How would I create a simple user form to display a price based off the category selected.
User types in List Price, then selects 1 of 4 discount categories, it then displays that price.
An added bonus would be copying that price to another sheet, but not necessary..
I'm trying to work out how to get a spreadsheet to calculate when it works out cheaper to buy more of something, due to quantity price breaks, than less... e.g. 1-10 are £12.50 each, but 10-20 are £10 each and 20-30 are £8.75 each.. so it's as cheap to buy 10 (10x10=100) as it is 8 (8x12.50=100) and cheaper to but 10 (100) than it is to buy 9 (112.50) than 10... but there are similar price breaks at 20, 50 +
View 9 Replies View RelatedList Price $46.98 (e2)
Net Cost $19.53 (e3)
How do I enter a calculation that will show me my discount percentage from my supplier? (e4)
I then need to be able to drag the formula to the end of the sheet. Discount percentages will be different for each product, but the List Price and Net Costs are present, so the calculation needs to take these differences into consideration so that I get the correct discount percentage for each item.
The job cost controller is not exactly what I need, so I have been trying to create my own. So far my progress has got me to be able to separate each laborer for each job.
Here is my query: I have a drop down menu that lists ten different tasks(i.e. carpentry, painting, demo, etc.) and I want each of the ten tasks to separate themselves. Is this a vlookup function? How do I make excel listen?
I have attached a 2004 excel document that has a conditional statement that says, if an amount is over $400.00 you get a 10% discount, else, the cell says no discount. That is working fine. I also have a absolute cell ready to do the math for the 10% amount. There is also a column that shows the discount amount and column that shows the amount after the discount has been applied. Since I have been just doing one calculation and auto-filling, my problem is, how do I get the record that doesn't get a discount (no discount) not to apply the 10%?
View 4 Replies View RelatedI need to create a price list a we give a discount based on the price of the product for example:....
All products over £100 have a 10% Discount, how do this and also at the sametime round the value up to 0.99p. ie Product ZXY123 is £123.99 10% off is £111.59 we need the calculated price to be £111.99.
In a financial environment we have a calculator which uses iteration to allow for a cost being added to loan amount where the cost is based on the total loan amount. Iteration is set to 100 iterations with max change .001
On one PC the first time the calculator is opened it gives a particular (incorrect) result. If the input cells are cleared and the data re-entered, it gives the correct result. This only happens on one particular PC. Is there some other setting , other than the iteration setting, that would cause this?
I'm looking for assistance with working out the following formula. I live on an apartment complex in Marbella Spain and we pay Monthly Community Fees of say $100.
We want to calculate a penalty amount for late payers of say 30% of the monthly fee due for non payers? So for instance if the monthly amount due in Cell D8 = 100 and the actual amount received in cell E8 shows 0 or then increase any figure due for the following month in Cell F8 should increase by 30% ($ 130) in the following month. and so on
I use Excel ver 2003. Trust my query is reasonably clear?
I am creating a new form, and have 2 option boxes. I have linked these checkboxes to a cell which gives a calculation depending on what is selected (cell E10). If the value of this cell is 2, then the person has selected that they don't need to fill in the details below. If this is the case then I would like to hid the entire rows below (rows 18 - 45 to be precise).
At the moment I have used data validation to blank out these rows, but I'd much rather group them automatically to avoid a large gap between the option boxes and the next section.
I really don't know how to code a checkbox correctly. On the sheet, I have a form with CheckBox1 and Checkbox2. I would like Checkbox2 disabled until Checkbox1 is checked. Also, when Checkbox1 is checked, display Image1, otherwise Image1 is hidden. When CheckBox2 is enabled and checked, display Image2, otherwise Image2 is hidden. I know this is real beginner stuff, I'm still a rookie.
View 4 Replies View RelatedI have 2 forms. Form1 and Form2. I load Form1 to display. A button on Form1 calls Form2 to display. After I hit Cancel-Unload on Form2 it doesn't dissapear. How do I get rid of the residual image of pesky Form2 after I unload it and only display Form1 WITHOUT having to reload Form1 after Form1 calls Form2
In English
Form1 Displays
Form1 call Form2 to display
Form2 is unloaded by hitting a button on Form2
Form2 is unloaded, however, it's image still displays!!!
