Formula Results In A Defined Name

May 7, 2009

Is I have a VLOOKUP formula which results in a defined name- great! but when I reference that result in another formula I get a #REF error, if I type the defined name directly in to the formula (index btw) all works but I need the formula to recognise the referenced cell.

Example

=VLOOKUP(B8,Cable.Table,2) this results in a defined name of a table (D1A) in cell B30

The cell B30 is named "table". I then have another formula in B33 which is:

=index(B30,B47,C12) or =index(table,B47,C12) Which gives me the #REF error

If I input =index(D1A,B47,C12) the function works but it needs to be the initial reference from the result of the other formula and recognise that it is a defined name.

View 3 Replies


ADVERTISEMENT

Application-defined Or Object-defined Error On Formula Entry

Aug 12, 2009

I'm trying to enter a series of formulas into a worksheet using vba. However, this code is giving me Run time error '1004', along with the description in the title. This is the first formula (they're all relatively similar).

View 2 Replies View Related

Change Formula To The Results Of The Formula For Cells That Have Results

May 9, 2006

I have a range that has formulas that are based on other fcells outside the range.

What I want to do is, if the cell has a value to remove the formula and paste the results. If the filed is blank (no results from the formula) to leave the formula in place.

There could be a marco to run when this process is needed.

example attached

View 9 Replies View Related

Results Show Results Of Formula, But Should Be Blank

Jul 27, 2006

I am trying to create formula that will show overtime worked in a given day. The code I am using is a simple one ([ cell - 8], for hours worked). The problem is when the time cells are blank/not used it shows a -8 in the cell. what I need to do to create a code that will eliminate the -8 from showing. The cell its self is taking the result from another cell with a formula and then subtracting 8 from the result of the formula in the other cell.

View 2 Replies View Related

Application Defined Or Object Defined Error When Creating A Pivot Table

Oct 1, 2009

I keep running into this error when I try to create a pivot table.

The debugger highlights the following line:

View 4 Replies View Related

Excel 2003 :: Stuck On User-defined Type Not Defined Error?

Oct 9, 2012

Trying to convert an Excel 2003 macro to work in Excel 2007.

The problem line is

Dim MyDataObject As DataObject

I suspect the problem is a Missing Reference, but I cannot figure out which one. I have the same ones (in 2007) as 2003 except for one which is not showing

Microsoft Forms 2.0 Object Library

Is this the one it needs? It is called something else in 2007?

The ones I do have ticked are

Visual Basic For Applications
Microsoft Excel 12.0 Object Library
OLE Automation
Microsoft Office 12.0 Object Library
Microsoft ADO Ext. 2.8 for DDL and Security
Microsoft DAO 3.6 Object Library
Microsoft ActiveX Data Objects 2.8 Library
Microsoft Scripting Runtime
Microsoft XML v2.6

View 8 Replies View Related

Set Bold To Font On Another Worksheet: Application Defined Or Object Defined Error

Aug 25, 2006

'Code1
Call movedata(1, rrow, ecol, erow)
'Contact Person
Call movedata(26, rrow, ecol, erow)
Worksheets("new").Activate
Worksheets("new"). Range(Cells(erow, ecol), Cells(erow, (ecol - 2))).Font.Bold = True
'Name
Call movedata(2, rrow, ecol, erow)
'Street Address
Call movedata(3, rrow, ecol, erow)
'city
Call movedata(4, rrow, ecol, erow)
' zip
Call movedata(5, rrow, ecol, erow)
Worksheets("new").Range(Cells(erow, ecol)).Font.Bold = True
' speed dial
Call movedata(6, rrow, ecol, erow)

the first time font.bold is set to true, it completes w/o error. The bolded line returns 'application defined or object defined error 1004'. Ive tried activating the new sheet immediately before setting bold (like the first time it gets set) but it still errors.

View 5 Replies View Related

Application-defined Or Object-defined Error :: Add Named Range At Run-time

Oct 4, 2006

Trying to add a named range at run-time

Here's what I have so far ...

View 9 Replies View Related

Application-Defined Or Object-Defined Error Setting Validation Message

Nov 10, 2006

I have problems with setting Validation input title and message. When in column "C" I type product code, data validation of corresponding cell in column "D" changes to list of diameters allowed for that product. That works fine. But i also want to set validation message to show allowed diameters.I set it in VBA using named ranges.
But for every second line (13, 15, etc on attached file) I get an application-defined or object-defined error. The rest (14, 16 etc) works ok.

