. Criteria for each pivot is to auto fit the contents, delete certain columns and format the contents.
View 1 RepliesWhat happens when I double click a cell in a pivot table?
Or when I double click the grand total?
I can't figure it out it simply doubles the value the only thing i can think of is the totals in question that are related to subtotaled columns but is not subtotaled
View 9 Replies View RelatedI have a pivot table that has about 20 categories of Asset Numbers as a filter. I use the show pages function to create individual sheets for each category, but I don't want pivot tables to be the output; I want the detail from the pivot table (the rows that are displayed when you double-click the grand total). I have been messing around with various macros, but can't seem to find the right commands to get this output.
View 9 Replies View RelatedIs it possible to put bi-directional output in pivot table? PTexample.xls. Explanation is in example
View 5 Replies View RelatedI believe in the past that I have told Excel to send the output of the pivot table to different worksheets. For example if I have three regions- the pivot table would send the output to three worksheets and name the worksheets with the three regions.
View 5 Replies View RelatedI'm using Excel 2003 and am unable to find the name of, and therefore customise, the right-click shortcut menu that pops up when you right-click on a line drawn from the 'Drawing" toolbar. Basically, I'm trying to do some technical analysis on a chart. I want to be able to right-click on the lines that I draw on the chart and replicate a parallel line.
View 3 Replies View RelatedI upgraded to Excel 2010 from Excel 2000 a couple months ago. In Excel 2010, after double-clicking on values in a pivot table to create a new worksheets, I'm unable to highlight those worksheets and add a column to all of them. I was able to do this in Excel 2000... I can't figure out what's stopping it from happening for the life of me. Am I missing something obvious here?
View 3 Replies View RelatedI am unable to right click anywhere inside a pivot table in any sheet i... i have to create a new pivot table in a new workbook and I am unable to right click over there too.
View 1 Replies View Relatedexcel data table within the charts. I would like to customize the data table placing underneath the chart so I can highlight (say, in red) some of the figures that are greater than certain values for easy reference. Is there anyway I can do with it (since I got more than 800 charts) than that I can only use tools to draw a rectangle and cover that particluar cells up? or is there any ways I can link up the conditional formatting of the data itself with the chart so I can applying certain coloring on the data and reflect on the data table?
View 3 Replies View RelatedEvery time I make a pivot table I change the formatting ie column width but when I press refresh it goes!
I am trying to write some questions on cells of Sheet1 of a workbook. Then I want to write the answers on cells of Sheet2 of the same workbook. I want the user to be able to double click the question-cell on Sheet1 and be taken to the respective answer on Sheet2.
View 6 Replies View RelatedI have a spreadsheet that just uses the basic "SUM" function. This morning I went to use it and the function does not work after I change a number within the field of that function. If, however, I go into the SUM function and double click, then hit enter, it does the new calculation.
View 3 Replies View RelatedI'm trying to simplify some data entry on an excel sheet, by making a double click vba to add a time any where in 2 columns, specifically H and I .
[Code] ....
I tried to modify this code but my understanding of VB is very lacking.
I have this list of all rangenames in my workbookin column A:A
For some reason I want to doubleclick on the rangename in the list to activate this range.
The reason is that I want more smooth activation-prosess; The Excel Range List is too long to practical use as a direct lookup, so I want to activate directly from my own list (where i have added definitions to the range names.
I have tried to build a hyperlink formula, but failed. Maybe the macro below can be modified to do the job, but I am stuck here as well.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim RangeName
Application.ScreenUpdating = False
If Target.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A:A")) Is Nothing Then
Cancel = True
[Code] ...........
I seem to have broken something!. Whenever I double-click to open an Excel file (.xls files are associated correctly), Excel opens, but nothing happens. That status bar says "Ready," but my workbook never appears.
If I do a File-> Open within Excel, then I am able to open the workbook. I have no idea what is going on. This occurs for all Excel files whether they contain macros or not.
I have a code for doubleclick on a cell and a gdt application chart will open.
Private Sub Worksheet_BeforeDoubleClicK(ByVal Target As Range, Cancel As Boolean)
ActiveSheet.Unprotect
ThisWorkbook.Unprotect
Dim i As Integer
Dim gdt As Long
Dim S As String
Cancel = True
With Application
If Target.Address(False, False) "C11" Then Exit Sub
'Place your direct path to open this GDT application
S = "C:Documents and SettingsUserMy DocumentsAndy's MachineINSPECTIONGDTGDT BitmapGD&T_Font.exe"
If Dir(S) = "" Then
MsgBox "File does not exist:" & vbCrLf & S, vbCritical, "Error"
Exit Sub
End If
gdt = Shell("""" & S & """", vbNormalFocus)
End With
ActiveSheet.Protect
ThisWorkbook.Protect
End Sub
What would the code be for a range of cells if doulbe clicked the range would be C11 thru C35
Also, I have a double click code for another symbol chart to open.