Need some way to force screen to refresh without having to unload Form1!
set up a cost based markup spreadsheet?
I need to be able to mark up values from 0.01-9.99 by 20% of their value, and 10.00 and above by 10% of their value.
I only know how to mark up values by a single percentage.
I need a sum of amount based on the Cost center & Category from the details table , can i have a formula to get them .
Please find the example amount in the attached excel sheet highlighted in RED Colour.
i. I currently have a spreadsheet which is used to forecast resource cost for a project. The forecasted cost is calculated on a few factors - rate, allocation, contract start and end date, and expected days worked per month. One of the mods actually helped me out with this a few weeks ago.
I now have been told that there is a possibility that certain resource costs may change in the new year and that will need to be reflected in the sheet whilst keeping the historic information.
For example - XXX has a rate of £200 p/d, allocation is 1, working 18.83 days p/m and is working from 01/01/09 to 01/06/09. The current formula will work out his cost per month until contract end. Now say his rate will be changed to £150 p/d from the 01/03 and all other info remains the same, I need the sheet to calculate his revised cost from 01/03 onwards and not change the calculation previous to that month.
Now Ive actually managed to figure that part out myself by adding in two columns (over-ride rate and over-ride date) using a nested IF statement. The only problem is that if the new rate starts mid month then it will still calcuate the original amount for the full month and the revised amount from the next month.
Edit - Also, could someone advise as to how do I remove my old attachments as I have almost used up my allocation.
I have two idential spreadsheets with several rows of items each with different packaging quantities, price break quantities and corrisponding prices next to each break quantity. I'm trying to build a discounting sheet on an idential page by using formulas that read off the price sell in the same relative position on sheet 2. Below is one row of sheet1 and the idential row of sheet2 - underneath the cells are the rules I would like incorporate:
Sheet 1
ABCDEFG
1Pack QtyQty 1Prc 1Qty 2Prc 2Qty 3Prc 3
210010.91000.744000.6
Sheet 2
ABCDEFG
1Pack QtyQty 1Prc 1Qty 2Prc 2Qty 3Prc 3
210010.91000.744000.6...........................
I need to make an automated way of extracting a list of IDs and the associated cost by a date range, say 6/1/2015 to 12/31/2015, plus the starting letter of the ID. I need the data to then fill a form where it can be sub-totaled. There are several additional columns of data that are not relevant so I know I can create a pivot table and then filter the data, but then I need to copy and paste the filtered data into the form. Is there a way to do this without me copy and pasting everytime?
I added a test worksheet to show the data and form.
I have a database with a few hundred records. I can display the Data Form using Excel but receive the following error when I try display the DataForm with VBA? "ShowDataForm method of Worksheet class failed"
View 3 Replies View RelatedI have been using the GetOpenFileName method and a message box to return the filepath of a file and saving the filepath in a variable called Filepath. This worked just fine.
What I want to be able to do is display the the file path at any time in a message box, but not sure how to do this. I tried displaying the message box in a form and was going to look for some way to call the form, but the form does not return the message.
My code for this is as follows:
Module 1
Sub getfilepath()
Dim filepath As String
filepath = Application.GetOpenFilename(FileFilter:="All Files (*.*), *.*", Title:="Select a file")
UserForm1.Show
End Sub
Userform 1
Private Sub OkButton_Click()
Unload UserForm1
End Sub...........
Looking for a formula for total cost based on a list of hours for each employee and a table of rates for each employee.
Please see attached file : Formula.xlsx‎
I created a data entry form that contains a ComboBox. The ComboBox is based on a range that has three columns and many rows. The purpose is to have the user select an item from the first column, and the other two columns are automatically filled in on the table.
