I need a formula to take away a percentage according the amount (number) ot procedures.
For example:
- procedure - price for one - 5 of it - 10% discount - final price
The idea is, for example, if I type amount of 5 procedures, automaticly to make 10% discount, if I type 10 procedure - make 15% discount etc.
I have attached a 2004 excel document that has a conditional statement that says, if an amount is over $400.00 you get a 10% discount, else, the cell says no discount. That is working fine. I also have a absolute cell ready to do the math for the 10% amount. There is also a column that shows the discount amount and column that shows the amount after the discount has been applied. Since I have been just doing one calculation and auto-filling, my problem is, how do I get the record that doesn't get a discount (no discount) not to apply the 10%?
View 4 Replies View RelatedIs there a way to insert a discounted row at the top of an existing spreadsheet?
I'd like to name it "0" or "Row Zero" or "MasterRow" or something similar, such that the existing rows retain their original numbering, and none of the existing code is effected.
I need to create a price list a we give a discount based on the price of the product for example:....
All products over £100 have a 10% Discount, how do this and also at the sametime round the value up to 0.99p. ie Product ZXY123 is £123.99 10% off is £111.59 we need the calculated price to be £111.99.
how to get the discount to work the way I need to. As is, It requires a person to put in the actual amount that I will discount the product for each product sold. I would like to simply key in the discount percentage. EX: 10% or 13%
View 14 Replies View RelatedIf I explain all the 8 steps , it will be lengthy and not easy to explain , thus I will go step by step
See file attached raw 01 , copy it on drive c directory called DISC , see file attached the result file
I want the the result file to go fetch data from the folder created DISC in which there is file called raw 01 and do the following with pulling headers , since the header is already plugged.
a to a
b to b
c to c
d is thus empty for the second step of the macro ( explain following after this fetching is achieved )
d to e
e to f
f to g
g to h
h to i
j to k
k it should not copy
I have a quote system which takes data from tabbed sheets if there value is greater than 0, then does a simply formula which is then times by a discount which found by searching for the sheet name and then attaching the appropirate discount. In short this means that the whole forumale doesn't work and is not displayed
View 11 Replies View RelatedA customer has an overdue account, we will say in the amount of $500.00. We offer various discounts, 30%, 20%, 0% depending on the circumstance.
What I had previously worked flawlessly, that is until the higher ups changed how things had to be calculated.
Previously, we would take the amount owing and apply the discount (ie 20%) which would become the new amount due ($400).
We would then take the discounted amount and separate it into monthly payments:
$400.00
1st payment 60.00
2nd payment 60.00 (and so on)
6th payment 60.00
7th payment 40.00
Done.
The new way they want it calculated is (Same situation $500 owing, 20% discount).
$500.00
1st payment 60.00
2nd payment 60.00 (and so on)
6th payment 60.00
7th payment 60.00 *
8th payment 60.00 *
9th payment 20.00 *
Done
(*these would be the discounted amount, it would be stated that these payments would be removed if payments are made on time and in full yadda yadda).
The trouble I am having, is figuring out a way to tell excel to flag the specific payments. The reason behind it (i guess) is so that if a client becomes delinquent, the full amount owing would be sent to collections, not the discounted amount owing.
I'm looking for assistance with working out the following formula. I live on an apartment complex in Marbella Spain and we pay Monthly Community Fees of say $100.
We want to calculate a penalty amount for late payers of say 30% of the monthly fee due for non payers? So for instance if the monthly amount due in Cell D8 = 100 and the actual amount received in cell E8 shows 0 or then increase any figure due for the following month in Cell F8 should increase by 30% ($ 130) in the following month. and so on
I use Excel ver 2003. Trust my query is reasonably clear?
I'm very new to excel, my boss request me to create a discount calculator. A cost of price is given. We have a fix discount rate of 5% of that cost value. Some new customer want more percent of discount to the item they purchase. To deal with that, a markup price will be quoted then we will make a discount according to what the customer prefer but the final discounted value will be always be the discounted 5% of our cost value. I've problem creating it because as example; the customer request for 15% discount, when I add the cost + 10% then minus it back to 15%, the value I get will no be the same of the fixed reduced 5% value of my cost value.
ac16xpZ.jpg
I'm trying to work out how to get a spreadsheet to calculate when it works out cheaper to buy more of something, due to quantity price breaks, than less... e.g. 1-10 are £12.50 each, but 10-20 are £10 each and 20-30 are £8.75 each.. so it's as cheap to buy 10 (10x10=100) as it is 8 (8x12.50=100) and cheaper to but 10 (100) than it is to buy 9 (112.50) than 10... but there are similar price breaks at 20, 50 +
View 9 Replies View RelatedI would like to ask the formulas for this... for example:
$35 .. discount 10% + 25%
instead of having so many cells to calculate $40 x (100%-10%) = $36
$36 x (100% - 25%) = $27
I want to take the value in I and apply a 10% discount to it and place the new value in column M. Would it be possible to have this new value rounded up or down to the nearest 9.
Example:
Column I=7.99
Column M=7.19
Column I=7.59
Column M=6.83 (however I would need it to be rounded to the nearest 9. The price I would need would be 6.79)
Column I=2.19
Column M=1.97 (however I would need it to be rounded to the nearest 9. The price I would need would be 1.99)
I need to get 5 small subs into 1 sub. (run the whole program by pressing once.
Please see attached file with codes : ServiceDriftMaaling.rar
I have a 4-level program. The levels are Club, Bronze, Silver and Gold. Each is awarded when a certain amount of points are gathered.
Club is 0 to 19 points and yields an 11% discount.
Bronze is 20 to 44 points and yields an 12% discount.
Silver is 45 to 59 points and yields an 11% discount.
