I have a cell with 10-digit number. The sixth and seven digit gives me information that I want.
I want to be able to somehow use a formula to get the sixth and seventh digit for about 300 cells...rather than doing it manually.
="autECLSession.autECLPS.SendKeys """&B4*100&""""
B4 is 3.00% and I need it to be 03 no %, 3.00%*100= 3 but I need anything less then 10 to be two digits still (1-9)
This would be the perfect end result:
autECLSession.autECLPS.SendKeys "03"
and for over 10
autECLSession.autECLPS.SendKeys "10"
I know you can take a number from one cell and combine it with number from another cell and make it one number. What I need to do is the reverse. Take a two digit number in a cell and separate it into single digits in two cells. If you have the number 50 in a cell, then is there a formula that will take the 5 and put it in cell and take the 0 and put it in the cell beside it?
View 4 Replies View RelatedI have a column of 6 digit numbers in excel, and I need to remove the last digit from each number, turning it into a 5 digit number. No rounding, just simply remove the last digit. Each number is different. Does anyone know how to quickly and efficiently remove the last digit from each number? I can convert to alphanumeric string if need be...
View 4 Replies View RelatedHow to calculate a check digit in excel. The details to calculate this are as follows:
All variables in the calculation are positive integers.
We take each integer of the pro number and multiply it by a value and sum them to get a total.
An Example: 8 Digit Pro Number: 66988757
Pro Number: 6 6 9 8 8 7 5 7
Position in the Pro Number: 1 2 3 4 5 6 7 8
Multiply each digit in the pro number by (10-position) in the number, to achieve a sum.
Using our example pro again:
6*(10-1) + 6*(10-2) + 9*(10-3) + 8*(10-4) + 8*(10-5) + 7*(10-6) + 5*(10-7) + 7*(10-8)
6*9 + 6*8 + 9*7 + 8*6 + 8*5 + 7*4 + 5*3 + 7*2
54+ 48+ 63+48+40+28+15+14 = 310
Take the Sum of the previous calculation and divide it by 11
310/11 = 28
(Actually, it's 28.181818, but since we're working with integers, we truncate everything behind the decimal).
Figure a remainder by multiplying the quotient by 11 and subtracting from the sum.
Remainder = 310 - (28*11) ---> Remainder = 310 - 308 ----> Remainder = 2
Check Digit = 11- Remainder
Check Digit = 11 - 2 ---> Check Digit = 9
Note: if the check digit is 10 or 11, need to subtract 10 from the Check Digit.
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
View 9 Replies View Relatedto copying a formula from one column to the next adjacent column and also incrementing the 2 numeric values inside the formula. Please see attached sample.
One value increments with each new column whereas the other increments with each new row. Please see attached sample.
And in the last row there is the average formula which must copy the new column and average the new column.
I tried to create a Macro in attached but it did not work with formulas.
I am trying to track inventory over 160 days in a spreadsheet. Every week I update a table that shows the number of skus and dollar amount that are over 160 days in a table. I have a ton of formulas that will automatically populate once I put in the new weekly data on a different spreadsheet. I want to track the weekly data so what I would really like to be able to do is paste the actual numbers and not the formulas into another excel spreadsheet so I can track the progress over time. Is there a way to just paste the actual numerical number instead of the formula itself?
View 2 Replies View Relatedhow you can determine if a cel value is a number or a digit
It is actually for a column to determine if it has a heading or not and acordingly y have to count the rows off that "current region" and put some values with a formula next to this column.
Y was testing an expression with this
msg = IIf(target.End(xlUp).Value = "X", "is this a LETTER", "is this a DIGIT")
Well I want to add few numbers in a few number for example I have ten columns containing few cell numbers and i want to add 92 my country code with it. I have tried this by using replace formula but in result it comes in text format from which i cannot use another formula unless text format is removed and for that i have to do it one by on in every single cell. I have attached a sample sheet.
View 4 Replies View RelatedI have the following dates in a column and need to convert them to the short date format:
91113 (Sept 11, 2013)
100713 (Oct 07, 2013)
122612 (Dec 26, 2012)
40413 (April 04, 2013)
Those are just some examples. When I convert these as is I get dates that are really far in the future. Some dates are 5 digit and some are 6.
I have the following
[Code] .....
AK5 value will be 2 - 21.
I need it to display
A1D05
or
A1D21
or whatever the number is after A1D, but when AK8 = a value of 1 or 2 or 3...... It comes back as A1D1 or A1D2... How ca I keep the two digits in AK8 to stay and put the value the way I want in AE5 ...
I'm trying to figure out how to setup a worksheet to find the most common 2 digit numbers going vertically from the bottom(cold) to the top(hot) it would consist of 90 digits 0 thru 9
it would look like this
4 0 3 9 0 4 3 3 2
9 2 5 6 5 6 9 6 6
8 9 9 3 1 0 2 9 8
1 6 7 5 9 9 8 2 5
2 7 2 2 2 8 5 1 3
0 1 4 7 4 7 6 0 9
3 5 6 4 3 3 0 4 4
7 8 8 1 8 5 7 8 7
5 4 1 8 6 1 1 5 1
6 3 0 0 7 2 4 7 0
each vertical line would be considered weeks 9 thru 1. week 9 would be the first vertical line of digits on the left. it could also contain the most common 2 digits horizontally. Both 2 digit values would be color coded ex. blue equals most common 2 digit horizontally and green equals vertically. I would also like to color code the most common 2 digit value diagonally as long as it is the most common of either the vertical or horizontal 2 digit. Each number is seperate on the worksheet they would not be pairs. im using excell 2003.