View 4 Replies View Related

Excel 2010 :: User-Defined Type Not Defined Compile Error When Creating PowerPoint Using VBA

Jul 29, 2014

I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.

The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.

Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application
'
' do nothing for now
'End Sub

I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.

View 1 Replies View Related

User Defined Formula With CF

Jul 8, 2009

I'm having trouble getting a User Defined formula to work. I received an email containing a User Defined formula for SUMCOLOR and COUNTCOLOR. The first sums all the values in like-colored cells, and the second counts all the cells of like-color in a given range. The VB code for the module is as follows:

View 2 Replies View Related

Using A Defined Variable In A Formula

Mar 7, 2008

I have a macro which defines a workbook selected by the user as the name ServicingInfoFile.

The macro then proceeds to write vlookup formulas in another workbook to pull data from the ServicingInfoFile workbook.

Only problem is that the code errors out at the vlookup formulas every time.

Can I not use a Variable in a formula?

Is it just my syntax?

ActiveCell.FormulaR1C1 = _
"=VLOOKUP(RC[-1],'" & ServicingInfoBook & "'!C1:C2,2,FALSE)"

View 9 Replies View Related

Application-defined Or Object-defined Error On An Active Cell

Nov 22, 2008

I have a very strange problem in DEBUG mode, because i get this error "Application-defined or object-defined error" when referring to a cell and assigning it a value so it goes to my error handler and i have a Resume Next there. It continues to go through the code whilst continuing to go to the error handler but when i step out of the function it restarts again from the beginning on the called function and then on the second run of my code it seems to WORK!?! So i'm thinking what the hell is going on, it falls over and fails the first time round and works the second time round?
In free-run mode from excel i just get a #VALUE!

View 13 Replies View Related

Application-defined Or Object-defined Error :: On Open Everytime

Jan 13, 2009

I had to change sheet one but everytime I open this workbook, it keep saying "Application-defined or object-defined error"

but I cannot find what is causing the bug. I have checked the name of sheet and it seem correct for me in the codes.

View 7 Replies View Related

Range Selection Error (application-defined Or Object-defined)

Jun 9, 2009

I am having some trouble with a variable range selection within a regression. I keep getting an "application-defined or object-defined error." I've isolated each statement to find that the code that is causing the regression not to work is below (the error for that line of code states that the Select method of Range class failed):

View 6 Replies View Related

Application-Defined Or Object-Defined Error :: Subtracting Hours

May 23, 2007

I have a sub that takes the value of a cell and get the hour by using

mhours = Hour(KRT)

then using DateAdd I need to subtract the mhours from etd

and Im getting this error

Application-Defined or Object-Defined Error

Worksheets(b).Range("G" & q).value = DateAdd("h", mhours, etd)

Note: KRT and ETD are dim'd as Date
Note2: DateAdd returns the same error wether mhours is postive or negitive

View 9 Replies View Related

Application-defined Or Object-defined Error :: Range & Offset

Feb 26, 2009

this is the line it gives the error on.

Range("A1").End(xlDown).Offset(1,0).Select

View 9 Replies View Related

Sort Macro: Application-defined Or Object-defined Error

Aug 29, 2006

I get a run time error 1004 when I run this sort.

ActiveSheet. Range("A1:AC277").Sort Key1:=ActiveSheet.Range("G2"), Order1:=xlAscending, Key2:= _
ActiveSheet.Range("E2"), Order2:=xlAscending, header:=xlYes, OrderCustom:=1, _
MatchCase:=False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, _
DataOption2:=xlSortNormal

View 9 Replies View Related

AdvancedFilter: Application-defined Or Object-defined Error 1004

Nov 14, 2006

Im trying to copy all the unique values from one column to another and the easiest way seems to be:

Set SourceRange = Worksheets(page2). Range("C1:C17365")
SourceRange. AdvancedFilter Action:=xlFilterCopy, _
CopyToRange:=Worksheets(sida3).Range("B"), Unique:=True

However, I get the error- message: Run-time error '1004': Application-defined or object-defined error

View 2 Replies View Related

File System Object: User-Defined Type Not Defined

Nov 28, 2006

I had a working subroutine which I moved to another workbook (rather than linking to it and having both workbooks open at the same time).