Gold is 60 and better and yields an 11% discount.
I am looking for a way to total the points and have the spreadsheet automatically calculate the leve and percentage. So if my total points is 22, I would need the formula to return "Bronze" in one cell, then "11%" in the next.
How would I create a simple user form to display a price based off the category selected.
User types in List Price, then selects 1 of 4 discount categories, it then displays that price.
An added bonus would be copying that price to another sheet, but not necessary..
My question is about passing arguments to UserForm procedures. I've created a Main procedure. Main calls a sub procedure and returns an array. Obviously Main can now use the array. But then Main calls a sub procedure to open my userform.
All of my userform sub procedures need to use the array I created in Main. Do I have to pass the array into all of my userform procedures? Into the UserForm_Show procedure? And then again into UserForm_Initialize? And then again into ComboBox_Change? I don't understand how to give my UserForm procedures the array from my Main procedure.
MS Query can only hold 16 joins and some other restrictive requirements. Has utilized Stored Procedures to execute a query and have the results returned to Excel? Query in Excel seems very limited.
View 2 Replies View RelatedI have a workbook with no data sheets showing with all actions being taken by the use of Userforms.
To make the workbook look consistent I would like to use a Userform rather than the standard MsgBox, the problem I cant seem to work around is passing the result of a Command Button back to the original proceedure.
I am trying to work along the lines of this but I am not sure where I am going wrong.
This procedure would call the Userform and then provide the next action dependant on the users choice:
Public Sub Testing()
Call TestMe
If Ans = Yes Then
Sheets("Sheet1").Range("A1").Value = "Yes"
Exit Sub
End If
If Ans = No Then
Sheets("Sheet1").Range("A1").Value = "No"
Exit Sub
End If
If Ans = Cancel Then........................
I've seen this done a lot while reading. I've also had help with some code by a few members that have suggested doing this.
View 8 Replies View RelatedHave a bit of code to list all procedures in project to a sheet. Idea from Chip Pearson, adapted with help from Norie. List procedures in module/project Reference is set to MS VBA Extensibility. Thought solved, but trying to use now only lists one procedure in the project Namely the procedure in the module identified here :
Set VBCodeMod = ThisWorkbook.VBProject.VBComponents("mdl_comp_pl_ProcedureList").CodeModule
I tried many variations by stopping at
Set VBCodeMod = ThisWorkbook.VBProject
But receive error message
Objest doesn't support property
Option Explicit
Sub raw_pl_ProcedureList()
'Uses reference to Microsoft VBA extensibility
Dim VBCodeMod As CodeModule
Dim StartLine As Long
Dim Msg As String
Dim ProcName As String
Dim wbBook As Workbook
Dim wsList As Worksheet
Dim rngProcedure As Range
Dim intCounter As Integer
intCounter = 1
With Application
.DisplayAlerts = False
.Calculation = xlCalculationManual
. ScreenUpdating = False.........................
I received a suspicious email from <Excel Help/VBA Help: [forum@ozgrid.com]>. It may be nothing but I am wanting to inquiry about it's origin and content, how would I do this? I of course have received other emails from this site.
List Price $46.98 (e2)
Net Cost $19.53 (e3)
How do I enter a calculation that will show me my discount percentage from my supplier? (e4)
I then need to be able to drag the formula to the end of the sheet. Discount percentages will be different for each product, but the List Price and Net Costs are present, so the calculation needs to take these differences into consideration so that I get the correct discount percentage for each item.
I have a problem with the overreaction of my VBA function procedures. Basically, I have an input section with 1000 rows and 10 columns and an output section with 1000 rows and 40 columns. Each cell in the output section is with fomula:
View 3 Replies View RelatedI am running this code it is rather long, but I need to show it all ?
Code:
Public Sub Monday()
Dim mName() As Variant
Dim lName() As Variant
Dim fName As String
Call lower(CStr(mName(q)), fName, CStr(lName(q)))
[Code] .........
How to do is to pass the value of convert to the other procedures that are being called? As you can see I know how to pass variables down to "Sub-routines" but how would I pass the variable up?
I have a procedure in Access, MySub, stored in Module1.
To call it from Excel, I use the following:
Code:
Dim AccessApp As Access.Application
Set AccessApp = New Access.Application
With AccessApp
.OpenCurrentDatabase Filepath:="C:My location", Exclusive:=True
.Run Procedure:="MySub"
End With
Supposing for argument sake, there is another procedure also called MySub saved in Module2 in Access.
The above code will no longer work as it won't know which MySub to call.
How can I specify the correct one to choose? Of course I can rename the procedure in Module2 to something else.
I am trying to determine if it's possible to control the order of like events. In other words, if I have set up two Worksheet_Change events, can I control which one fires first? Or, as a second best, can I determine which one will fire first?
I am using Office XP on Windows XP, but I'm looking for a generic solution if possible.
If I'm starting in Sub #1 and I have turned screenupdating off, then later in the procedure I call a function that also has screenupdating off (and also back on at the end of the function), will I get a slight flicker here? I'm noticing a slight one, and I can only imagine that it's where the screenupdating is being triggered again. (removing the updating from the function isn't an option, because another procedure calls the same function & needs it turned off)
View 2 Replies View Relatedpassing variables within procedures on a worksheet. i have:
Private Sub lblGoToMaterials_Click()
'email to:
'----------------
'grab current position
myRow = ActiveCell.Row
mycol = ActiveCell.Column
and i would like to pass the values gotten in myRow and mycol to:
Private Sub cmdGoBackTo_Click()
Application.Goto Reference:="R" & myRow & "C" & mycol
what do people meen when they say target and how is it used from what i can gather its somthing to do with the active cell?
View 9 Replies View Related