The last digit of a number (can be any demonination but always an integer). I know that you can check the last digit of a number with =RIGHT(A1,1) but I would like to check whether the last digit in number is 1,2,3,4,5 and if so change the whole number to a number ending in 5. If the original number ends in 0,9,8,7,6 then I want it to be changed to end in 9. Is this possible and if so is there an excel function that I could use??
e.g. 143 -> 145
e.g. 1037 -> 1039
I have a cell with a number which is a result of several previous sums. It's a number with 8 to 11 digits. For example: 878567663.
I need to add each digit of the number, and then add again the result until I end up with a single digit. In the above example it'd be (8+7+8+5+6+7+6+6+3=56), then (5+6=11), then (1+1=2) and put the end result (2) in a cell
My main doubt is that I don't know how to use a simple "do while" type structure in Excel to achieve the above.
Questions:
1.) How do I create a formula to do that?. I have seen solutions in this board that let me add each digit but that's it... I need to "reduce" it until only one digit is left...
2.) What about if the lenght of the number is not always the same (fe. in one cell is 8, in another is 11, the next one is again 8...)?
I need composing a formula that will add a space after every 4th Number in a 16 digit Character Set.
ex. 0101 0101 0101 0101
I am trying to get a formula to return the last digit from a number in a cell as a number.
If the cell (B3) contains a number such as 164 or 34 I want to return a value of 4 and have it be formated as a number.
I have tried =RIGHT(B3,1) and it returns a 4 but I cannot get another formula to recognize it as a number.
It shows up in the cell on the left side as text would and if I format it as a number nothing happens it is still on the left and the formula does not work.
I'm trying to search a column that has cells with various length strings. Included in the strange (at random locations) could be possibly be a 7 digit number starting with 4. I want a formula that counts the number of cells with contain that 7 digit number. Is this possible?
View 11 Replies View RelatedI have a cell containing body of an email.How can i check for 15 or 16 digit number in the text and extract it. Basically i am checking for a credit card number in the email and if it is there then i need to extract it to adjacent colum.
View 4 Replies View RelatedImage below has a 500 cells I want to delete the 12 digit number but the numbers that align to the 12 digit was in one cell so it is hard to do manually how to delete it
View 6 Replies View RelatedI am using following formulae to convert 16 digit number to with validation that number is not exceeding 16 digits and should always start with "1" else it should give Error with 11 blank spaces
(IF(LEN(L2)+LEFT(L2)=17,TEXT(L2,"0000000000000000"),"ERROR"&REPT(" ",11))))
but when I input any number which has a value other than zero e.g. 1009510010000059 its returning result as 1009510010000050 I need validation also in the same formulae
I would like to attribute a number to each digits 1 in position.
IJKLMNOPQRSTUVWXYZAAABACADAEAF1
12345678910 2 3 4 0111110010 234569 5 1110010000 1236 6 1010010110 13689 7
I have this script that does what i need it to do but one thing, I need the script to count the numbers as digits only and not the dashes in the format.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Count 1 Then Exit Sub
If Intersect(Target, Range("I21:I24")) Is Nothing Then Exit Sub
Application.ScreenUpdating = False
Application.EnableEvents = False
If (Len(Target) > 11) Or (Len(Target) < 10) Then
MsgBox "Not a valid number of characters, please try again"
Target.Value = vbNullString...................
20081110120000[0:GMT]
is there a way to convert many entries of dates and time entered in the above way into actual dates and times? is it as simple as making a custom format? if so, whats the syntax?
the entries appear to be the year(4 characters), the month (2 characters), the day of month (2 characters), and the time of day (6 characters, AM/PM)
i dont need the time, so the last part ("120000[0:GMT]") isn't necessary.
I have a spreadsheet with approx 11,000 rows and I would like to generate a unique 9 digit number for each line.
I know I could just put 100 000 000 and then increase that by one all the way down but I was wondering if there was any formula or code
I need to extract a set of 5 numbers from a string of characters. The number set I need is always 5 digits long, always starts with a 1, and always begins after a period. But the number I need can occur in different parts of the string:
In each example below I would want to extract only the 10572 portion.
5194003.10572.N
5194003.10572.R
5194003.1.0010785.10572
7500008.N.5999900.10572
Additionally (if possible) if the cell is blank I don't want anything to show up, and if the string begins with a letter then I don't want anything to show up either.
I have an 8-digit number like this :
06152002
06 = year 2006
152 = day number 152 in the year
002 = sequence of entry
Is it possiable to transfer that number into date in one cell and the sequence of entry in another cell ?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address <> Range("B3").address
End Sub
I would like to change the target to ceratin cells in my active row. How would I write the code to achieve this.
Nice to meet you all. I'd be grateful for any help I could get on this as I have tried it and I'm a bit stumped...
What I need to do is the following:
Convert a 4 digit number (e.g. 1234) in a single cell to a 4 letter string (e.g BCDE) and have the output appear in another cell.
The conversion should be as follows:
0=A
1=B
2=C
3=D
4=E
5=F
6=G
7=H
8=I
9=J
0=K
So, for example, 3678 in one cell should be converted to DGHI in the target cell.
In my macro, I have a variable 'logDate' that is a 6 digit date in the format mmddyy
If 'logDate' falls on a Monday then I need to set another variable 'd' to equal 1, if Tuesday then 2 etc.
ie: 'logdate' = 062308 I need to set 'd' =