Now I get "user-defined type not defined" when it runs. Here is the beginning of the
Global oApp As Object

Sub UpdateForecasts()
Call Update1
Call Update2
End Sub

Sub Update1()
Dim dPath As String
Dim dDest As String
Dim dCondition As String
Dim dName As String
Dim FSO As New FileSystemObject

View 9 Replies View Related

Concatenate Formula Nested Within IF Formula Is Not Producing Expected Results

Aug 24, 2014

I am trying to use a combination of Concatenate and IF formula to produce an email.

My input.

D4: First Name:
D5: Middle Name:
D6: Last Name:

D8: Organization:

Once all these are filled, I want the formula to produce a result like

FirstName.M.LastName@Organization.com

I have used the following formula.

[Code] .....

Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.

FirstName..LastName@Organization.com

How do I remove the additional (.) in cases where there is no middle name.

Attached File : Email Generator.xlsx‎

View 3 Replies View Related

Use A Formula To Set A Defined Name As The Range In Vlookup?

Jul 4, 2014

I have a number of data sheets in excel 2010 and I have price lists for various countries I need to automate a price book type thing whereby I create a formula which reads something like: Vlookup(X,=B1,3,true) whereby the cell B1 will be the result of a formula to return the country I need the pricing for. I have the ranges setup as things like: "Australia", "France" etc and the cell B1 shows this its value based on a previous lookup. Is it possible to get this to work?

View 3 Replies View Related

VBA - Replace / Convert Defined Name With Value Within Formula

Apr 23, 2012

I have a formula like

'=vlookup(Test,A$2:B$10,2)' where "Test" is a defined name based on a formula to a data connection (PowerPivot).

I need a macro to do something like f9 on just "Test" everywhere "Test" exists or convert "Test" to something like "test".value with out affecting the rest of the Vlookup formula. In some areas I am also using index match combos.

View 9 Replies View Related

Defined Names Not Recognised In Formula

Jun 1, 2007

I have a situation where I copy a worksheet to further on in the same workbook (essentially, using it as a template to create new sheets). I have certain cells that contain references to named ranges, e.g. on NewSheet1, cell $A$1 contains =StudyNo. Unfortunately, it shows as #NAME?. But, if I go to the formula bar and press enter, it resolves the name properly. I thougt maybe that automatic calculation was on manual but it is not. Why is this happening and what can I do to resolve it.

View 3 Replies View Related

Application Defined Or Object Defined Error 1004

Jun 1, 2009

I get runtime error 1004 "Application Defined or Object Defined Error" when I try to do the following:

View 4 Replies View Related

Application-defined Or Object-defined Error Using Range

Jun 5, 2009

So I'm correcting macro at work and keep running into this error:
"Application-defined or object-defined error"

View 5 Replies View Related

Application-defined Or Object-defined Error On One Machine But Not The Other

Jul 31, 2009

I'm trying to figure out why I can run a bit of code on my machine but on another machine I get an: Application-defined or object-defined error. The code is in an excel file on a network drive and it pulls up a form, once the form is submitted it runs some code that looks like so

View 2 Replies View Related

Excel 2010 :: Win 8 User Defined Type Not Defined?

May 5, 2013

Base 64 Encoding.

Dim objXML As MSXML2.DOMDocument
Dim objNode As MSXML2.IXMLDOMElement

Are causing the User Defined error, but the same workbook is OK in XP and Win 7.

VB6: Free, Easy and Quick Base64 Encoding and Decoding in Visual Basic [a NonHostile article]

Says you need a reference to Microsoft XML, v2.6 (or later) and the Win8/2010 workbook does have one for Microsoft XML, v6.0

View 1 Replies View Related

1004 Application-defined Or Object-defined Error

Jul 1, 2008

When opening a blank excel workbook I receive the error "1004 Application-defined or object-defined error". I press OK. And the message appears 2 more times before I am able to work in Excel. Doesn't matter what excel file I am opening, does the same thing. I do not know how to lookup programming code for any macros I am running. I would like to get rid of this error! It is a nusance.

View 9 Replies View Related

User-defined Type Not Defined - Command Bar Control

Mar 4, 2010

I am trying to capture with Worksheet Change a command bar action like paste but I am getting an error :

“User-Defined type not defined”

Do I need a library of sort in References ??


Public Sub Right_Click()

Dim oControl As CommandBarControl

For Each oControl In CommandBars("Cell").Controls
Debug.Print oControl.Caption
If oControl.Caption = "&Paste" Then
oControl.OnAction = "MyPaste"
End If
Next oControl

End Sub

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved