I have the formula in O62 cell :
[Code]....
In formula bar when I sellect complete formula and press F9 key, I can see:
[Code] .........
results.
How can I write this visible result to "O62" cell or, " another cell example"P62" as a text value.(without to copy & paste).
I want to make this with a formula ( if impossible by macro).
=CONCATENATE(B8,C8,D8) insread showing result just stays as text?
cant figure out whats wrong
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have the following formula: =TEXT(( SUM(D98,D117,D136))/12,"0")&"' - "&MOD((SUM(D98,D117,D136)),12)&""""
This formula adds the inches in D98, D117 & D136 and divides it by 12 to get the footage of the 3 cells. The problem occurs when you reach the half foot mark...for instance say D98 was 2-0 (24 inches), D117 was 3-0(36 inches) and D136 was 2-6(30 inches) added up this comes out to 7-6(90 inches)...the formula then rounds the footage up to 8 feet...this can understandably be frustrating when I'm trying to get an exact measurement...is there a way to force the formula not to round up?
I have multiple sheets in excel file. Every sheet having same information for different areas. e.g. The bug was reported. One sheet might have answer in YES and other sheet might have No. I need to get answer YES if even one of sheet contains YES for the field.
View 9 Replies View RelatedI have two cells (c1 and c2).
c1 contains (2+3*4)*3 without "=" at start.
c2 must contain the result of c1 it means 42.
In the attached file I have a few variants I tried to solve it but they both don't fit.
Formula.xls
I have two cells (c1 and c2). c1 contains (2+3*4)*3 without "=" at start. c2 must contain the result of c1 it means 42. I think it has a very simple sulution but I don't know it. In the attached file I have a few variants I tried to solve it but they both don't fit.
View 3 Replies View RelatedI have a worksheet and in two of the cells I have text. In another cell I want to put a formula in so that if certain text is typed into each of the two cells a result will appear in the third cell.
Hazardous
Smiths
60%
Non Hazardous
Smiths
20%
Hazardous
Browns
45%
Can I put a formula in and if so, what formula would it be?
I have a spreadsheet where in cell E2 there is a drop down box with the following options to select: Warranty Replacement, Insurance Claim, Billing Issues, Retention Opportunities.
In cell F2 is where wait time minutes are generated depending on what is selected from the drop down box in E2. I am trying to create a nested IF formula for the following scenario:
Warranty Replacement = 20
Insurance Claim = 20
Billing Issues = 15
Retention Opportunities = 20
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
View 9 Replies View RelatedI have a value in Cell A1. Now, I need to be able to enter a number into Cell A3 and upon hitting Enter (or clicking elsewhere), the number I just entered into Cell A3 needs to be replaced with the number I just entered multiplied by the number in Cell A1. For Example: Cell A1 contains the number 1.05. I type 2.50 into Cell A3 and upon hitting Enter Cell A3 reads 2.625.
View 4 Replies View RelatedI'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
I need to use the result of a simple calculation in one cell on Sheet1 (=A1+2) as the row in a cell reference on a different sheet. eg =Sheet2!A"n" where "n" is the result of formula.
View 4 Replies View RelatedI'm working on someone else's spreadsheet, when I type in a formula the cell shows the actual formula as typed, rather than the expected result of the formula, how do Ii correct this?
View 2 Replies View RelatedI have a formula in a cell and when I use the formula bar it shows me the correct answer but it doesn't show me it in the worksheet. Only the formula shows up.
The same formula could be another place in my worksheet and work fine.
I have tried changing format. Copying formula from another location and changing the information to fit my needs it won't show me the result.
=K18+Sheet117!K18
K18 contains the number 54.00, and on Sheet117 cell K18 contains the number 404.00.
Cell A1 displays the formula rather than the result, which should be 458.00.
Other similar formulas I have in this workbook return a result of 0 when I know there should be a significantly higher number. Then, the same formula used to refer to different cells will return what appears to be a proper result.
I have created a visual schedule for my team using Excel (2003, SP3 if that matters). Essentially, the user puts in pre determined 1-3 character codes in individual cells, and the macros I have act like a complex Conditional Formatting to keep the formatting neat and consistent throughout the sheet. The actual values are inputted directly into the cells though (this is pertinent to my question), and are things like "A" "M" "$" and "TR"
I have a sheet for every day in a week. Since there are multiple team members on any given day, I have recently made another sheet which pulls a single Team Member's schedule Sunday through Saturday and displays their schedule for the entire week. I have used formulas (specifically VLOOKUP) to do this.
The problem that I am having though, is that the macros that I made to format the days of the week sheets, do not seem to recognize the result of the formulas in the individual Team Member's sheet, and thus do not format them as desired.
My macros are written to evaluate a cell's value via [ Range("example").value ] and will act upon it accordingly with more code. I am assuming that a [ Range("example").value ] would see a cells value as the text of the inputted formula, and not the result of that formula. Is there any way around this? or do I need to avoid the formulas all together and write in code to just copy over what I need?
(I hope this makes sense)
Sub startup
Dim numwords As Integer
numwords = WorksheetFunction. CountA("H5:H64")
Range("H1").Select
Selection.FormulaR1C1 = numwords
I have a quick question regarding this simple code thats been drviing me nuts. There x distinct pieces of Data in the range speciifed, but when i run this code, the reply posted in cell H1 is 1, instead of x.
Eventually the code will be built to check if the result is odd or even and then add an entry into the first blank cell if the result is odd.
How is this possible,
in cell A3, (''if'' cell A1 has text "transfers'')
then cell A2=7
Why is it that when I edit some cell's formulas and press enter the result is not the changed formula but the formula itself complete with the '=' sign infront of the fuormula. The work around for me is to cut the formula and paste it into a new cell then drag the old cell over the previous one I tried to edit.
View 3 Replies View RelatedI have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies View RelatedI'm trying to work out the way of having a cell give a result based on what has been input into two other cells.
Basically I'm doing up a risk management spreadsheet. I need to have in one cell the LIKELIHOOD of an incident, in the second cell, the CONSEQUENCES of it happening and ending up with a RISK MANAGEMENT ASSESSMENT in the third cell.
I'm typing the formula straight into the cell and funny thing happens: the cell displays the formula, but not the result...
SO now I can see =A2+B2 and no values.
I tried doing Ctrl + ~, but it did not work
View 14 Replies View RelatedI have a simple formula subtracting one cell from another using =SUM(XX,-XX). When I click on fx and bring up the function arguments box, the formula result is displayed correctly in that box. However, the cell containing the formula will only display a zero. I have tried reformatting the cells to no avail. I have also tried getting a result using =XX-XX and that does not work either.
View 10 Replies View RelatedOften I write the formula in the cell of an excel spreadsheet in vain, it does not work.
Excel only displays the formula in the cell such like = if(B2>2;2;0), and not the result.
Formula is correct, so I don't know why it happens. Most often this occurs when the formula is between worksheets or different excel files on the corporate server.
I am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.
=CONCATENATE(C5,"_",'Attachment 3-A'!C9:E9,"_",IF(C5="","",IF(C6="MPL",IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Lease","Lease_Contributable",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Pre-Lease","Managed_Pre-Lease",
IF(VLOOKUP(C5,MPL!B:F,5,FALSE)="Non-Contributable","Managed_Non-Contributable","Error"))),
IF(VLOOKUP(C5,Sale!B:F,5,FALSE)="Assignable","Lease_Assignable","Managed_Non-Assignable"))))
The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.
I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.
Can cell comments be returned together with the results of Index / Match function. If not is there any way to link the coments ?
View 3 Replies View RelatedI deal with a rather large excel database (the range is A1:AV168266) that contains customer information. Some of these various customers are affiliated with a group called "ascend" and I need to be able to filter all my list by every customer affilliated with Ascend. The trouble is that the word "ascend" can appear in 8 different columns and usually when it appears in one column it doesn't appear in the others and their can also be more text in the cell beyond the word "ascend". I want to create a formula that will simply look for the word "ascend" in any cell of a row and return a result I can filter by. I will be putting the formula in column AW and put it in all 170,000 rows of that column, that way I can just filter by a single column.
I've played around with combining COUNTIF with SEARCH and MATCH with SEARCH but nothing seems to work.