The form works and the data is transferred to the table as it should. The issue is that when you select the ComboBox, it displays the data from all three columns wrapped in two columns. Some of the data is repeated and it looks confusing. How do I have the drop down show only the data in the first column?
I have inserted a FileListbox in the form.
it displays all files but not folders how can i display folders?
secondly i want to select and open the selected file.
I am simply trying to delete all rows that have a value of less than 16 in the cell value's first 2 characters (column G).
Start with:
18N
18K
16K
16K
16K
14L
14L
13L
12L
End with:
18N
18K
16K
16K
16K
The code I am using:
Sub DeleteUnneededRows()
Dim c
For Each c In Worksheets("Sheet1").Range("G1:G500").Cells
If Left(c.Value, 2) < "16" Then
c.EntireRow.Delete
End If
Next
End Sub
but it is not working.
I would like a lookup that takes multiple criteria and that is not an array formula! Unfortunately I decided to use array formulae and my spreadsheet went to over 45mb!! Not good. I've searched the forum for an answer to my questions but couldn't find any! I've attached a spreadsheet as an example. The examples I am using have {Sum(IF)} formulae in it (array) and I would like to change those to others that will not increase the file size so much and will not take too long to calculate.
Basically, I would like a lookup that will return me the Amount Paid and Full Cost based on the person's name and the date. the data and the results table are both on separate sheets. It would be nice to bring that file's size back down to less than 4mb!!
I created a table in excel, using it's Table feature, the first column has A - J, the second column has 1 - 10,
I then created a VBA form in VBA6,
How do i display that table and its 2 columns in a VBA form?
I need to display a selected area in an excel sheet in a VB form! I am not sure how to convert the selected area to an image ! The area already contains some images! I am attaching the file for ur refrence!
I need the portion which is within the frame to be converted as an image and get displayed in a Vb form!
i'm trying to put together a spreadsheet using excel 97 that uses forms for data input & display - the spreadsheet itself is used solely for data storage & no editing is done directly to ensure people aren't trying to mess about with the spreadsheet i thought it would be an idea to minimise excel when the spreadsheet is launched & have the forms pop up on screen instead. the problem i've got is getting the first form on screen whilst excel is minimised
Private Sub Workbook_Open()
frmSplash.Show
Application.WindowState = xlMinimized
End Sub
the spreadsheet launches, the splash screen launches, but excel doesn't minimise
if i use
Private Sub Workbook_Open()
Application.WindowState = xlMinimized
frmSplash.Show
End Sub
the spreadsheet minimises, but the form doesn't display - the excel taskbar button flashes to indicate something is going on clicking the taskbar button brings up the form & keeps excel minimised....but the staff who will be using this won't be happy with this at all!!!
I have a Excel database and a userform to look-up reocrds. I want to be able to connect a Data Sheet which is a PDF file to every product in the daatbase.
I have created an additional column and created hypelinks in front of each product. these hyperlinks are connected to the datasheet of that product which is saved on the drive.
I have created a field on the userform to display the respective hyperlink when a record is searched by user.
My problem is that the user form displays the hyperlink name, but its dead.
I want users to be able to click on the hyperlink to view the attached Datasheet. I have tried using Textbox and labels to display this hyperlink,
I have a list box that separates values based on simple criteria. I have these sections separated by
Code:
.Add Item "-------Cat 1------"
' Cat 1 items here
.Add Item "-------Cat 2------"
' Cat 2 items here
'etc
My question is can you add the "----Cat 1----" into the listbox without being able to select it? Or is there another way to separate listbox entries?
I would like to create a user form that will display the results from a lookup formula. The userform would have 2 textboxes, so from the formula below BZ109 would be textbox1 and CA109 textbox2. Once data is entered in these textboxes you would hit submit to return the results in a message box. What would the code be for the sumbit button?
=VLOOKUP(BZ109, INDIRECT(CA109), 11, 0)
Is there a way to insert a discounted row at the top of an existing spreadsheet?
I'd like to name it "0" or "Row Zero" or "MasterRow" or something similar, such that the existing rows retain their original numbering, and none of the existing code is effected.