How, would this be used in the same manner if a coulmn or row were to apply on double click.
here is what i am trying to accomplish:
on the worksheet there are six ranges...each range has three columns...the first is team name, the second is rep name, and the third is the metric being measured.
what i would like to happen is...
when a team name is double clicked in any one of the ranges, i would like all three cells (team name, rep name, and metric) to be boldfaced and have the cell interior change color for all instances across all six ranges that match the team name double clicked. when double clicked again, it should go back to original formatting.
likewise, when a rep name is double clicked in any one of the ranges, i would like all three cells (team name, rep name, and metric) to be boldfaced and have the cell interior change color for all instances across all six ranges that match the rep name double clicked. when double clicked again, it would go back to original format.
so for example, if i happen to click on a cell in the team column in the second range for "team a", all cells in each range (including the adjacent cells for rep and metric) would be highlighted.
I have populated a listbox from a filtered list and when 'Double Clicking' a name I want a macro to run. All seems to be OK apart from it is not finding/returning any data; I know the data is there and I think it may be the way I'm referencing the listbox value;
Sub CopySignificant()
Dim DestSheet As Worksheet
Set DestSheet = Worksheets("Clients to Invoice")
Dim sRow As Long 'row index on source worksheet
Dim dRow As Long 'row index on destination worksheet
Dim sCount As Long
sCount = 0
dRow = 1...................
I am trying to create code so that when a cell in Column C (for example C1) is double clicked, it makes the font bold, italicized, blue and inserts a row below the double clicked cell. I am also trying to make it so that if the cell is double clicked again, it removes the bold, italics, blue and deletes the row that was previously inserted.
Private Sub Worksheet_BeforeDoubleClick _
(ByVal Target As Excel.Range, Cancel As Boolean)
If Target.Font.Bold Then
ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select
Selection.Insert Shift:=xlDown
ActiveCell.Select
Cancel = True
If Not Target.Font.Bold Then
ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select
Selection.Delete Shift:=xlUp
ActiveCell.Select
Cancel = True
End If
End If
End Sub
I want a X to be put in the activecell if empty or removed if already there. By searching this forum I found and read the article "Adding a Command Button to the Excel Right Click Pop-up Toolbar/Command Bar" and was able to add the code to do this to the right click sub menu. Is there a way to do the same thing by double clicking on the cell? This probably seems a bit nit pickey but I would just like for it to work using double click for my users. I wrote the following code to performe the action
Sub Toggle_Macro()
If IsEmpty(ActiveCell) = True Then
ActiveCell.Value = "X"
With Selection
.HorizontalAlignment = xlCenter
End With
With Selection.Font
.Name = "Arial"
.FontStyle = "Bold"
.Size = 12
.ColorIndex = 3
End With
Else: Selection.ClearContents
End If
End Sub
And placed the code below in Private Module of the Workbook Object.................
formatting the sub-row header of the table also changes one of the columns.
View 6 Replies View RelatedI have a table (attached example with only a SMALL part of all data) I would like to transform this into pivottable format without copying and pasting. In row 2, all of the numbers pertain to years. Column B has the number of years in force for each property account (Column A). I
View 2 Replies View RelatedHow can you visually format a column with multiple values in a pivot table? Say you have month in the column section, and three values in the value section: budget, actuals, variance; I want to visually seperate each month's set of data.
View 1 Replies View RelatedI have a sheet that comes from a pivot table that I have to format each month. It's a pain I was hoping a macro might be able to do. I was told this is the place to come for this. I have attached the the sheet unformatted and formatted. Note, there are 2 more columns on the finished sheet I add in to show totals. Also note col A has to be re-ordered each time (Safety, Environmental, Security, Vehicles, Operations).
Not sure about the complexity of this. Let me know. And let me know if I need to supply more info.
I am trying to run a macro when I double click on a certain cell (D34). The cell has data in it (Southeast NSC). What I am expecting to happen is once I double click on the cell the macro will run the retrieve and I will end up at expense chart page.
The macro I am trying to run is an Essbase retrieve.
[Code] ....
I tried using the macro below but no luck:
[Code] ....
And i tried:
[Code] ....
I have set double click event to open my userform.
It opens normally, but when I try to close It, It opens again. After that I can close It normally.
I checked Userform code, but can't figure out why event triggers twice. What's wrong ??
This is my double click code :
[Code] ......
Testing my worksheet, I found that if I double click on any cell that is not locked, the worksheet becomes unprotected. I need to prevent this from happening. I tried the following code, but it didn't work.
View 6 Replies View RelatedI'm using a little sub routine to bring up a pop up calendar when i click in a cell, everythings lovely but it annoyingly comes up when i select a clolumn or row that also contains that cell. modification to require a double click to display the calendar?
View 2 Replies View RelatedIn Excel is there a shortcut key the replaces using your mouse to double click to get into the cell?
View 2 Replies View Related